Optimus B-F50XS User manual

Optimus
Brand
Optimus
Model
B-F50XS
Category
Microphone accessories
Type
User manual

Optimus B-F50XS

Optimus B-F50XS is a microphone stand base that allows you to connect microphones to mixers/amplifiers and provides power to them. It's equipped with an XLR input connector for the microphone and an XLR output connector for the audio cable. It can be used with both dynamic and electret microphones.

The device offers phantom power, which allows you to power condenser microphones that require this type of power supply. Alternatively, you can use batteries to power the microphones. The base also features a switch to select the type of microphone you're using (dynamic or electret), as well as an on/off switch and an LED indicator to show the microphone's status.

Optimus B-F50XS

Optimus B-F50XS is a microphone stand base that allows you to connect microphones to mixers/amplifiers and provides power to them. It's equipped with an XLR input connector for the microphone and an XLR output connector for the audio cable. It can be used with both dynamic and electret microphones.

The device offers phantom power, which allows you to power condenser microphones that require this type of power supply. Alternatively, you can use batteries to power the microphones. The base also features a switch to select the type of microphone you're using (dynamic or electret), as well as an on/off switch and an LED indicator to show the microphone's status.

Page is loading ...
INSTRUCTION MANUAL
B-F50XS Version 1.0 1/1
B-F50XS
WARNING:
⋅ Installation by qualified personnel only.
⋅ Keep microphone cable away from electric wiring to
avoid interferences.
⋅ Ensure that all speakers are separated from
microphone to avoid feedbacks.
⋅ Do not expose the equipment to heat or flame sources.
MICROPHONE STAND BASE
SPECIFICATIONS
Plug the microphone onto the upper audio input socket, and then connect the audio cable to the rear audio output socket.
This base can be used with Dynamic or Electret microphones. Select the used microphone type from back panel switch.
- ECM MIC unbalanced: select this option when using unbalanced Electret microphones. Powered by batteries.
- ECM MIC balanced: select this option when using balanced Electret microphones. Powered by batteries or Phantom.
- DYNAMIC MIC: select this option when using Dynamic microphones. No power is required.
In case of using batteries, install them in its compartment verifying the correct polarity.
In case of using Phantom power supply; check that this feature is activated in the mixer/amplifier where the microphone is connected.
The upper switch is used to open and close the mircrophone, while the LED switch shows its current status, activated when
microphone is opened and deactivated when microphone is closed.
Model B-F50XS
Frequency range 20 ~ 20.000 Hz
Input Connector Female XLR
Output Connector Male XLR
Phantom Power 9~52 Vdc
Battery Power supply 2 x 1,5 V
Dimensions (mm) 153.6 x 140 x 50
Weight 1.1 kg
INSTALLATION
  • Page 1 1
  • Page 2 2

Optimus B-F50XS User manual

Optimus
Brand
Optimus
Model
B-F50XS
Category
Microphone accessories
Type
User manual

Optimus B-F50XS

Optimus B-F50XS is a microphone stand base that allows you to connect microphones to mixers/amplifiers and provides power to them. It's equipped with an XLR input connector for the microphone and an XLR output connector for the audio cable. It can be used with both dynamic and electret microphones.

The device offers phantom power, which allows you to power condenser microphones that require this type of power supply. Alternatively, you can use batteries to power the microphones. The base also features a switch to select the type of microphone you're using (dynamic or electret), as well as an on/off switch and an LED indicator to show the microphone's status.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents