Revo REXT600-2 Specification

Category
Security cameras
Type
Specification
Power source
Power consumption
Image sensor
Total pixels
Scanning system
Scanning frequency
Sync. system
Electronic shutter
Resolution
Min. illumination
Video output
2:1 interlace
NTSC : 15.734KHz(H) x 59.94Hz(V) / PAL : 15.625KHz(H) x 50Hz(V)
NTSC : 1/60 ~ 1/100,000 sec. / PAL : 1/50 ~ 1/100,000 sec.
540 TV Lines
Color ( 0.25 Lux) / BW(0.01Lux)
@ F1.2, 50 IRE
1.0 Vp-p (75ohm, composite)
More than 50dB (AGC OFF)
ON / OFF
ON / OFF
Auto / Color Fix
DC / VIDEO
ATW Fixed
NTSC : 811(H) x 508(V) / PAL : 795(H) x 596(V)
MODEL
S/N ratio
BLC
AGC
Day/Night
Auto iris lens
White Balance
F
U
N
C
T
I
O
N
SPECIFICATIONS
General
Power
Power input
Lens mount
1/4''-20 UNC (top or bottom)
2-Pin Terminal block
4-Pin mini din jack (standard connection)
C/CS mount (Selected through back focus)
Mounting hole
Connector
&
etc.
Video output
Auto iris output
Operating temperature
Operating humidity
BNC connector
0 ~ 96% (non-condensing)
DC 12V / AC 24V 10%
5.2 Watts
Internal
Dip switch
Camera Control
ON / OFF
ON / OFF
E/I
Flickerless
+50
True D&N
(NTSC) (PAL)
Digital D/N
(NTSC) (PAL)
4.0 Watts
Color ( 0.25 Lux)
@ F1.2, 50 IRE
Blower
Heater
Power Supply
Power Consumption
Blower ON
Blower OFF
Power Supply
Power Consumption
Heater ON
Heater OFF
24 Vac
3.4W
t C > 35 C +/-3 C
T F > 95 F +/-5 F
t C < 20 C +/-3 C
24 Vac
20W
t C < 5 C +/- 3 C
T F < 41 F +/- 5 F
t C > 15 C +/- 3 C
- 8 -
  • Page 1 1

Revo REXT600-2 Specification

Category
Security cameras
Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI