Samsung LN52B550K1F User manual

English-1

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

To register this product please visit

www.samsung.com/register

LN32B550/LN37B550/LN40B550/

LN46B550/ LN52B550

Quick Setup Guide

STOP

Please do not return

this unit

If you are having problems operating

this TV,

Please call;

1-800-SAMSUNG (1-800-726-7864)

For web support please visit

www.samsung.com/support

Rear Panel

1

!

0

8

9

1

6

7

2 3 4 5

1 HDMI IN 1 (DVI), 2, 3, 4 /

DVI AUDIO IN [R-AUDIO-L]

2 PC IN [PC] / [AUDIO]

3 DIGITAL AUDIO OUT (OPTICAL)

4 EX-LINK

5 AUDIO OUT [R-AUDIO-L]

6 USB

7 AV IN 2

8 ANT IN

9 COMPONENT IN 1, 2 / AV IN 1

0 KENSINGTON LOCK

! POWER INPUT

Audio Output Performance Comparison

OPTICAL (Digital)

AUDIO (Analog)

Best

Normal

Video Input Performance Comparison

HDMI/DVI

PC/COMPONENT

VIDEO

Best

Better

Normal

/

BN68-01884F-00Eng.indd 1 2009-02-26 �� 4:43:03

English-2

Remote Control

See “Remote Control” in the owner’s instructions for details.

1

POWER

Turns the TV on and off.

2

TV

Selects the TV mode directly.

3

NUMERIC BUTTONS

Press to change the channel.

4

_

Press to select additional

channels (digital and analog)

being broadcast by the same

station. For example, to select

channel '54-3', press '54', then

press '_' and '3'.

5

MUTE M

Press to temporarily cut off the

sound.

6

y

Press to increase or decrease

the volume.

7

CH LIST

Used to display Channel Lists

on the screen.

8

TOOLS

Use to quickly select frequently

used functions.

9

INFO

Press to display information on

the TV screen.

0

COLOR BUTTONS

Use these buttons in the

Channel list menus etc.

!

MEDIA.P

Allows you to play music files,

pictures, and movies.

@

P.MODE

Press to select the picture mode.

#

Use these buttons in the DMA

and Anynet+ modes. (

∏

:

This remote can be used to

control recording on Samsung

recorders with the Anynet+

feature)

$

ON/OFF

@

Pressing the ON/OFF @ light

button toggles between on and

off. When the remote control is

on, and a button is pressed on

the remote control, the remote

control buttons will be lit for a

moment. (Using the remote con-

trol with the ON/OFF @ light

button set to On will reduce the

battery usage time.)

%

PRE.CH

Enables you to return to the

previous channel you were

watching.

^

z

Press to change channels.

&

SOURCE

Press to display and select the

available video sources.

*

FAV.CH

Press to switch to your favorite

channels.

(

MENU

Displays the main on-screen

menu.

)

RETURN

Returns to the previous menu.

a

 UP▲/DOWN▼/LEFT◄/

RIGHT►/

ENTER

E

Use to select on-screen menu

items and change menu values.

b

EXIT

Press to exit the menu.

c

P.SIZE

Picture size selection.

d

SRS

Selects SRS TruSurround HD

mode.

e

CC

Controls the caption decoder.

f

MTS

Press to choose stereo, mono or

Separate Audio Program (SAP

broadcast).

1

$

%

^

&

*

(

)

a

b

c

d

e

f

2

3

4

5

6

7

8

9

0

!

@

#

BN68-01884F-00Eng.indd 2 2009-02-26 �� 4:43:03

English-3

Installing the Stand (LN32B550)

1

2

1

2

1

2

Place the Guide Stand and Cover Neck onto the stand and fasten it using the three screws.

1

Attach your LCD TV to the stand.

Two or more people should carry the TV.

Make sure to distinguish between the front and back of the stand when attaching it.

➣

2

Fasten two screws at position

1

and then fasten two screws at position

2

.

3

Installing the Stand (LN37B550, LN40B550, LN46B550, LN52B550)

1

2

1

2

Attach your LCD TV to the stand.

Two or more people should carry the TV.

Make sure to distinguish between the front and back of the stand when attaching it.

➣

1

Fasten two screws at position

1

and then fasten two screws at position

2

.

2

Front

Back

BN68-01884F-00Eng.indd 3 2009-02-26 �� 4:43:04

English-4

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver

(Set-Top Box) via DVI

TV Rear Panel

1

DVI to HDMI Cable (Not supplied)

2

Audio Cable (Not supplied)

1

Connect a DVI to HDMI Cable or DVI-

HDMI Adapter between the HDMI IN 1

(DVI) jack on the TV and the DVI jack on

the DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box).

2

Connect Audio Cables between the DVI

AUDIO IN [R-AUDIO-L] jack on the TV

and the DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box).

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver

(Set-Top Box) via HDMI

1

What is HDMI?

•

HDMI(High-Definition Multimedia

Interface), is an interface that enables the

transmission of digital audio and video

signals using a single cable.

•

The difference between HDMI and DVI

is that the HDMI device is smaller in

size and has the HDCP (High Bandwidth

Digital Copy Protection) coding feature

installed.

Connect an HDMI Cable between

the HDMI IN 1 (DVI), 2, 3 or 4

jack on the TV and the HDMI

jack on the DVD / Blu-ray Player

or Cable Box / Satellite receiver

(Set-Top Box).

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

Each DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box) has a

different back panel configuration.

When connecting a DVD / Blu-ray

player / Cable Box / Satellite receiver

(Set-Top Box), match the color of the

connection terminal to the cable.

When using an HDMI / DVI cable

connection, you must use the HDMI IN

1 (DVI) jack.

➣

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box / Satellite

receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there

is no sound, connect the HDMI cable to the HDMI IN 1 (DVI) jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks

on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver

(Set-Top Box) to confirm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

➣

DVD / Blu-ray player / Cable Box/

Satellite receiver (Set-Top Box)

TV Rear Panel

TV Side Panel

or

HDMI Cable (Not supplied)

1

or

Connections

BN68-01884F-00Eng.indd 4 2009-02-26 �� 4:43:06

English-5

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver

(Set-Top Box) via Component cables

TV Rear Panel

1

Component Cable

(Not supplied)

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

2

Audio Cable (Not supplied)

1

Connect a Component Cable

between the COMPONENT IN (1 or

2) [Y, PB, PR] jacks on the TV and the

COMPONENT [Y, PB, PR] jacks on

the DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box).

2

Connect Audio Cables between the

COMPONENT IN(1 or 2) [R-AUDIO-L]

jacks on the TV and the AUDIO OUT

jacks on the DVD / Blu-ray player / Cable

Box / Satellite receiver (Set-Top Box).

Component video separates the video

into Y (Luminance (brightness)), Pb (Blue)

and Pr (Red) for enhanced video quality.

Be sure to match the component video

and audio connections. For example, if

connecting a Component video cable to

COMPONENT IN 1, connect the audio

cable to COMPONENT IN 1 also.

Each DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box) has a

different back panel configuration.

When connecting a DVD / Blu-ray player /

Cable Box / Satellite receiver (Set-Top

Box), match the color of the connection

terminal to the cable.

➣

Connecting a VCR

1

2

If you have a ‘mono’ (non-stereo)

VCR, use a Y-connector (not

supplied) to connect to the right

and left audio input jacks of the

TV. Alternatively, connect the

cable to the ‘R’ jack. If your VCR

is stereo, you must connect two

cables.

Each VCR has a different back

panel configuration.

➣

When connecting a VCR, match the color of the connection terminal to the cable.

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable

(Yellow).

➣

TV Rear Panel

2

Audio Cable

(Not supplied)

VCR Rear Panel

1

Video Cable

(Not supplied)

Connect Audio Cables between

the AV IN (1 or 2) jacks on the

TV and the AUDIO OUT jacks on

the VCR.

Connect a Video Cable

between the AV IN 1 [Y/VIDEO]

or AV IN 2 [VIDEO] jack on the

TV and the VIDEO OUT jack

on the VCR.

TV Side Panel

BN68-01884F-00Eng.indd 5 2009-02-26 �� 4:43:07

English-6

Connecting a Digital Audio System

TV Rear Panel

1

Optical Cable

(Not supplied)

Digital Audio System

1

Connect an Optical Cable

between the DIGITAL AUDIO

OUT (OPTICAL) jacks on the

TV and the Digital Audio Input

jacks on the Digital Audio

System.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and

adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

Each Digital Audio System has a different back panel configuration.

When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying

a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component

such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2

channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the digital audio out

jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theater, not the TV.

➣

Connecting an Amplifier / DVD Home Theater

TV Rear Panel

1

Audio Cable (Not supplied)

Amplifier/DVD Home Theater

1

Connect Audio Cables between the

AUDIO OUT [R-AUDIO-L] jacks on

the TV and Audio Input jacks on the

Amplifier / DVD Home Theater.

When an audio amplifier is connected

to the AUDIO OUT [R-AUDIO-L]

jacks: Decrease the volume of the TV

and adjust the volume level with the

Amplifier’s volume control.

Each Amplifier/DVD Home Theater has

a different back panel configuration.

When connecting an Amplifier/DVD

Home Theater, match the color of the

connection terminal to the cable.

➣

BN68-01884F-00Eng.indd 6 2009-02-26 �� 4:43:08

English-7

Using a Video Cable

Connecting a Camcorder

1

Connect a Video Cable between

the AV IN 2 [VIDEO] jack on the TV

and the VIDEO OUT jack on the

camcorder.

Camcorder

TV Side Panel

Using an HDMI Cable

1

Connect an HDMI Cable between the

HDMI 4 jack on the TV and the HDMI

OUT jack on the camcorder.

HD Camcorder

TV Side Panel

1

HDMI Cable (Not supplied)

2

Audio Cable (Not supplied)

1

Video Cable (Not supplied

2

Connect Audio Cables between the

AV IN 2 [R-AUDIO-L] jacks on the

TV and the AUDIO OUT jacks on the

camcorder.

Each Camcorder has a different back panel configuration.

When connecting a Camcorder, match the color of the connection terminal to the cable.

➣

BN68-01884F-00Eng.indd 7 2009-02-26 �� 4:43:08

English-8

Connecting a PC

TV Rear Panel

1

D-Sub Cable

(Not supplied)

PC

2

PC Audio Cable

(Not supplied)

1

Connect a D-Sub Cable between

PC IN [PC] connector on the TV

and the PC output connector on

your computer.

2

Connect a PC Audio Cable

between the PC IN [AUDIO] jack

on the TV and the Audio Out jack of

the sound card on your computer.

When using an HDMI/DVI cable

connection, you must use the HDMI IN

1 (DVI) terminal.

➣

Using a D-Sub Cable

1

Connect an HDMI/DVI cable

between the HDMI IN 1 (DVI) jack

on the TV and the PC output jack

on your computer.

2

Connect a 3.5 mm Stereo miniplug

/ 2RCA Cable between the DVI

AUDIO IN [R-AUDIO-L] jack on the

TV and the Audio Out jack of the

sound card on your computer.

Using an HDMI/DVI Cable

Using a D-Sub Cable

TV Rear Panel

PC

1

HDMI/DVI Cable

(Not supplied)

2

3.5 mm Stereo mini-plug/

2RCA Cable (Not supplied)

Using an HDMI/DVI Cable

When connecting a PC, match the

color of the connection terminal to the

cable.

➣

TV Rear Panel

1

HDMI Cable (Not supplied)

PC

1

Connect an HDMI cable between

the HDMI IN 1 (DVI), 2, 3 or 4 jack

on the TV and the PC output jack on

your computer.

Each PC has a different back panel

configuration.

➣

Using an HDMI Cable

TV Side Panel

oror

BN68-01884F-00Eng.indd 8 2009-02-26 �� 4:43:10

English-9

U Move E Enter m Skip

Auto Program

Select the Antenna source to memorize.

Air

Cable

Auto

Start

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

1

2

With the power on, press the MENU button.

The main menu appears on the screen.

The menu’s left side has the following icons: Picture,

Sound, Channel, Setup, Input, Application, Support.

Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER

E

button to access the

icon’s sub-menu. Press the EXIT button to exit.

The on-screen menus disappear from the

screen after about one minute.

➣

Storing Channels in Memory

(Automatic Method)

1

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then

press the ENTER

E

button.

2

Press the ▲ or ▼ button to select “Auto Program”,

then press the ENTER

E

button.

3

Press the ▲ or ▼ button to select the antenna

connection, then press the ENTER

E

button.

