Blaupunkt porto cd27 User manual

Category
Car media receivers
Type
User manual

This manual is also suitable for

Radio CD
Madeira CD27 7 647 492 310
Porto CD27 7 647 482 310
www.blaupunkt.com
01MadeiraPortoCD27_de.indd 101MadeiraPortoCD27_de.indd 1 14.12.2006 9:38:21 Uhr14.12.2006 9:38:21 Uhr
Bedienungsanleitung
Operating instructions
Mode d’emploi
Istruzioni d’uso
Gebruiksaanwijzing
Bruksanvisning
Instrucciones de manejo
Instruções de serviço
Betjeningsvejledning
Instrukcja obsługi
Návod k obsluze
Návod na obsluhu
2
4
1
5
7
12
3
2
15 1013
6
8
9
11
14
01MadeiraPortoCD27_de.indd 201MadeiraPortoCD27_de.indd 2 14.12.2006 9:38:22 Uhr14.12.2006 9:38:22 Uhr
26
1 button
to remove the control panel (release
panel)
2 Button to switch the device on/off and
operate the volume mute feature.
3 Volume control
4 CD tray
5 LCD display
6 Arrow buttons
7
button
to eject the CD from the device.
8 ESC button
Confi rm menu item and return to the
display of the MENU or AUDIO main
level.
9 DIS button
Short press: Briefl y displays alternative
display contents (e.g. time).
Long press: Changes display contents.
: MENU
button (OK)
Short press: Calls up the menu for
settings.
Confi rming the menu selection (OK).
Long press: Starts the Scan function.
; AUDIO button
Sets bass, treble, balance and fader.
Selects an equalizer presetting.
Switching X-BASS on/off and adjust-
ing it.
< Keys 1 - 5
= TRAF button
Short press: Switches traffi c informa-
tion standby on/off.
Long press: Switches convenient RDS
function on/off.
> SRC/
button
Short press: Switching sources be-
tween CD, CD changer (if connected)
and AUX.
Long press: Briefl y displaying time.
? BND/TS button
Short press: Selects the FM memory
banks and the MW and LW wavebands.
Long press: Starts the Travelstore
function.
Controls
02MadeiraPortoCD27_gb.indd 2602MadeiraPortoCD27_gb.indd 26 26.10.2006 16:08:38 Uhr26.10.2006 16:08:38 Uhr
27
ENGLISH
Contents
About these instructions ..................28
For your safety ................................ 29
Scope of delivery .............................30
Detachable control panel ................. 30
Switching on/off .............................. 31
Adjusting the volume ....................... 32
Setting the power-on volume ...........32
Quickly reducing the volume (Mute) ... 33
Switching the confi rmation beep
on/off .......................................... 33
Muting during telephone mode ........ 33
Radio mode .....................................34
Adjusting the tuner.........................34
Switching to radio mode .................34
Convenient RDS functions ...............34
Selecting the waveband/
memory bank ................................ 35
Tuning into a station .......................35
Setting the sensitivity of station
seek tuning ................................... 35
Storing stations .............................36
Storing stations automatically
(Travelstore) .................................36
Listening to stored stations .............36
Scanning receivable stations
(SCAN) ........................................36
Setting the scanning time ................36
Programme type (PTY) ..................37
Optimising radio reception .............. 38
Traffi c information ...........................38
CD mode .........................................39
Switching to CD mode ....................39
Selecting tracks ............................. 40
Fast track selection ........................ 40
Fast searching (audible) ..................40
Random track play (MIX) .................40
Scanning tracks (SCAN)..................40
Repeating tracks (REPEAT) .............40
Interrupting playback (PAUSE) ......... 41
Confi guring the display ..................41
Displaying CD text .......................... 41
Traffi c announcements in CD mode ..41
Ejecting a CD.................................41
CD-changer mode ............................42
Switching to CD-changer mode ........ 42
Selecting CDs ................................42
Selecting tracks ............................. 42
Fast searching (audible) ..................42
Confi guring the display ...................42
Repeating individual tracks or
whole CDs (REPEAT) ......................42
Random track play (MIX) .................43
Scanning all tracks on all CDs
(SCAN) ........................................43
Interrupting playback (PAUSE) ......... 43
CLOCK time ..................................... 44
Displaying the time ........................44
Setting the time .............................44
Selecting 12/24-hour clock mode ....44
Displaying the time continuously
when the device is off and the ignition
is on.............................................44
Sound ............................................. 45
Adjusting the bass ......................... 45
Adjusting the treble ........................45
Setting the left/right volume
distribution (balance) ..................... 45
Adjusting the front/rear volume
distribution (fader) ........................45
Equalizer presettings (Presets) ........46
X-BASS ........................................... 46
External audio sources .....................47
Specifi cations ................................. 47
02MadeiraPortoCD27_gb.indd 2702MadeiraPortoCD27_gb.indd 27 26.10.2006 16:08:38 Uhr26.10.2006 16:08:38 Uhr
28
About these instructions
About these instructions
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
Read these instructions carefully and
completely before using the device.
