Guardian Dual SRL Bracket Operating instructions

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

85278 (Rev. B)

Dual SRL Bracket

* Patent Pending

Part #: 11058

Attachment:

2. Install compatible SRLs directly

to bracket loop as shown. Do not

install with carabiners. Maximum

2 SRLs per Dual SRL Bracket.

3. At webbing under harness

dorsal D-ring, insert locking pin

beneath webbing as shown.

Never connect Dual SRL Bracket

to harness D-ring.

4. Fully close and lock Dual SRL

Bracket. Ensure green indicator

is fully visible when locked.

ONLY for use with the following

Guardian Fall Protection SRLs:

Diablo Web SRL

Diablo LE Cable SRL

10’ Cable Velocity SRL

11’ Halo Web SRL

NEVER for use with any other fall

protection device, unless explicitly

permitted by Guardian.

1. Open Dual SRL Bracket by simultaneously pressing release buttons at end of pin and at bracket loop.

Release

buttons

Install close-up

SRLs connected

to bracket loop

Locking pin inserted

through harness webbing

under dorsal D-ring

Green indicator

fully visible