4

When selecting the Cable TV system: Press the

ENTER

E

button to start the auto program.

Press the ▲,▼, ◄ or ► to select the correct analog

signal cable system source among “STD”, “HRC”,

and “IRC”. Press the ▲ or ▼ button to select “Start”,

then press the ENTER

E

button. If you have Digital

cable TV, select the cable system signal source for

both Analog and Digital.

Viewing the Menus

5

The TV begins memorizing all available stations.

Press the EXIT button to exit.

To Stop the Auto Program Function

Press the MENU button while the Auto Program function is

being executed. You can also press the ENTER

E

button

to stop the setup.

Checking to see if Channels were Stored in Memory

Press the CH button. Only the channels stored in memory

will be selected (in order).

Selecting the antennas

• Air: “Air” antenna signal.

• Cable: “Cable” antenna signal.

• Auto: “Air” and “Cable” antenna signals.

After all the available channels are stored, it

starts to remove scrambled channels. The Auto

program menu then reappears.

➣

Auto Program

Auto Program in Progress.

Stop

Cable 38

50%

DTV Cable : 12 Cable : 32

E Enter m Skip

Auto Program

Removing scrambled channel.

Stop

DTV Cable 41

77%

DTV Cable : 16 Cable : 45

E Enter m Skip

Auto Program

Selects the cable system.

Analog

Digital

HRC IRC

HRC IRCSTD

Start

STD

U Move E Enter m Skip

BN68-01884F-00Eng.indd 9 2009-02-26 �� 4:43:11

English-10

Setting the Channel List

You can delete or add a channel to display the channels

you want.

1

Press the MENU button. Press the ▲ or ▼ button to

select “Channel”, then press the ENTER

E

button.

Press the ▲ or ▼ button to select “Channel List”,

then press the ENTER

E

button.

2

Press the ◄ button to select “Added Channels”.

Press the ▲ or ▼ button to select “All Channels”.

Press the ENTER

E

button.

3

Press the ▲ or ▼ button to select a channel to

delete, then press the TOOLS button. Press the

ENTER

E

button to select “Delete”.

4

Press the ▲ or ▼ button to select a channel to add,

then press the TOOLS button. Press the ENTER

E

button and the channel is added.

Changing the Picture Standard

You can select the type of picture which best corresponds

to your viewing requirements.

1

Press the MENU button to display the menu.

Press the ENTER

E

button, to select “Picture”.

2

Press the ENTERE button to select “Mode”.

Press the ▲ or ▼ button to select “Dynamic”,

“Standard” or “Movie”.

Press the ENTER

E

button.

Picture

Mode

:

Standard

►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Dynamic

Standard

Movie

Setting Your Favorite Channels

You can set channels you watch frequently as favorites.

1

Press the MENU button. Press the ▲ or ▼ button to

select “Channel”, then press the ENTERE button.

Press the ▲ or ▼ button to select “Channel List”,

then press the ENTERE button.

2

Press the ◄ button to select “Added Channels”.

Press the ▲ or ▼ button to select “All Channels”.

Press the ENTER

E

button.

3

Press the ▲ or ▼ button to select a channel as a

favorite channel. Press the TOOLS button.

4

Press the ▲ or ▼ button to select “Add to Favorite”,

then press the ENTERE button. The “♥” symbol

will be displayed and the channel will be set as a

favorite.

The "♥" symbol will be displayed and the

channel will be set as a favorite.

All favorite channels will be shown in the

"Favorite" menu.

➣

Picture Mode

• Dynamic: Selects the picture for high-definition in a bright

room.

•

Standard: Selects the picture for the optimum display in a

normal environment.

•

Movie: Selects the picture for viewing movies in a dark

room.

2 Air

4 Air

4-2 ♥ TV #8

8 Air

13 Air

13-1 ♥ TV #3

Alice’s Adventures in Wonderland

All Channels

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

Auto Program

Air

Zoom Select

T

Tools

2 Air

4 Air

4-2 ♥ TV #8

8 Air

13 Air

13-1 ♥ TV #3

Alice’s Adventures in Wonderland

All Channels

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

Auto Program

Air

Zoom Select

T

Tools

BN68-01884F-00Eng.indd 10 2009-02-26 �� 4:43:11

English-11

Mode : Standard

Backlight : 8

►

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Advanced Settings

Picture

8Backlight

Enter Return

AdjustMove

Customizing the Picture Settings

Your television has several setting options that allow you to

control the picture quality.

1

To select the desired picture mode, follow the

“Changing the Picture Standard” instructions

numbers 1 and 2.

2

Press the ▲ or ▼ button to select “Backlight”,

“Contrast”, “Brightness”, “Sharpness”, “Color” or

“Tint(G/R)”, then press the ENTER

E

button.

3

Press the ◄ or ► button to decrease or increase

the value of a particular item. Press the EXIT button

to exit.

When you make changes to “Backlight”,

“Contrast”, “Brightness”, “Sharpness”, “Color”

or “Tint(G/R)”, the OSD will be adjusted

accordingly.

In PC mode, you can only make changes to

“Backlight”, “Contrast” and “Brightness”.

Settings can be adjusted and stored for each

external device you have connected to an input

of the TV.

The energy consumed during use can be

significantly reduced if the brightness level of

the picture is lowered, which will reduce the

overall running cost.

➣

Picture Adjustment

• Backlight: Adjusts the brightness of LCD back light.

•

Contrast: Adjusts the contrast level of the picture.

•

Brightness: Adjusts the brightness level of the picture.

•

Sharpness: Adjusts the edge definition of the picture.

•

Color: Adjusts color saturation of the picture.

•

Tint(G/R): Adjusts the color tint of the picture.

Setting the Screen Size

Occasionally, you may want to change the size of the

image on your screen. Your TV comes with six screen size

options, each designed to work best with specific types of

video input. Your cable box or satellite receiver may have

its own set of screen sizes as well. In general, though, you

should view the TV in 16:9 mode as much as possible.

1

To select the desired picture mode, follow the

“Changing the Picture Standard” instructions

number 1.

2

Press the ▲ or ▼ button to select “Picture Options”,

then press the ENTERE button. Press the ▲ or

▼ button to select “Size”, then press the ENTERE

button.

3

Press the ▲ or ▼ button to select the screen format

you want. Press the ENTERE button.

Press the EXIT button to exit.

• 16:9

: Sets the picture to 16:9 wide mode.

• Zoom1: Magnifies the size of the picture on the screen.

• Zoom2

: Magnifies the size of the picture more than

“Zoom1”.

•

Wide Fit: Enlarges the aspect ratio of the picture to fit the

entire screen.

• 4:3: Sets the picture to 4:3 normal mode.

•

Screen Fit: Use the function to see the full image without

any cutoff when HDMI (720p/1080i/1080p), Component

(1080i/1080p) or DTV (1080i) signals are input.

BN68-01884F-00Eng.indd 11 2009-02-26 �� 4:43:11

English-12

TV

AV1 ----

AV2 ----

Component1 ----

Component2 ----

PC ----

Refresh

T

Tools

To Select the Source

Press the SOURCE button on the Remote Control

You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you

would like to watch.

Available signal sources: TV, AV1, AV2, Component1, Component2, PC, HDMI1/DVI, HDMI2, HDMI3. (LN52B550)

TV, AV, Component, PC, HDMI1/DVI, HDMI2, HDMI3. (LN32B550, LN37B550, LN40B550, LN46B550)

You can choose only those external devices that are connected to the TV. In the “Source List”, connected inputs will be

highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.

Using the Color buttons on the remote with the Source list

• Red (Refresh): Refreshes the connected external devices. Press this if your Source is on and connected, but does not

appear in the list.

• TOOLS (Tools): Displays the “Edit Name” and “Information” menus.

➣

BN68-01884F-00Eng.indd 12 2009-02-26 �� 4:43:11

English-13

Troubleshooting

If the TV seems to have a problem, first try this list of possible problems and solutions.

If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. (726-7864)

Problem Possible Solution

Poor picture Try another channel. / Adjust the antenna. / Check all wire connections.

Poor sound quality. Try another channel. / Adjust the antenna.

No picture or sound. Try another channel. / Press the SOURCE button. /

Make sure the TV is plugged in. / Check the antenna connections.

No sound or sound is too low at maximum

volume.

First, check the volume of units connected to your TV (digital broadcasting

receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV

volume accordingly.

Picture rolls vertically. Check all wire connections.

There is a problem with the picture Run the Picture test in the Self diagnostic menu.

There is a problem with the sound Run the Sound test in the Self diagnostic menu.

The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again.

The TV won’t turn on. Make sure the wall outlet is working.

Remote control malfunctions Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

'Check signal cable' message. Ensure that the signal cable is rmly connected to the PC source.

'Not Supported Mode' message. Check the maximum resolution and connected device’s Video frequency.

Compare these values with the data in the Display Modes.

Digital broadcasting screen problem. Please check the digital signal strength and input antenna.

The image is too light or too dark. Adjust the Brightness and Contrast. / Adjust the Fine tuning.

Black bars on the screen. Make sure the broadcast you’re receiving is High Denition (HD).

HD channels sometimes broadcast Standard Denition (SD) programming, which

can cause black bars.

Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.

Picture has a Red/Green or Pink tint. Make sure the Component cables are connected to the correct jacks.

Closed Captioning not working. If you are using a Cable/Satellite box, you must set Closed Captioning on the box,

not your TV.

Snowy picture. Your cable box may need a rmware upgrade. Please contact your Cable

company.

Ghosting on picture This is sometimes caused by compatibility issues with your cable box.

Try connecting Component cables instead.

Horizontal bars appear to icker, jitter or

shimmer on the image.

Adjust the Coarse tuning and then adjust the Fine tuning.

Vertical bars appear to icker, jitter or

shimmer on the image.

Adjust the Coarse tuning and then adjust the Fine tuning.

Screen is black and power indicator light

blinks steadily.

On your computer check: Power, Signal Cable.

The TV is using its power management system.

Move the computer's mouse or press any key on the keyboard.

Image is not centered on the screen. Adjust the horizontal and vertical position.

The screen position must be adjusted on the output source (i.e. STB) with a

digital signal.

The picture appears distorted in the

corner of the screen.

If "Just Scan" is selected with some external devices, the picture may appear

distorted in the corner of the screen. This symptom is caused by the external

devices, not TV.

The 'Resets all settings to the default

values' message appears.

This appears when you press and hold the EXIT button for a while. The product

settings are reset to the factory defaults.

BN68-01884F-00Eng.indd 13 2009-02-26 �� 4:43:11

Français-1

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Pour enregistrer ce produit, veuillez SVP aller à :

www.samsung.com/register

LN32B550/LN37B550/LN40B550/

LN46B550/ LN52B550

STOP

Veuillez SVP ne pas

retourner cet appareil.

En cas de problèmes de fonctionnement,

veuillez composer le numéro suivant :

1-800-SAMSUNG (1-800-726-7864)

Pour obtenir de l’assistance en ligne,

allez au lien suivant :

www.samsung.com/support

Panneau arrière

1

!

0

8

9

1

6

7

2 3 4 5

1 HDMI IN 1 (DVI), 2, 3, 4 /

DVI AUDIO IN [R-AUDIO-L]

2 PC IN [PC] / [AUDIO]

3 DIGITAL AUDIO OUT (OPTICAL)

4 EX-LINK

5 AUDIO OUT [R-AUDIO-L]

6 USB

7 AV IN 2

8 ANT IN

9 COMPONENT IN 1, 2 / AV IN 1

0 VERROU KENSINGTON

! PUISSANCE CONSOMMÉE

Sortie audio – tableau comparatif des performances

OPTICAL (Digital)

AUDIO (Analog)

La meilleure

Normale

Entrée vidéo – tableau comparatif des performances

HDMI/DVI

PC/COMPONENT

VIDEO

La meilleure

Excellente

Normale

/

Centre d’appel – heures de service (du lundi au dimanche, de 9 h à 12 h (HNE)

Guide d'installation rapide

BN68-01884F-00Eng.indd 1 2009-02-26 �� 4:43:14

Page is loading ...

BN68-01884F-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de

atención al cliente de SAMSUNG.

Country

Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc.,

Service à la Clientèle 55 Standish Court

Mississauga, Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com

Samsung Electronics America, Inc.

105 Challenger Road

Ridgefield Park, NJ 07660-0511

BN68-01884F-00Eng.indd 15 2009-02-26 �� 4:43:25

Samsung LN52B550K1F User manual

Samsung LN52B550K1F User manual

in other languages

Related papers

Other documents