Keep the instructions at a location so
that they are always accessible to all
users.
Always pass on the device to third par-
ties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Symbols used
These instructions employ the following
symbols:
CAUTION!
Warns about laser beam
CAUTION!
Warns about damaging the CD
drive
The CE mark confi rms the compli-
ance with EU directives.
Identifi es a sequencing step
Identifi es a listing
Use as directed
This device is intended for installation and
operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN
slot. Observe the 'performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a spe-
cialist.
Declaration of conformity
The Blaupunkt GmbH declares that this
car sound system complies with the basic
requirements and the other relevant regula-
tions of the directive 1999/5/EG.
Service
In some countries, Blaupunkt offers a repair
and pickup service.
Under www.blaupunkt.com, you can obtain
information whether this service is avail-
able in your country.
If you want to use this service, you may re-
quest a pickup service for your device using
the Internet.
Warranty
We provide a manufacturer's warranty
for products bought within the European
Union. For devices purchased outside the
European Union, the warranty terms issued
by our respective responsible domestic
agency are valid.
The warranty terms can be called up under
www.blaupunkt.com or requested directly
from:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim
02MadeiraPortoCD27_gb.indd 2802MadeiraPortoCD27_gb.indd 28 26.10.2006 16:08:38 Uhr26.10.2006 16:08:38 Uhr
29
ENGLISH
For your safety
The device was manufactured according to
the state of the art and established safety
guidelines. Even so, dangers may occur if
you do not observe the safety notes in these
instructions:
If you are installing device
yourself
You may only install the device yourself if
you are experienced in installing car sound
systems and are very familiar with the elec-
trical system of the vehicle. For this pur-
pose, observe the installation instructions
at the end of these instructions.
Observe the following!
Danger!
The device contains a Class 1 laser
that can cause injuries to your eyes.
Do not open the device and do not perform
any modifi cations.
In operation
Operate the device only if traffi c situa-
tion permits it! Stop at a suitable loca-
tion to perform more extensive opera-
tions.
Remove or attach the control panel only
while the vehicle is standing an.
Always listen at a moderate volume
so that you can hear acoustic warning
signals (e.g. police sirens) and protect
your hearing.Do not increase the vol-
ume when selecting a different audio
source or while the CD changer chang-
es the CD. The device is briefl y muted.
After operation
The device is worthless to a thief with-
out the control panel. Always remove
the control panel whenever you leave
the vehicle.
Transport the control panel so that it is
protected against impacts and the con-
tacts cannot become dirty.
Cleaning notes
Solvents, cleaning and scouring agents as
well as dashboard spray and plastics care
product may contain ingredients that will
damage the surface of the device.
Use only a dry or slightly moistened
cloth for cleaning the device.
If necessary, clean the contacts of the
control panel regularly using a soft
cloth moistened with cleaning alcohol.
Disposal of old unit
(EU countries only)
Do not dispose of your old device in
the household trash!
Use the return and collection sys-
tems available to dispose of the old device.
For your safety
02MadeiraPortoCD27_gb.indd 2902MadeiraPortoCD27_gb.indd 29 26.10.2006 16:08:38 Uhr26.10.2006 16:08:38 Uhr
30
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Support frame
2 Disassembly bar
1 Operating instructions
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by
Blaupunkt.
Remote control
The steering wheel and/or handheld re-
mote control allows you to access the most
important functions of your car sound sys-
tem safely and conveniently.
You cannot switch the device on/off using
the remote control.
You can fi nd out from your Blaupunkt dealer
or on the Internet at www.blaupunkt.com
which remote controls can be used with
your car sound system.
Amplifi ers
You can use all Blaupunkt and Velocity am-
plifi ers.
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 03, CDC A 08 and IDC A 09.
Detachable control panel
Theft protection
The device is equipped with a detachable
control panel (fl ip-release panel) as a way
of protecting your equipment against theft.
The device is worthless to a thief without
this control panel.
Protect your device against theft by taking
the control panel with you whenever you
leave your vehicle. Do not leave the control
panel inside your vehicle - not even in a hid-
ing place.
The control panel has been designed to be
easy to use.
Notes:
Never drop the control panel.
Never expose the control panel to di-
rect sunlight or other heat sources.
Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, please clean the contacts
with a lint-free cloth moistened with
cleaning alcohol.
Detaching the control panel
1
Press the button 1.
The locking mechanism of the control panel
is unlocked.
Pull the control panel straight out of the
device and to the left.
Scope of delivery Detachable control panel
02MadeiraPortoCD27_gb.indd 3002MadeiraPortoCD27_gb.indd 30 26.10.2006 16:08:39 Uhr26.10.2006 16:08:39 Uhr
31
ENGLISH
The device switches off.
All the current settings are saved.
Any CD already inserted in the device re-
mains there.
Attaching the control panel
Push the control panel into the guides
of the device from the left to the right.
Carefully push on the left side of the
control panel until it clicks into place.
Note:
When attaching the control panel, make
sure you do not push on the display.
If the device was still switched on when you
detached the control panel, it will automati-
cally switch on with the last setting activat-
ed (radio, CD, CD changer or AUX) when
the panel is replaced.
Switching on/off
There are various ways of switching the de-
vice on/off:
Switching on/off using the vehicle
ignition
The device will switch on/off simultaneous-
ly with the ignition if the device is correctly
connected to the vehicle’s ignition and you
did not switch the device off by pressing
button 2.
Switching on/off using button 2
To switch on the device, press button
2.
To switch off the device, press and
hold down button 2 for longer than
two seconds.
The device switches off.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
Switching on with CD draw-in
If the device is switched off and no CD is in
the drive,
gently insert the CD with its printed
side uppermost into the drive 4 until
you feel some resistance.
The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
The device switches on and CD playback
starts.
Detachable control panel Switching on/off
02MadeiraPortoCD27_gb.indd 3102MadeiraPortoCD27_gb.indd 31 26.10.2006 16:08:39 Uhr26.10.2006 16:08:39 Uhr
32
Note:
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch in on fi rst with the button 2 to
start the playback.
Switching the device on/off using the
detachable control panel
Detach the control panel.
The device switches off.
Attach the control panel again.
The device switches on. The last setting
(radio, CD, CD changer or AUX) is reacti-
vated.
Adjusting the volume
You can adjust the volume in increments
from 0 (off) to 66 (maximum).
To increase the volume,
press the + button 3.
To decrease the volume,
press the – button 3.
Setting the power-on volume
Note:
The device features a time-out function
(time window).
For example, if you press the MENU
button : and select a menu item,
the device switches back after ap-
prox. 8 seconds after the last button
activation. The settings performed are
saved.
You can set the power-on volume.
Press the MENU button :.
Press the
or button 6 repeat-
edly until "ON VOLUME" appears on the
display.
Adjust the power-on volume using the
buttons 6.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you enable "LAST VOL", the volume which
was set the last time you switched off the
device is re-enabled.
Switching on/off Adjusting the volume
02MadeiraPortoCD27_gb.indd 3202MadeiraPortoCD27_gb.indd 32 26.10.2006 16:08:39 Uhr26.10.2006 16:08:39 Uhr
33
ENGLISH
Note:
To protect your hearing, the power-on
volume is limited to the value "38". If
the volume before switching off was
higher and the "LAST VOL" setting was
selected, the device switches on again
with the value "38".
When you have fi nished making your chang-
es,
press the MENU button : twice.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a pre-
set level (Mute).
