Edimax BR-6225N User manual

1

2

English

this publication may be reproduced, transmitted, transcribed, stored in a

retrieval system, or translated into any language or computer language, in any

form or by any means, electronic, mechanical, magnetic, optical, chemical,

manual or otherwise, without the prior written permission of this Company .

This company makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties, merchantability or fitness for any particular purpose. Any

software described in this manual is sold or licensed "as is". Should the

programs prove defective following their purchase, the buyer (and not this

company, its distributor, or its dealer) assumes the entire cost of all necessary

servicing, repair, and any incidental or consequential damages resulting from

any defect in the software. Further, this company reserves the right to revise

this publication and to make changes from time to time in the contents hereof

without obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly

different from those shown in this QIG. For more detailed information about this

product, please refer to the User Manual on the CD-ROM. The software and

specifications are subject to change without notice. Please visit our web site

product names mentioned in this manual are trademarks and/or registered

trademarks of their respective holders .

Notice according to GNU/GPL-Version 2

This product includes software that is subject to the GNU/GPL-Version 2.

You find the text of the license on the product cd/dvd. The program is free

software and distributed without any warranty of the author. We offer, valid

for at least three years, to give you, for a charge no more than the costs of

physically performing source distribution, a complete machine-readable

copy of the corresponding source code.

Please contact Edimax at: Edimax Technology co., Ltd, NO. 3, Wu-Chuan

3rd RD Wu-Ku-Industrial Park, Taipei Hsien, Taiwan. R.O.C., TEL :

+886-2-77396888, FAX : +886-2-77396887, [email protected]

3

C A T A L O G

Chapter I: Product Information ....................................................................................... 6

1-1 Introduction and safety information .......................................................................... 6

1-2 Safety Information ..................................................................................................... 8

1-3 System Requirements ................................................................................................. 9

1-4 Package Contents .................................................................................................... 10

1-5 Familiar with your new wireless broadband router ................................................ 11

Chapter II: System and Network Setup ........................................................................... 13

2-1 Establish network connection .................................................................................. 13

2-2 Setup client computers to obtain IP address automatically .................................... 15

2-2-1 Windows 95/98/Me IP address setup: ................................................ 16

2-2-2 Windows 2000 IP address setup: ........................................................ 18

2-2-3 Windows XP IP address setup: ........................................................... 20

2-2-4 Windows Vista IP address setup: ........................................................ 22

2-3 Connect to broadband router by web browser ........................................................ 24

2-4 Using ‘Quick Setup’................................................................................................. 28

2-4-1 Using ‘Dynamic IP’ as broadband connection type ........................... 32

2-4-2 Using ‘Fixed-IP xDSL’ as broadband connection type ...................... 34

2-4-3 Using ‘PPPoE xDSL’ as broadband connection type ......................... 36

2-4-4 Using ‘PPTP xDSL’ as broadband connection type ........................... 38

2-4-5 Using 'L2TP xDSL' as broadband connection type ............................ 41

2-4-6 Using 'Telstra Big Pond' as broadband connection type .................... 44

2-4-7 WISP (Wireless ISP Connection mode) ............................................. 46

Chapter III: General Setup ........................................................................................... 48

3-1 System ...................................................................................................................... 50

3-1-1 Time Zone .......................................................................................... 50

3-1-2 Password Settings ............................................................................... 52

3-1-3 Remote Management .......................................................................... 53

3-2 WAN ......................................................................................................................... 55

3-2-1 Dynamic IP ......................................................................................... 58

3-2-2 Static IP .............................................................................................. 60

3-2-3 PPPoE ................................................................................................. 62

3-2-4 PPTP ................................................................................................... 65

3-2-5 L2TP ................................................................................................... 65

3-2-6 Telstra Big Pond ................................................................................. 68

3-2-7 WISP ( Wireless ISP Connection Mode ) ........................................... 70

3-3 LAN (Wired) ............................................................................................................. 72

3-3-1 Start .................................................................................................... 72

3-3-2 LAN IP ............................................................................................... 73

4

3-3-2 LAN IP ............................................................................................... 74

3-3-3 DHCP Server ...................................................................................... 75

3-3-4 Static DHCP Leases ........................................................................... 76

3-4 Wireless .................................................................................................................... 78

3-4-1 Basic Settings ..................................................................................... 79

3-4-1-1 AP mode .................................................................................. 80

3-4-1-2 Station-Infrastructure .............................................................. 84

3-4-1-3 AP Bridge-Point to Point ......................................................... 87

3-4-1-4 AP Bridge-Point to Multi-Point .............................................. 90

3-4-1-5 AP Bridge-WDS ...................................................................... 92

3-4-1-6 Universal Repeater .................................................................. 95

3-4-2 Security Settings ............................................................................... 102

3-4-4 WPS .................................................................................................. 109

3-4-5 Wireless Schedule ............................................................................ 111

3-5 Advance Settings* .................................................................................................. 112

3-5-1 QoS ................................................................................................... 113

3-5-1-1 Basic QoS Settings ................................................................ 113

3-5-1-2 Add a new QoS entry ............................................................ 115

3-5-2 NAT .................................................................................................. 117

3-5-2-1 Virtual Server ........................................................................ 118

3-5-2-2 Special Applications .............................................................. 120

3-5-2-3 UPnP Settings ....................................................................... 123

3-5-2-4 ALG Settings ......................................................................... 124

3-5-2-5 Static Routing ........................................................................ 125

3-5-3 Firewall............................................................................................. 127

3-5-3-1 Access Control ...................................................................... 127

3-5-3-2 URL Blocking ....................................................................... 132

3-5-3-3 DoS ....................................................................................... 134

3-5-4 DDNS ............................................................................................... 137

3-5-5 Port Forwarding................................................................................ 140

3-5-6 DMZ ................................................................................................. 143

Chapter IV EZ View ................................................................................................. 146

Chapter V: Status ...................................................................................................... 154

5-1 Internet Connection ............................................................................. 156

5-2 Device Status ....................................................................................... 157

5-3 System Log .......................................................................................... 158

5-4 Security Log ........................................................................................ 159

5-5 Active DHCP Client ............................................................................ 160

5-6 Statistics ............................................................................................................. 161

Chapter VI : Tools ........................................................................................................ 162

5

6-1 Configuration Tools ........................................................................................... 164

6-2 Firmware Upgrade ............................................................................................. 165

6-3 Restart ................................................................................................................ 166

Chapter VII : Language ............................................................................................... 167

6

Chapter I: Product Information

1-1 Introduction and safety information

Thank you for purchasing Edimax BR-6225n / BR-6226n nLite wireless

broadband router! This high cost-efficiency router is the best choice for

Small office / Home office users, all computers and network devices can

share a single xDSL / cable modem internet connection at high speed.

Easy install procedures allows any computer users to setup a network

environment in very short time - within minutes, even inexperienced.

When the number of your computers and network-enabled devices grow,

you can also expand the number of network slot by simple attach a hub or

switch, to extend the scope of your network!

With built-in IEEE 802.11b/g wireless network capability, all computers

and wireless-enabled network devices (including PDA, cellular phone,

game console, and more!) can connect to this broadband router without

additional cabling. New Draft-N wireless capability also gives you the

highest speed of wireless experience ever! With a compatible wireless

card installed in your PC, you can transfer file for up to 150 Mbps! The

radio coverage is also doubled, so don’t worry if your office or house is

really big!

Other features of this router including:

• Provide 12-languages user interface

• Support WISP (Wireless ISP) connection mode

• Support EZview to manage LAN devices

• Support wireless schedule setting

• Built-in 16-languages EZmax Setup Wizard to setup router

• High Internet Access throughput

• Allow multiple users to share a single Internet connection

• Supports up to 253 LAN users sharing a single Cable or xDSL internet

connection

• Four wired LAN ports (10/100Mbps) and one WAN port (10/100Mbps)

• Comply with wireless IEEE 802.11b/g standards

7

• Compatible with wireless IEEE802.11n standard

• Support DHCP (Server/Client) for easy client IP-address setup

• Advanced network and security features like: Special Applications, DMZ,

Virtual Servers, URL blocking, QoS, Access Control, Firewall.

• Allow you to monitor the router’s status like: DHCP Client Log, System

Log, Security Log and Device/Connection Status

• Easy to use Web-based GUI for network configuration and

management purposes

• Remote management function allows configuration and upgrades from

a remote computer (over the Internet)

•

Auto MDI / MDI-X function for all wired Ethernet ports.

8

1-2 Safety Information

In order to keep the safety of users and your properties, please follow the

following safety instructions:

1. This router is designed for indoor use only; DO NOT place this router

outdoor.

2. DO NOT put this router at or near hot or humid places, like kitchen or

bathroom. Also, do not left this router in the car in summer.

3. DO NOT pull any connected cable with force; disconnect it from the

router first.

4. If you want to place this router at high places or hang on the wall,

please make sure the router is firmly secured. Falling from high places

would damage the router and its accessories, and warranty will be void.

5. Accessories of this router, like antenna and power supply, are danger to

small children under 3 years old. They may put the small parts in their

nose or month and it could cause serious damage to them. KEEP THIS

ROUTER OUT THE REACH OF CHILDREN!

6. The router will become hot when being used for long time (This is

normal and is not a malfunction), DO NOT put this router on paper,

cloth, or other flammable materials.

7. There’s no user-serviceable part inside the router. If you found that the

router is not working properly, please contact your dealer of purchase and

ask for help. DO NOT disassemble the router, warranty will be void.

8. If the router falls into water when it’s powered, DO NOT use your

hand to pick it up. Switch the electrical power off before you do anything,

or contact an experienced technician for help.

9. If you smell something strange, or even see some smoke coming out

from the router or power supply, remove the power supply or switch the

electrical power off immediately, and call dealer of purchase for help.

9

1-3 System Requirements

z Internet connection, provided by xDSL or cable modem with a RJ-45

Ethernet port.

z Computer or network devices with wired or wireless network interface

card.

z Web browser (Microsoft Internet Explorer 4.0 or above, Netscape

Navigator 4.7 or above, Opera web browser, or Safari web browser).

z An available power socket

10

1-4 Package Contents

Before you starting to use this router, please check if there’s anything

missing in the package, and contact your dealer of purchase to claim for

missing items:

□ Router ………………………………………………………… 1

□ Quick installation guide (1 pcs) ………………………………… 2

□ CDROM (with multi-languages setup wizard, multi-languages Quick

installation guide and User manual )(1 pcs) …………………….. 3

□ 12V 1A power adapter (1 pcs)…………………………………..... 4

□ Ethernet Cable (1 pcs)………………………………………..... 5

□ Holding base (1 pcs)…………………………………………..... 6

□ Antenna (1 pcs for BR-6225n only)…………………………….....7

□ Accessories (1 pcs) ……………………………………………..... 8

You can configure the router by running the Setup Wizard in the

CD-ROM provided in the package. The wizard provides quick setup

for the Internet connection, SSID, wireless security, firmware

upgrade and changing router’s password. When you start the

Setup Wizard, you will get the following Welcome screen. Please

choose the language to start with and follow the easy steps in the

Wizard. No instruction for the Setup Wizard is given here.

If you lost the CD-ROM or you prefer the traditional web setup,

please follow the procedures in this Manual ( or Quick Installation

Guide ) to configure the router

11

1-5 Familiar with your new wireless broadband router

Front Panel

LED Name Light Status Description

PWR ON Router is switched on and correctly powered

WLAN

On Wireless network is switched on

Off Wireless network is switched off

Flashing Wireless LAN activity (transferring data) or

WPS mode is on. (LED will on and off every

1 second)

WAN

LNK/ACT

On WAN port is connected

Off WAN port is not connected

Flashing WAN activity (transferring data)

LAN

LNK/ACT

On LAN port is connected

Off LAN port is not connected

Flashing LAN activity (transferring data)

12

Back Panel

BR-6226n

BR-6225n

Item Name Description

Antenna High gain 3dBi Antenna

ON/OFF

Enable / Disable wireless signal

You can not connect the router via wireless adapter,

when you disable (OFF) the wireless signal.

12V (Power) Power connector, connects to power adapter

Reset / WPS Reset the router to factory default settings (clear all

settings) or start WPS function. Press this button and

hold for 20 seconds to clear all settings, and press this

button 3~5 seconds to start WPS function.

1 - 4 Local Area Network (LAN) ports 1 to 4

WAN Wide Area Network (WAN / Internet) port

13

Chapter II: System and Network Setup

2-1 Establish network connection

Please follow the following instruction to build the network connection

between your new Broadband router and your computers, network

devices:

1. Connect your xDSL / cable modem to the WAN port of router by

Ethernet cable.

2. Connect all your computers, network devices (network-enabled

consumer devices other than computers, like game console, or switch /

hub) to the LAN port of the router.

14

3. Connect the power adapter to the wall socket, and then connect it to

the ‘Power’ socket of the router.

4. Please check all LEDs on the front panel. ‘PWR’ LED should be

steadily on, WAN and LAN LEDs should be on if the computer /

network device connected to the respective port of the router is

powered on and correctly connected. If PWD LED is not on, or any

LED you expected is not on, please recheck the cabling.

15

2-2 Setup client computers to obtain IP address automatically

After the network connection is established, the next step you should

do is setup the router with proper network parameters, so it can work

properly in your network environment.

Before you can connect to the router and start configuration

procedures, your computer must be able to get an IP address

automatically (use dynamic IP address). If it’s set to use static IP address,

or you’re unsure, please follow the following instructions to configure

your computer to use dynamic IP address:

If the operating system of your computer is….

Windows 95/98/Me - please go to section 2-2-1

Windows 2000 - please go to section 2-2-2

Windows XP - please go to section 2-2-3

Windows NT - please go to section 2-2-4

16

2-2-1 Windows 95/98/Me IP address setup:

1. Click ‘Start’ button (it should be located at lower-left corner of your

computer), then click control panel. Double-click Network icon, and

Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.

17

2. Select ‘Obtain an IP address from a DHCP server’, then click ‘OK’.

18

2-2-2 Windows 2000 IP address setup:

1. Click ‘Start’ button (it should be located at lower-left corner of your

computer), then click control panel. Double-click Network and Dial-up

Connections icon, double click Local Area Connection, and Local Area

Connection Properties window will appear. Select ‘Internet Protocol

(TCP/IP)’, then click ‘Properties’

19

2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server

address automatically’, then click ‘OK’.

20

2-2-3 Windows XP IP address setup:

1. Click ‘Start’ button (it should be located at lower-left corner of your

computer), then click control panel. Double-click Network and Internet

Connections icon, click Network Connections, then double-click Local

Area Connection, Local Area Connection Status window will appear,

and then click ‘Properties’

Page is loading ...

Edimax BR-6225N, BR-6226N, BR-6424n User manual

Related papers

Other documents