Briefl y press the button 2.
"MUTE" appears on the display.
Cancelling mute
To return to your previously set volume
level,
briefl y press the button 2 again.
Adjusting the mute level
You can adjust the mute level.
Press the MENU button :.
Press the
or button 6 repeat-
edly until "MUTE LVL" appears on the
display.
Adjust the mute level using the
buttons 6.
When you have fi nished making your
changes,
press the MENU button : twice.
Switching the confi rmation beep
on/off
The system will output a confi rmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the MENU button :.
Press the
or button 6 repeatedly
until "BEEP ON" or "BEEP OFF" appears
on the display.
Switch the beep on or off using the
buttons 6.
When you have fi nished making your chang-
es,
press the MENU button :.
Muting during telephone mode
If your device is connected to a cell phone,
the car sound system is muted when
you "pick up" the phone. For this purpose,
the cell phone must be connected to the
device as described in the installation
instructions.
The display shows "PHONE".
Adjusting the volume
02MadeiraPortoCD27_gb.indd 3302MadeiraPortoCD27_gb.indd 33 26.10.2006 16:08:39 Uhr26.10.2006 16:08:39 Uhr
34
Radio mode
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
among Europe (EUROPE), America (USA),
South America (S-AMERICA), and Thailand
(THAI). The tuner is factory-set to the re-
gion in which it was sold. If you experience
problems with your radio reception, please
check this setting.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting EUROPE.
Switch off the device by pressing but-
ton 2.
Hold the buttons 1 and 5 < pressed at
the same time and switch on the device
again with the button 2.
"TUNER" is displayed.
Select your tuner region with the
or
button 6.
To save the setting,
switch the device off and on again or
wait approx. 8 seconds. The radio
starts playing with the last setting se-
lected (radio, CD, CD changer or AUX).
Switching to radio mode
If you are in CD, CD changer or AUX mode,
press the BND/TS ? button
or
press the SRC/
button > repeated-
ly until the memory bank, e.g. "FM1",
appears on the display.
A border appears around the radio symbol.
Convenient RDS functions
This device is equipped with an RDS radio
receiver (Radio Data System). Many of the
receivable FM stations broadcast a signal
that not only carries the programme but
also additional information such as the sta-
tion name and programme type (PTY).
The station name appears on the display as
soon as the tuner receives it.
The convenient RDS functions AF
(Alternative Frequency) and REGIONAL ex-
tend your radio’s range of functions.
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
REGIONAL: At certain times, some ra-
dio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
Note:
REGIONAL must be activated/deacti-
vated separately in the menu.
Switching the RDS function on/off
If you want to use the RDS functions (AF
and REGIONAL),
press and hold down the TRAF = but-
ton for longer than two seconds.
The RDS function is active if the RDS sym-
bol appears on the display.
Radio mode
02MadeiraPortoCD27_gb.indd 3402MadeiraPortoCD27_gb.indd 34 26.10.2006 16:08:39 Uhr26.10.2006 16:08:39 Uhr
35
ENGLISH
Switching REGIONAL on/off
Press the MENU button :.
Press the
or button 6 repeated-
ly until "REG" appears on the display.
"OFF" or "ON" is displayed alongside
"REG".
To switch REGIONAL on/off,
press the
or button 6.
Press the MENU button :.
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Five stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
briefl y press the BND/TS ? button.
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
Press the
or button 6.
The radio tunes into the next receivable sta-
tion.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the RDS function is deactivated.
Press the
or button 6.
Browsing through broadcasting
networks (FM only)
If radio stations provide several pro-
grammes, you have the option of browsing
through these so-called "broadcasting net-
works".
Note:
The RDS function must be activated be-
fore you can use this feature.
Press the
or button 6 to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the MENU button :.
Press the
or button 6 repeatedly
until "SENS" and the currently set value
appears on the display.
Radio mode
02MadeiraPortoCD27_gb.indd 3502MadeiraPortoCD27_gb.indd 35 26.10.2006 16:08:39 Uhr26.10.2006 16:08:39 Uhr
36
"SENS HI6" means that the tuner is set to
the highest sensitivity setting. "SENS LO1"
means it is set to the lowest sensitivity set-
ting.
Set the desired sensitivity level using
the
buttons 6.
When you have fi nished making your chang-
es,
press the MENU button :.
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Press and hold down one of the station
buttons 1 - 5 < for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve sta-
tions offering the strongest reception in the
region (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Press and hold down the BND/TS ?
for longer than two seconds.
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband.
Press the station button 1 - 5 < of the
desired station.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
Starting SCAN
Press and hold down the MENU button
: for longer than two seconds.
Scanning begins. "SCAN" appears briefl y
on the display followed by a fl ashing display
of the current station name or frequency.
Cancelling SCAN and continuing
listening to a station
Press the MENU button :.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the MENU button :.
Press the
or button 6 repeat-
edly until "SCAN TIME" appears on the
display.
Set the desired scanning time using the
buttons 6.
Radio mode
02MadeiraPortoCD27_gb.indd 3602MadeiraPortoCD27_gb.indd 36 26.10.2006 16:08:39 Uhr26.10.2006 16:08:39 Uhr
37
ENGLISH
When you have fi nished making your chang-
es,
press the MENU button : twice.
Note:
The defi ned scanning time is also ap-
plied by the system to scanning carried
out in CD and CD changer mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
For example, the programme types can be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK MUSIC
You can use the PTY function to select sta-
tions of a particular programme type.
PTY-EON
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
Notes:
If the tuner does not fi nd a station
that corresponds to the selected pro-
gramme type, you will hear a beep
and "NO PTY" appears briefl y on the
display. The radio will then retune to
the station that it received last.
If the tuned radio station or another
station on the broadcasting net-
work broadcasts your selected pro-
gramme type at a later point in time,
the radio will automatically switch
from the currently tuned station or
from CD mode or CD-changer mode
to the station whose programme
type matches the one you selected.
If you do not want this PTY EON
switching, disable it in the menu
with "PTY off". First, press one of the
SRC/
> or BND/TS ? buttons.
Switching PTY on/off
Press the MENU button :.
Press the
or button 6 repeatedly
until "PTY ON" or "PTY OFF" appears on
the display.
Press the
or
button 6 to switch
PTY ON or OFF.
Press the MENU button :.
Selecting the PTY language
You can select the language for the display
of the programme types. Options include
"DEUTSCH", "ENGLISH" and "FRANÇAIS".
Press the MENU button :.
Press the
or button 6 repeat-
edly until "PTY LANG" appears on the
display.
Set the desired language using the
buttons 6.
When you have fi nished making your chang-
es,
press the MENU button : twice.
Radio mode
02MadeiraPortoCD27_gb.indd 3702MadeiraPortoCD27_gb.indd 37 26.10.2006 16:08:40 Uhr26.10.2006 16:08:40 Uhr
38
Selecting a programme type and
starting seek tuning
Press the or button 6.
The current programme type appears on
the display.
If you want to select another pro-
gramme type, you can do so by press-
ing the
or button 6 whilst this
display is visible.
The selected programme type appears
briefl y on the display.
Press the
or button 6 to start
seek tuning.
The radio will then tune into the next station
that it fi nds that corresponds to your select-
ed programme type.
Optimising radio reception
HICUT
The HICUT function improves reception
during poor radio reception (only FM). If
reception interferences are present, the in-
terference level is automatically reduced.
Switching HICUT on/off
Press the MENU button :.
Press the
or button 6 repeatedly
until "HICUT" appears on the display.
Press the
or button 6 to adjust
the HICUT setting.
"HICUT 0" means no automatic reduction of
the interference level, "HICUT 1" means au-
tomatic reduction of the interference level.
Press the MENU button :.
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON stands for Enhanced Other
Network.
Whenever a traffi c announcement (TA) is
broadcast, the system switches automati-
cally from a station that does not provide
traffi c reports to the appropriate traffi c in-
formation station within the broadcasting
network that does.
Once the traffi c report has been played, the
system will switch back to the programme
that you were listening to before.
Switching traffi c information
priority on/off
Briefl y press the TRAF button =.
The priority for traffi c announcements is ac-
tivated if the display shows the traffi c jam
symbol.
Notes:
You will hear a warning beep:
If you leave the reception area of a
traffi c information station that you
are currently listening to.
If you are receiving a traffi c informa-
tion station and the volume is set
to minimum (0) or if you leave the
broadcast area of the set traffi c in-
formation station while listening to
a CD, a CD changer or AUX and the
subsequent automatic seek tuning
does not fi nd a new traffi c informa-
tion station.
If you retune the radio from a traffi c
information station to a station that
does not broadcast traffi c informa-
tion.
Radio mode Traffi c information
02MadeiraPortoCD27_gb.indd 3802MadeiraPortoCD27_gb.indd 38 26.10.2006 16:08:40 Uhr26.10.2006 16:08:40 Uhr
39
ENGLISH
If you hear the warning beep, you can ei-
ther switch off traffi c information priority
or tune into a station that broadcasts traffi c
information.
Setting the volume for traffi c
announcements
Press the MENU button :.
Press the
or button 6 repeat-
edly until "TA VOLUME" appears on the
display.
Adjust the volume using the
but-
tons 6.
When you have fi nished making your chang-
es,
press the MENU button : twice.
Notes:
Using the volume control 3, you
can also adjust the volume during a
traffi c announcement for the dura-
tion of that announcement.
The volume distribution can be ad-
justed for traffi c announcements.
For further information, please read
the "Sound" chapter.
CD mode
You can use this device to play standard
audio CDs, CD-Rs and CD-RWs with a dia-
meter of 12 or 8 cm.
Caution!
Labelled or shaped CDs can dam-
age the CD drive.
Do not insert any shape CDs.
Do not attach labels to CDs since the la-
bel may detach during operation.
Note:
Label CDs only by using a marker since
it does not contain any caustic materi-
als. Permanent markers can damage
CDs.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Switching to CD mode
If there is no CD inserted in the drive,
gently insert the CD with its printed
side up into the CD tray 4 until you
feel some resistance.
The drive draws in the CD automatically.
You must not assist or hinder the drive as it
draws in the CD.
The CD starts playing.
The display shows the CD symbol.
Traffi c information CD mode
02MadeiraPortoCD27_gb.indd 3902MadeiraPortoCD27_gb.indd 39 26.10.2006 16:08:40 Uhr26.10.2006 16:08:40 Uhr
40
Notes:
The CD symbol indicates that a CD is
located in the drive.
A border surrounding the CD symbol
indicates that CD is selected as au-
dio source.
If the vehicle ignition was switched
off prior to inserting the CD, you
must switch in on fi rst with the but-
ton 2 to start the playback.
If a CD is already inserted in the drive,
press the SRC/
button > repeated-
ly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.
Selecting tracks
Press one of the arrow buttons 6 to
select the next or previous track.
If you press the
or button 6 once, the
player will play the current track again from
the beginning.
Fast track selection
To quickly select tracks backwards or for-
wards,
press and hold down one of the
buttons 6 until fast-reverse / fast-for-
ward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down one of the
buttons 6 until fast searching back-
wards / forwards begins.
Random track play (MIX)
Press the 5 MIX button <.
"MIX CD" appears briefl y on the display
and the MIX symbol lights up. The next ran-
domly selected track will then be played.
Cancelling MIX
Press the 5 MIX button < again.
"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the CD.
Press and hold down the MENU button
: for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Cancelling SCAN and continuing
listening to a track
To stop scanning, press the MENU but-
ton :.
The currently scanned track will then con-
tinue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button <.
"RPT TRCK" appears briefl y on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.
CD mode
02MadeiraPortoCD27_gb.indd 4002MadeiraPortoCD27_gb.indd 40 26.10.2006 16:08:40 Uhr26.10.2006 16:08:40 Uhr
41
ENGLISH
Cancelling REPEAT
If you want to cancel the repeat function,
press the 4 RPT button : again.
"RPT OFF" appears briefl y on the display
and the RPT symbol disappears. Normal
playback is then resumed.
Interrupting playback (PAUSE)
Press the button 3 <.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button 3
<.
Playback is continued.
Confi guring the display
You can select from two display types for
CD mode:
Track number and time
Track number and playing time
To change the display,
Press and hold down the DIS button
9 for longer than 2 seconds.
Displaying CD text
Some CDs include CD text. The CD text
might contain the names of the artist, al-
bum and tracks.
You can allow the CD text to be displayed
as scrolling text every time you switch to
another track. The default display will ap-
pear again after the whole CD text has been
shown once. For further information, please
read the section entitled "Confi guring the
display".
Switching CD text on/off
Press the MENU button :.
Press the
or button 6 repeatedly
until "CD TEXT" appears on the display.
Switch the CD text function on ("TEXT
ON") or off ("TEXT OFF") using the
or
button 6.
When you have fi nished making your chang-
es,
press the MENU button : twice.
Traffi c announcements in CD
mode
If you wish to receive traffi c announcements
in CD mode,
press the TRAF button =.
The priority for traffi c announcements is
activated if the display shows the traffi c
jam symbol. For further information, please
read the chapter "Traffi c information recep-
tion".
Ejecting a CD
Press the button 7 next to the
CD compartment.
The CD is ejected.
Remove the CD.
Notes:
If a CD is ejected, the drive will auto-
matically draw it back in again after
approx. 10 seconds.
You can also eject CDs whilst the
device is switched off or whilst an-
other audio source is activated.
CD mode
02MadeiraPortoCD27_gb.indd 4102MadeiraPortoCD27_gb.indd 41 26.10.2006 16:08:40 Uhr26.10.2006 16:08:40 Uhr
42
CD-changer mode
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
Switching to CD-changer mode
Press the SRC/ button > repeat-
edly until "CHANGER" appears on the
display.
A border appears around the CD changer
symbol.
The device starts playing the fi rst CD that
the CD changer detects.
Selecting CDs
To move up or down to another CD,
press the
or button 6 once or
several times.
Note:
The device will ignore empty CD slots
in the changer and slots containing
invalid CDs.
Selecting tracks
To move up or down to another track on
the current CD,
press the
or button 6 once or
several times.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down one of the
buttons 6 until fast searching back-
wards / forwards begins.
Confi guring the display
Five options are available for the display in
CD changer mode:
Track number and playing time ("TRCK-
TIME")
Track number and time ("TRCK-CLK")
CD number and track number ("CD-
TRCK")
CD number and time ("CD-CLK")
CD number and playing time ("CD-
TIME")
Press and hold down the DIS button
9 for longer than 2 seconds.
For an additional selection, press and
hold down the DIS button 9 for longer
than 2 seconds.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
briefl y press the 4 RPT button <.
"RPT TRCK" appears briefl y and RPT lights
up on the display.
To repeat the current CD,
press and hold down the 4 RPT button
< for longer than two seconds.
"RPT DISC" appears briefl y and RPT lights
up on the display.
Cancelling REPEAT
To stop the current track or current CD from
being repeated,
briefl y press the 4 RPT button <.
"RPT OFF" appears and RPT disappears on
the display.
CD-changer mode
02MadeiraPortoCD27_gb.indd 4202MadeiraPortoCD27_gb.indd 42 26.10.2006 16:08:40 Uhr26.10.2006 16:08:40 Uhr
43
ENGLISH
Random track play (MIX)
To play the tracks on the current CD in
random order,
briefl y press the 5 MIX button <.
"MIX CD" appears briefl y and MIX lights up
on the display.
To play the tracks on all inserted CDs in
random order,
press and hold down the 5 MIX button
< for longer than two seconds.
"MIX ALL" appears briefl y and MIX lights up
on the display.
Cancelling MIX
Briefl y press the 5 MIX button <.
"MIX OFF" appears and MIX on the display
disappears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefl y play) all the tracks on all the
inserted CDs in ascending order,
press and hold down the MENU button
: for longer than two seconds.
"TRK SCAN" appears on the display and the
number of the current track fl ashes.
Stopping SCAN
To stop scanning,
briefl y press the MENU button :.
The currently scanned track will then con-
tinue to be played normally.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Interrupting playback (PAUSE)
Press the button 3 <.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button
3
<.
Playback is continued.
CD-changer mode
02MadeiraPortoCD27_gb.indd 4302MadeiraPortoCD27_gb.indd 43 26.10.2006 16:08:41 Uhr26.10.2006 16:08:41 Uhr
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

Blaupunkt porto cd27 User manual

Category
Car media receivers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI