Samsung BD-E5500 User manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Blu-ray

™

Disc Player

user manual

BD-E5500

ENGLISH

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 1 2012-04-20 오전 9:55:00

|

2 English

Safety Information

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a

CLASS 1 LASER product. Use of controls,

adjustments or performance of procedures

other than those specified herein may result in

hazardous radiation exposure.

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN. AVOID

EXPOSURE TO THE BEAM (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND

DO NOT REPAIR YOURSELF. REFER

SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates "dangerous voltage"

inside the product that presents a risk of

electric shock or personal injury.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK) NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

This symbol indicates important instructions

accompanying the product.

Do not install this equipment in a confined

space such as a bookcase or similar unit.

WARNING

To prevent damage which may result in fire

or electric shock hazard, do not expose this

appliance to rain or moisture.

CAUTION

Blu-ray Disc Player USES AN INVISIBLE

LASER BEAM WHICH CAN CAUSE

HAZARDOUS RADIATION EXPOSURE IF

DIRECTED. BE SURE TO OPERATE Blu-ray

Disc Player CORRECTLY AS INSTRUCTED.

CAUTION

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVERS

AND DO NOT REPAIR YOURSELF. REFER

SERVICING TO QUALIFIED PERSONNEL.

This product satisfies CE regulations when

shielded cables and connectors are used

to connect the unit to other equipment.

To prevent electromagnetic interference

with electric appliances, such as radios

and televisions, use shielded cables and

connectors for connections.

IMPORTANT NOTE

The mains lead on this equipment is supplied

with a molded plug incorporating a fuse. The

value of the fuse is indicated on the pin face

of the plug.

If it requires replacing, a fuse approved to

BS1362 of the same rating must be used.

Never use the plug with the fuse cover

omitted if the cover is detachable. If a

replacement fuse cover is required, it must be

of the same colour as the pin face of the plug.

Replacement covers are available from your

dealer.

If the fitted plug is not suitable for the power

points in your house or the cable is not long

enough to reach a power point, you should

obtain a suitable safety approved extension

lead or consult your dealer for assistance.

However, if there is no alternative to cutting

off the plug, remove the fuse and then safely

dispose of the plug. Do not connect the plug

to a mains jack, as there is a risk of shock

hazard from the bared flexible cord.

To disconnect the apparatus from the mains,

the plug must be pulled out from the mains

socket, therefore the mains plug shall be

readily operable.

The product unit accompanying this user

manual is licenced under certain intellectual

property rights of certain third parties.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 2 2012-04-20 오전 9:55:00

English 3

|

01 Safety Information

Precautions

Important Safety Instructions

Read these operating instructions carefully

before using the unit. Follow all the safety

instructions listed below.

Keep these operating instructions handy for

future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including AV

receivers) that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade or

the third prong are provided for your

safety. If the provided plug does not fit

into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where it exits the apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket,

or table specified by

the manufacturer, or

sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as when the power-supply

cord or plug is damaged, liquid has

been spilled or objects have fallen into

the apparatus, the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been dropped.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches

on a disc may reduce

sound and picture quality

or cause skipping

- Avoid touching the surface of a disc

where data has been recorded.

- Hold the disc by the edges so that

fingerprints will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or

dirt on a disc, clean it with

a mild detergent diluted in

water and wipe with a soft

cloth.

- When cleaning, wipe gently from the

inside to the outside of the disc.

• Disc Storage

`

Do not keep in direct sunlight.

`

Keep in a cool ventilated area.

`

Keep in a clean protection jacket and

store vertically.

Handling Cautions

• Do not expose this apparatus to dripping

or splashing. Do not put objects filled with

liquids, such as vases on the apparatus.

• To turn this apparatus off completely, you

must pull the power plug out of the wall

socket. Consequently, the power plug must

be easily and readily accessible at all times.

• Do not plug multiple electric devices into

the same wall socket. Overloading a socket

can cause it to overheat, resulting in a fire.

• Maintenance of Cabinet.

- Before connecting other components to

this player, be sure to turn them off.

- If you move your player suddenly

from a cold place to a warm place,

condensation may occur on the

operating parts and lens and cause

abnormal disc playback. If this occurs,

unplug the player, wait for two hours,

and then connect the plug to the power

outlet. Then, insert the disc, and try to

play back again.

• If the product makes an abnormal noise

or produces a burning smell or smoke,

turn off the power switch immediately and

disconnect the power plug from the wall

outlet. Then, contact the nearest customer

service centre for technical assistance. Do

not use the product. Using the product as

it is may cause a fire or an electric shock.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 3 2012-04-20 오전 9:55:02

|

4 English

Safety Information

Using the 3D function

IMPORTANT HEALTH AND SAFETY

INFORMATION FOR 3D PICTURES.

Read and understand the following safety

information before using the 3D function.

• Some viewers may experience discomfort

while viewing 3D TV such as dizziness,

nausea, and headaches.

If you experience any such symptom,

stop viewing 3D TV, remove the 3D Active

Glasses, and rest.

• Watching 3D images for an extended

period of time may cause eye strain. If you

feel eye strain, stop viewing 3D TV, remove

your 3D Active Glasses, and rest.

• A responsible adult should frequently check

on children who are using the 3D function.

If there are any reports of tired eyes,

headaches, dizziness, or nausea, have the

child stop viewing 3D TV and rest.

• Do not use the 3D Active Glasses for other

purposes (Such as general eyeglasses,

sunglasses, protective goggles, etc.)

• Do not use the 3D function or 3D Active

Glasses while walking or moving around.

Using the 3D function or 3D Active Glasses

while moving around may cause you to

bump into objects, trip, and/or fall, and

cause serious injury.

• If you want to enjoy 3D content, connect

a 3D device (3D compliant AV receiver or

TV) to the player's HDMI OUT port using a

high-speed HDMI cable. Put on 3D glasses

before playing the 3D content.

• The player outputs 3D signals only through

HDMI cable connected to the HDMI OUT

port.

• As the video resolution in 3D play mode

is fixed according to the resolution of the

original 3D video, you can not change the

resolution to your preference.

• Some functions such as BD Wise, screen

size adjustment, and resolution adjustment

may not operate properly in 3D play mode.

• You must use a high-speed HDMI cable for

proper output of the 3D signal.

• Stay at least three times the width of the

screen from the TV when watching 3D

images. For example, if you have a 46-inch

screen, stay 138 inches (11.5 feet) from the

screen.

• Place the 3D video screen at eye level for

the best 3D picture.

• When the player is connected to some 3D

devices, the 3D effect may not function

properly.

• This player does not convert 2D content

into 3D.

• "Blu-ray 3D" and "Blu-ray 3D" logo are

trademarks of the Blu-ray Disc Association.

Copyright

user's manual may be reproduced or copied

without the prior written permission of

Samsung Electronics Co.,Ltd.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 4 2012-04-20 오전 9:55:02

English 5

|

Contents

SAFETY INFORMATION

2 Warning

3 Precautions

3 Important Safety Instructions

3 Disc Storage & Management

3 Handling Cautions

4 Using the 3D function

4 Copyright

GETTING STARTED

6 Disc and Format Compatibility

6 Disc types and contents your player can

play

6 Disc types your player cannot play

7 Region Code

7 Logos of Discs the player can play

8 Supported Formats

9 Accessories

10 Front Panel

10 Rear Panel

11 Remote Control

11 Tour of the Remote Control

CONNECTIONS

12 Connecting to a TV

12 Connecting to an Audio System

12 Method 1 Connecting to an HDMI

supported AV receiver

12 Method 2 Connecting to an AV receiver

with Dolby Digital or DTS decoder

13 Connecting to a Network Router

13 Wired Network

13 Wireless Network

SETTINGS

14 The Initial Settings Procedure

14 The Home Screen

14 Accessing the Settings Screen

14 Buttons on the Remote Control Used for

the Settings Menu

15 Settings Menu Functions

18 Networks and the Internet

18 Configuring Your Network Connection

20 Upgrading Software

20 By Internet

20 By USB

20 By Disc

21 Via download

21 Download in Standby Mode

MEDIA PLAY

22 Insert a Disc

22 Insert a USB Device

22 My Contents

22 My Devices

23 Controlling Video Playback

23 Buttons on the Remote Control used for

Video Playback

23 Using the Tools Menu

24 Controlling Music Playback

24 Buttons on the Remote Control used for

Music Playback

24 Repeat an Audio CD (CD-DA)/MP3

24 Playlist

24 Playing Photo Contents

24 Using the Tools Menu

NETWORK SERVICES

25 Using Smart Hub

25 Smart Hub at a Glance

25 BD-LIVE™

26 Using the AllShare Network Function

26 To Download the AllShare Software

26 Playing Content Located on Your PC or

DLNA Device through the Blu-ray Disc

Player

APPENDIX

27 Compliance and Compatibility Notice

27 Copy Protection

28 Network Service Disclaimer

28 Licence

29 Additional Information

29 Note

31 Resolution according to the contents type

32 Digital Output Selection

33 Troubleshooting

34 Repairs

35 Specifications

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 5 2012-04-20 오전 9:55:02

|

6 English

Getting Started

Disc and Format Compatibility

Disc types and contents your player can play

Media Disc Type Details

VIDEO

Blu-ray Disc

3D Blu-ray Disc

BD-ROM or BD-RE/-R recorded in the BD-RE format.

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have

been recorded and finalized, or a USB storage media containing DivX,

MKV, MP4 contents.

MUSIC

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB

storage media containing MP3 or WMA contents.

PHOTO

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB

storage media containing JPEG contents.

| NOTE |

\

The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

\

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

\

Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

\

Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 25

Mbps.

\

Playback may not work for some types of discs, or when you use specific functions, such as angle change and

aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if

necessary.

\

When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

Disc types your player cannot play

• HD DVD

• DVD-ROM/PD/

MV, etc

• DVD-RAM

• Super Audio CD

(except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/

CDV/CD-G/CD-I/LD

(CD-Gs play audio

only, not graphics.)

• 3.9 GB DVD-R for

Authoring.

| NOTE |

\

This player may not respond to all operating commands because some Blu-ray Discs, DVDs, and CDs allow

specific or limited operation and provide only certain features during playback.

Please note that this is not a defect in the player.

\

Samsung cannot guarantee that this player will play every disc bearing the Blu-ray Disc, DVD or CD logo

because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and

CD software and/or the manufacture of discs.

\

Please contact the SAMSUNG Customer Care Centre if you have questions or encounter difficulty when playing

Blu-ray Disc, DVD, or CD in this player. Also, refer to rest of this user manual for additional information on

playback restrictions.

\

Some commercial discs and DVDs purchased outside your region may not play on this player.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 6 2012-04-20 오전 9:55:02

English 7

|

02 Getting Started

Region Code

Both players and discs are coded by region.

These regional codes must match for a disc to play. If the codes do not match, the disc will not

play.

The Region Number for this player is displayed on the rear panel of the player.

Disc Type Region Code Area

Blu-ray Disc

A

North America, Central America, South America, Korea, Japan, Taiwan, Hong

Kong and South East Asia.

B

Europe, Greenland, French territories, Middle East, Africa, Australia and New

Zealand.

C

India, China, Russia, Central and South Asia.

DVD-VIDEO

1

The U.S., U.S. territories and Canada

2

Europe, Japan, the Middle East, Egypt, South Africa, Greenland

3

Taiwan, Korea, the Philippines, Indonesia, Hong Kong

4

Mexico, South America, Central America, Australia, New Zealand, Pacific

Islands, Caribbean

5

Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia

6

China

Logos of Discs the player can play

Blu-ray Disc 3D Blu-ray Disc BD-LIVE

DivX PAL broadcast System in U.K., France, Germany, etc.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 7 2012-04-20 오전 9:55:05

|

8 English

Getting Started

Supported Formats

Video File Support

File

Extension

Container Video Codec Resolution

Frame rate

(fps)

Bit rate

(Mbps)

Audio Codec

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.3gp

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

AVI

MKV

ASF

MP4

3GP

VRO

VOB

PS

TS

DivX 3.11/

4.x/5.x/6.1

1920x1080

6~30

20

Dolby Digital

LPCM

AAC

HE-AAC

WMA

MP3

DTS

MPEG4 SP/ASP

H.264 BP/

MP/HP

25

Window

Media Video v9

1920x1080

25

MPEG2

24/25/30

MPEG1 352x288

24/25/3 20

`

Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be played

if its content is defective or corrupted.

- Normal playback is not guaranteed if the file's container information is wrong or the file itself

is corrupted.

- Files having higher bit or frame rates than standard may stutter when played back.

- The seek (skip) function is not available if the file's index table is damaged.

- When you playback a file remotely through a network connection, video playback may

stutter depending on the network speed.

- Some USB/Digital camera devices may not be compatible with the player.

`

Video decoder

- Supports up to H.264 Level 4.1

- Does not support GMC 2 or higher

`

Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA 9 PRO multi-channel or lossless audio if the number of channels is

more than 2.

- Does not support WMA sampling rate of 22050Hz mono.

`

Comments

- MPEG4 : Supports up to GMC 1-Warping Point.

- H.264 : Supports up to BP/MP/HP Level 4.1.

- WMV : Supports V9, VC1 SP/MP/AP L3.

- MPEG1 : Does not support D-picture.

- MPEG2 : Supports up to Hight Profile High Level.

Ğ

Supported DivX subtitle file formats

*.ttxt, *.smi, *.srt, *.sub, *.txt

| NOTE |

\

Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate.

Music File Support

File Extension Container Audio Codec Support Range

*.mp3

MP3

MP3 -

*.wma

WMA

* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48

* Bit rates - All bit rates in the range 5kbps to 384kbps.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 8 2012-04-20 오전 9:55:05

English 9

|

02 Getting Started

Notes on the USB connection

• Your player supports USB storage media,

MP3 players, digital cameras, and USB

card readers.

• Some USB/digital camera devices may not

be compatible with the player.

• Your player supports the FAT16, FAT32,

and NTFS files systems.

• Connect USB devices directly to the

player's USB port. Connecting through

a USB cable may cause compatibility

problems.

• Inserting more than one memory device

into a multi-card reader may cause the

reader to operate improperly.

• The player does not support the PTP

protocol.

• Do not disconnect a USB device during a

"loading" process.

• The bigger the image resolution, the longer

the image takes to display.

• This player cannot play MP3 files with DRM

(Digital Rights Management) downloaded

from commercial sites.

• Your player only supports video that is

under 30fps (frame rate).

• Your player only supports USB Mass

Storage Class (MSC) devices such as

thumb drives and USB HDD. (HUB is not

supported.)

• Certain USB HDD Devices, multi-card

readers and thumb drives may not be

compatible with this player.

• If a USB device requires excessive power, it

may be limited by the circuit safety device.

• If playback from a USB HDD is unstable,

provide additional power by plugging the

HDD into a wall socket.

If the problem continues, contact the USB

HDD manufacturer.

• You must remove USB Storage devices

using the "Safely Remove USB" function

to prevent possible damage to the USB

memory.

Press the HOME button to move to the

home screen, press the YELLOW (C)

button, and then press the

v

button.

• SAMSUNG is not responsible for any data

file damage or data loss.

• Your player does not support NTSF

compressed files, sparse files, or encrypted

files.

- You can repair or format a USB device

on your Desktop PC. (MS-Windows OS

only)

AVCHD (Advanced Video Codec High

Definition)

• This player can play back AVCHD format

discs. These discs are normally recorded

and used in camcorders.

• The AVCHD format is a high definition

digital video camera format.

• The MPEG-4 AVC/H.264 format

compresses images with greater efficiency

than the conventional image compressing

format.

• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that

use "x.v.Color" format.

• "x.v.Color" is a trademark of Sony Corporation.

• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.

and Sony Corporation.

| NOTE |

\

Some AVCHD format discs may not play, depending on the recording conditions.

AVCHD format discs need to be finalized.

\

"x.v.Color" offers a wider colour range than normal DVD camcorder discs.

Accessories

Check for the supplied accessories below.

Batteries for Remote Control (AAA Size) HDMI cable

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

1

4

7

VOL

+

2

5

8

0

VOL

–

3

6

9

SOURCE

DISC MENU

HOME REPEAT

TITLE MENU

VOL VOL

POPUP

A B C D

BONUS SUBTITLE FULL

SCREEN

SAMSUNG TV

SMART

HUB

– +

INFOTOOLS

RETURN

EXIT

AUDIO

VIEW

User Manual Remote Control

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 9 2012-04-20 오전 9:55:07

|

10 English

Getting Started

Front Panel

| NOTE |

\

To upgrade the player's software through the USB Host jack, you must use a USB memory stick.

\

When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the

player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press

the

v

button.

Rear Panel

LAN

HDMI OUT DIGITAL AUDIO OUT

DISPLAY USB HOST

REMOTE CONTROL SENSOR

DISC TRAY

POWER BUTTON

OPEN/CLOSE BUTTON

PLAY/PAUSE

BUTTON

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 10 2012-04-20 오전 9:55:07

English 11

|

02 Getting Started

Remote Control

Tour of the Remote Control

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

1

4

7

VOL+

2

5

8

0

VOL–

3

6

9

SOURCE

DISC MENU

HOME REPEAT

TITLE MENU

VOL VOL

POPUP

A B C D

BONUS SUBTITLE FULL

SCREEN

SAMSUNG TV

SMART

HUB

– +

INFOTOOLS

RETURN

EXIT

AUDIO

VIEW

Press to open and close the disc tray.

After setup, allows you to select the input

source on your TV.

(This button only works with Samsung TVs.)

Turn the player on and off.

Return to the previous menu.

These buttons are used both for menus

on the player and also several Blu-ray Disc

functions.

Press numeric buttons to operate options.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to search backwards or forwards.

Use to access various audio functions on a

disc.

Press to use Smart Hub.

Press to stop a disc.

Press to move to the home menu.

Turn the TV on and off.

(This button only works with Samsung TVs.)

TV volume adjustment.

(This button only works with Samsung TVs.)

Press to pause a disc.

Press to play a disc.

Press to switch the Blu-ray Disc/DVD's

subtitle language.

Press to use the Tools menu.

Use to display the playback information.

Use to select menu items and change menu

values.

Press to exit the menu.

Use to enter the popup menu/title menu.

Press to use repeat function.

Press to use bonusview function. Press to use the full screen function.

Installing batteries

| NOTE |

\

If the remote does not operate properly:

-

Check the polarity +/– of the batteries.

-

Check if the batteries are drained.

-

Check if the remote sensor is blocked by obstacles.

-

Check if there is any fluorescent lighting nearby.

| CAUTION |

\

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 11 2012-04-20 오전 9:55:07

|

12 English

Connections

Connecting to a TV

Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN

jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other

connections.

- When you change the connections, turn off all devices before you start.

| NOTE |

\

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out

on the player to an audio system to hear audio.

\

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your

TV.

\

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first

time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

\

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

\

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI

cable.

\

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the

screen.

Audio

Video

Connecting to an Audio System

You can connect the Blu-ray player to an the audio system using one of the methods illustrated

below.

- Do not connect the power cord to the wall outlet until you have made all the other

connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN

jack on your receiver.

• Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the

product to the Digital Coaxial In jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

AudioAudio

Method 2Method 1

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 12 2012-04-20 오전 9:55:08

English 13

|

03 Connections

Connecting to a Network

Router

You can connect your player to your network

router using one of the methods illustrated

below.

To use the AllShare network functionality, you

must connect your PC to your network as

shown in the illustrations.

The connection can be wired or wireless.

Wired Network

| NOTE |

\

Internet access to Samsung's software update

server may not be allowed, depending on the router

you use or your ISP's policy. For more information,

contact your ISP (Internet Service Provider).

\

DSL users, please use a router to make a network

connection.

Wireless Network

| NOTE |

\

Use only the Samsung wireless LAN adapter

with this player. (Model name:WIS12ABGNX).

Do not use this wireless adapter with any third-

party players.

To purchase the Samsung wireless LAN adapter,

visit your Samsung retailer.

Broadband

service

Broadband

service

Broadband modem

(with integrated router)

Broadband

modem

Router

Or

\

If your wireless router supports DHCP, this player

can use a DHCP or static IP address to connect to

the wireless network.

\

Set your wireless router to Infrastructure mode. Ad-

hoc mode is not supported.

\

The player supports only the following wireless

security key protocols:

-

WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

\

Select a channel on the wireless router that is not

currently being used. If the channel set for the

wireless router is currently being used by another

device nearby, it will result in interference and

communication failure.

\

If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your

router to WEP, TKIP or TKIP-AES (WPS2Mixed), the

player will not support a connection in compliance

with new Wi-Fi certification specifications.

\

Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (router

performance, distance, obstacles, interference by

other radio devices, etc).

Broadband

service

Wireless Router

Wireless LAN

Adapter

(not included)

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 13 2012-04-20 오전 9:55:08

|

14 English

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not

configure the initial settings.

• The OSD (On Screen Display) may change in this

player after you upgrade the software version.

• The access steps may differ depending on the

menu you selected.

The Initial Settings Procedure lets you set

the OSD and menu languages, configure the

connection to your home network, choose

the aspect ratio output (screen size and

format) that is correct for your TV.

| NOTE |

\

If you skip Network Setup during the Initial Settings

procedure, you can configure your network settings

later. See "Configuring Your Network Connection"

on pages 18~19 for instructions.

\

If you want to display the Initial Settings screen

again and make changes, select Settings > System

> Initial Settings in the Home screen or select the

Reset option. (See page 16)

\

If you want to use an Anynet+(HDMI-CEC) function,

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-CEC)-

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in

both the TV and the player.

3) Set the TV to the Initial Settings Procedure.

`

Selecting an Option on the Home Screen

1. To select an option on the Home screen,

move the cursor using the ◄► buttons

until it highlights the option of your

choice, and then press the

v

button.

| NOTE |

\

If you leave the player in the stop mode for more

than 5 minutes without using it, a screen saver will

appear on your TV. If the player is left in the screen

saver mode for more than 20 minutes, the power

will automatically turn off.

Accessing the Settings Screen

1. Select Settings on the Home screen,

and then press the

v

button. The

Settings screen appears.

2. To access the Settings menus, sub-

menus, and options, please refer to the

remote control illustration and the table

to the right.

The Home Screen

1

My Contents : Lets you select contents

located on connected devices by type to view

or play: You can select videos, photos, or

music.

2

My Devices : Lets you select a connected

device to play or access. The device can be

the player itself, a device directly connected

to the player, such as a USB thumb drive, or

a device connected via your network, such

as a shared drive on your PC.

3

Smart Hub : Starts Smart Hub. From Smart

Hub, you can access YouTube, games, and

other apps.

4

Settings : Set various functions to suit your

personal preferences.

Buttons on the Remote Control

Used for the Settings Menu

1

HOME Button : Press to move to the Home

screen.

2

RETURN Button : Return to the previous

menu.

3

v

(Enter) / DIRECTION Buttons :

• Press ▲▼◄► to move the cursor or

select an item.

• Press the

v

button to activate the

currently selected item or confirm a

setting.

4

EXIT Button : Press to exit the current menu.

Detailed Function Information

Each Settings function, menu item, and

individual option is explained in detail on-

screen. To view an explanation, use the

▲▼◄► buttons to select the function, menu

item, or option. The explanation will usually

appear on the right side of the screen.

A short description of each Settings function

starts on the next page. Additional information

on some of the functions is also in the

Appendix of this manual.

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

1

4

7

VOL

+

2

5

8

0

VOL

–

3

6

9

SOURCE

DISC MENU

HOME REPEAT

TITLE MENU

VOL VOL

POPUP

A B C D

BONUS SUBTITLE FULL

SCREEN

SAMSUNG TV

SMART

HUB

– +

INFOTOOLS

RETURN

EXIT

AUDIO

VIEW

1

2

4

3

SettingsSmart Hub

Videos

Photos

Music

My Devices

My Contents

42

1

3

Settings

3D Settings

TV Aspect

: 16:9 Original

Smart Hub Screen Size

: Size 2

BD Wise

: On

Resolution

: Auto

HDMI

Colour Format : Auto

Movie Frame (24Fs)

: Auto

HDMI Deep

Colour

: Auto

Display

Audio

Network

System

Language

Security

General

Support

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 14 2012-04-20 오전 9:55:09

English 15

|

04 Settings

Settings Menu Functions

Display

3D Settings

Select whether to play a Blu-ray Disc with 3D

contents in 3D Mode.

•

If you move to the Home or Smart Hub Home

screen while in 3D mode, the player will

switch to 2D automatically.

TV Aspect

Lets you adjust the output of the player to the

screen size and screen format of your TV.

Smart Hub Screen

Size

Lets you select the optimal size for the Smart

Hub Screen.

BD Wise

BD Wise is Samsung's latest inter-connectivity

feature.

When you connect a Samsung player and a

Samsung TV with BD Wise to each other via

HDMI, and BD Wise is on in both the player

and TV, the player outputs video at the video

resolution and frame rate of the Blu-ray Disc/

DVD.

Resolution

Set the output resolution of the HDMI video

signal to Auto, 1080p, 1080i, 720p or

576p/480p.

The number indicates the number of lines of

video per frame.

The i and p indicate interlaced and progressive

scan, respectively. Generally, the higher the

number of lines, the higher the picture quality.

HDMI Colour Format

Lets you set the colour space format for the

HDMI output so that it matches the capabilities

of the connected device (TV, monitor, etc). The

screen goes black momentarily after you have

selected a format.

Display

Movie Frame (24Fs)

If the player is connected to a 24Fs compatible

TV, setting the Movie Frame (24Fs) feature to

Auto lets the player adjust its HDMI output to 24

frames per second automatically for improved

picture quality.

•

You can enjoy the Movie Frame (24Fs) feature

only on a TV supporting this frame rate.

•

Movie Frame is only available when the

player is in the HDMI 1080i or 1080p output

resolution modes.

HDMI Deep Colour

Lets you set the product to output HDMI video

with Deep Colour. Deep Colour provides more

accurate colour reproduction with greater colour

depth.

Still Mode

Lets you set the type of picture the player

displays when you pause DVD playback.

Progressive Mode

Lets you improve picture quality when viewing

DVDs.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 15 2012-04-20 오전 9:55:09

|

16 English

Settings

Audio

Digital Output

Lets you select the digital audio output format

that is suitable for your TV or AV Receiver. For

more details, see the digital output selection

table on page 32.

PCM Downsampling

Lets you choose to have 96Khz PCM signals

downsampled to 48Khz before they are

outputted to an amplifier. Choose On if your

amplifier or receiver is not compatible with a

96Khz signal.

Dynamic Range

Control

Lets you apply dynamic range control to Dolby

Digital, Dolby Digital Plus, and Dolby True HD

audio.



Auto : Automatically controls the dynamic

range of Dolby TrueHD audio, based on

information in the Dolby TrueHD soundtrack.

Also turns dynamic range control on for Dolby

Digital and Dolby Digital Plus.



Off : Leaves the dynamic range

uncompressed, letting you hear the original

sound.



On : Turns dynamic range control on for all

three Dolby formats. Quieter sounds are

made louder and the volume of loud sounds

is reduced.

Downmixing Mode

Lets you select the multi-channel downmix

method that is compatible with your stereo

system. You can choose to have the player

downmix to normal stereo or to surround

compatible stereo.

Network

Network Settings

Configure the network connection so you can

enjoy various features such as Internet services

or AllShare, and perform software upgrades.

Network Status

Lets you check the current network and Internet

status.

BD-Live Internet

Connection

Set to allow or prohibit an Internet connection

when you use the BD-LIVE service.

System

Initial Settings

You can set the language, Network Settings,

etc. by using the Initial Settings function.

Quick Start

Lets you set the player to turn on quickly by

decreasing the boot time.

| NOTE |

\

If this function set to On, Standby power

consumption will be increased.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers

linked operations with other Samsung players

that have the Anynet+ feature and lets you

control those products with one Samsung TV

remote. To operate this function, you must

connect this player to an Anynet+ Samsung TV

using an HDMI cable.

BD Data

Management

Lets you manage the downloaded contents you

accessed through a Blu-ray Disc that supports

the BD-LIVE service.

Time Zone

You can specify the time zone that is applicable

to your area.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 16 2012-04-20 오전 9:55:09

English 17

|

04 Settings

System

DivX® Video On

Demand

View DivX® VOD Registration Codes to

purchase and play DivX® VOD contents.

Reset

Resets all settings to their default settings except

for the network and Smart Hub settings.

The default security PIN is 0000.

Language

You can select the language you prefer for the Home menu, disc menu,

etc.



On-Screen Menu : Select the language for the on-screen displays.



Disc Menu : Select the language for the disc menu displays.



Audio : Select the language for the disc audio.



Subtitle : Select the language for the disc subtitles.

| NOTE |

\

The selected language will only appear if it is supported on the disc.

Security

The default PIN is 0000. Enter the default PIN to access the security

function if you haven't created your own password.



BD Parental Rating : Prevents playback of Blu-ray Discs with a rating

equal to or above a specific age rating unless you enter the security

PIN.



DVD Parental Rating : Prevents playback of DVDs with a rating above

a specific numerical rating unless you enter the security PIN.



Change Password : Change the 4-digit PIN used to access security

functions.

`

If you forgot your PIN:

1.

Remove any disc or USB storage device.

2.

Press and hold the

p

button on the front panel for 5 seconds or

more.

All settings will revert to the factory settings.

General

Network Remote

Control

The Network Remote Control function lets you

control your Blu-ray Disc player from a remote

device such as a smart phone through a wireless

connection to your local area network.

1.

Select On in the Network Remote Control

menu.

2.

Install the Samsung network remote

control application to control your player

on your compatible portable device.

3.

Make sure your portable device and your

player are connected to the same wireless

router.

4.

Start the application on your portable

device. The application should find your

player and display it on a list.

5.

Select the player.

6.

If this is the first time you are using the

function, it will ask you to allow or deny

remote control of the player. Select Allow.

7.

Follow the instructions that came with the

application to control the player.

Support

Software Upgrade

For more information about the Software

Upgrade function, see "Upgrading Software" on

pages 20~21.

Contact Samsung

Provides contact information for assistance with

your player.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 17 2012-04-20 오전 9:55:09

|

18 English

Settings

Networks and the Internet

When you connect this player to a network,

you can use network based applications and

functions such as Smart Hub and BD-LIVE,

and upgrade the player's software through

the network connection. For more information

about accessing and using Internet services,

see the Network Services chapter of this

manual on pages 25~26. Instructions for

configuring the network connection start

below.

Configuring Your Network

Connection

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

If you are connecting to a wired network,

connect the player to your router using a

LAN cable before you start the configuration

procedure.

If you are connecting to a wireless network,

disconnect any wired network connection

before you begin.

To begin configuring your network connection,

follow these steps:

1. In the Home menu, select Settings, and

then press the

v

button.

2. Select Network, and then press the

v

button.

3. Select Network Settings, and then

press the

v

button.

The Network Settings screen appears.

Wired Network

Ğ

Wired - Automatic

To setup, follow steps 1 to 3 in "Configuring

Your Network Connection" on page 18.

1. Select Wired in the Network Settings

screen, and then press the

v

button.

The Network Status screen appears.

The player verifies the network

connection and then connects to the

network.

Ğ

Wired - Manual

If you have a static IP address or the

Automatic procedure does not work, you'll

need to set the Network Settings values

manually.

1. Select Wired in the Network Settings

screen, and then press the

v

button.

The Network Status screen appears.

The player attempts to verify the network

connection and fails.

2. Select IP Settings on the bottom of the

screen, and press the

v

button.

The IP Settings screen appears.

3. Select the IP Mode field, and then set it

to Manual.

4. Use the number keypad on your remote

to enter the Network values. Use the

▲▼◄► buttons on the remote to move

from entry field to entry field.

5. When done, highlight OK, and then

press the

v

button. The Network

Status screen appears. The player

verifies the network connection and then

connects to the network.

< Getting the IP Settings values >

You can view your Network Settings values

on most Windows computers. To view the

Network Settings values, follow these steps:

• Windows XP

1. Right click the Network icon on the

bottom right of the Windows desktop.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the

Support tab.

4. On the Support tab, click the Details

button.

The Network settings are displayed.

• Windows 7

1. Click the Network icon on the bottom

right of the Windows desktop.

2. In the pop-up menu, click Network and

Sharing Centre.

3. On the dialog that appears, click the

Local Area Connection or Wireless

Network Connection depending on your

network connection.

4. On the Support tab, click the Details

button.

The Network settings are displayed.

Settings

Display

Audio

Network

System

Language

Security

General

Support

Network Settings

>

Move

"

Enter

'

Return

Select a network connection type.

Wired

Wireless

(general)

WPS(PBC)

Connect to the network using a LAN cable. Please make

sure that the LAN cable is connected.

Settings

Display

Audio

Network

System

Language

Security

General

Support

Network Settings

a

Move

"

Enter

'

Return

MAC Address XX:XX:XX:XX:XX:XX

IP Address

0.0.0.0

Subnet Mask

0.0.0.0

Gateway

0.0.0.0

DNS Server

0.0.0.0

IP auto setting failed. Try the following to set up the IP automatically:

- Ensure that the DHCP server is enabled on the router, then restart router.

- Contact your Internet service provider for more information.

Alternatively, set up the IP manually by selecting IP Settings.

IP Settings Retry OK

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 18 2012-04-20 오전 9:55:10

English 19

|

04 Settings

| NOTE |

\

Depending on your Windows version, the

information may differ.

Wireless Network

You can setup a wireless network connection

in three ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

When you configure the wireless network

connection, any wireless network devices

currently connected through the player

or, if applicable, the player's current wired

connection, will be disconnected.

Ğ

Wireless (general) - Automatic

To setup, follow steps 1 to 3 in "Configuring

Your Network Connection" on page 18.

1. Select Wireless (general) in the

Network Settings screen, and then

press the

v

button.

The player searches for and then

displays a list of the available networks.

2. Select the desired network, and then

press the

v

button.

The Security screen appears.

3. On the Security screen, enter your

network's Security Code or Pass

Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter

letters by selecting a letter with an

arrow button, and then pressing the

v

button.

4. When done, select Done at the bottom

of the screen, and then press the

v

button. The Network Status screen

appears. The player verifies the network

connection and then connects to the

network.

| NOTE |

\

You should be able to find the Security Code or

Pass Phrase on one of the set up screens you used

to set up your router or modem.

Ğ

Wireless (general) - Manual

If you have a static IP address or the

Automatic procedure does not work, you'll

need to set the Network Settings values

manually.

After following Steps 1 to 3 in "Configuring

Your Network Connection" on page 18.

1. Select Wireless (general) in the

Network Settings screen, and then

press the

v

button.

The Network Status screen appears.

The player attempts to verify the network

connection and fails.

2. Select IP Settings on the bottom of the

screen, and then press the

v

button.

The IP Settings screen appears.

3. Select the IP Mode field, and then set it

to Manual.

- For the IP setting values, see "Getting

the IP Settings values" on page 18.

4. Use the number keypad on your remote

to enter the Network values. Use the

▲▼◄► buttons on the remote to move

from entry field to entry field.

5. When done, highlight OK, and then

press the

v

button.

The Security screen appears.

6. On the Security screen, enter your

network's Security Code or Pass

Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter

letters by selecting a letter with an

arrow button, and then pressing the

v

button.

7. When done, select Done at the bottom

of the screen, and then press the

v

button. The Network Status screen

appears. The player verifies the network

connection and then connects to the

network.

Ğ

WPS(PBC)

To setup, follow steps 1 to 3 in "Configuring

Your Network Connection" on page 18.

1. Select WPS(PBC) in the Network

Settings screen, and then press the

v

button.

The player searches for and then

displays a list of the available networks.

2. Press the WPS(PBC) button on your

router within two minutes. Your player

automatically acquires all the network

settings values it needs and connects

to your network. The Network Status

screen appears. The player connects

to the network after the network

connection is verified.

Settings

Display

Audio

Network

System

Language

Security

General

Support

Network Settings

a

Move

"

Enter

'

Return

1/11

Refresh

WEP

WPA

WEP

XXXXX

Select your wireless router from the list:

Settings

Display

Audio

Network

System

Language

Security

General

Support

Network Settings

a

Move

"

Enter

'

Return

MAC Address XX:XX:XX:XX:XX:XX

IP Address

0.0.0.0

Subnet Mask

0.0.0.0

Gateway

0.0.0.0

DNS Server

0.0.0.0

IP auto setting failed. Try the following to set up the IP automatically:

- Ensure that the DHCP server is enabled on the router, then restart router.

- Contact your Internet service provider for more information.

Alternatively, set up the IP manually by selecting IP Settings.

KT_WLAN

IP Settings Retry OK

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 19 2012-04-20 오전 9:55:10

|

20 English

Settings

Upgrading Software

The Software Upgrade menu allows you to

upgrade the player's software for performance

improvements or additional services.

• Never turn the player off or back on manually

during the update process.

1. In the Home screen, select Settings,

and then press the

v

button.

2. Select Support, and then press the

v

button.

3. Select Software Upgrade, and then

press the

v

button.

4. Select one of the following methods:

• By Internet

• By USB

• By Disc

• Via download

• Download in Standby Mode

5. Press the

v

button.

| NOTE |

\

The upgrade is complete when the player turns off,

and then turns on again by itself.

\

Samsung Electronics takes no legal responsibility

for player malfunction caused by an unstable

Internet connection or consumer negligence during

a software upgrade.

\

If you want to cancel the upgrade while the upgrade

software is downloading, press the

v

button.

\

When the system upgrade is progressing, "UP" is

displayed on the front panel.

By Internet

Your player must be connected to the Internet

to use the By Internet function.

1. Select By Internet, and then press the

v

button. The Connecting to Server

message appears.

2. If there is a download available, the

Download pop-up appears with a

progress bar and the download starts.

3. When the download is complete, the

Upgrade Query window appears with

three choices: Upgrade Now, Upgrade

Later, or Don't Upgrade.

4. If you select Upgrade Now, the player

upgrades the software, turns off, and

then turns on automatically.

5. If you do not make a selection in one

minute or select Upgrade Later, the

player stores the new upgrade software.

You can upgrade the software later

using the Via download function.

6. If you select Don't Upgrade, the player

cancels the upgrade.

By USB

1. Visit www.samsung.com.

2. Click SUPPORT on the top right of the

page.

3. Enter the product's model number into

the search field, and then click Find

Product.

4. Click Get downloads in the centre of

the page below the Downloads header.

5. Click Firmware in the centre of the

page.

6. Click the ZIP icon in the File column on

the right side of the page.

7. Click OK in the pop-up that appears to

download and save the firmware file to

your PC.

8. Unzip the zip archive to your computer.

You should have a single folder with the

same name as the zip file.

9. Copy the folder to a USB flash drive.

10. Make sure no disc is inserted in the

player, and then insert the USB flash

drive into the USB port of the player.

11. In the player's menu, go to Settings >

Support > Software Upgrade.

12. Select By USB.

| NOTE |

\

There should be no disc in the player when you

upgrade the software using the USB Host jack.

\

When the software upgrade is done, check the

software details in the software Upgrade menu.

\

Do not turn off the player during the software

upgrade.

It may cause the player to malfunction.

\

Software upgrades using the USB Host jack must

be performed with a USB flash memory stick only.

By Disc

1. Follow Steps 1 through 7 in By USB.

2. Unzip the zip archive to your computer.

You should have a single folder with the

same name as the zip file.

3. Write the folder onto a disc. We

recommend a CD-R or DVD-R.

4. Finalize the disc before you remove it

from your computer.

5. Insert the disc into the player.

6. In the player's menu, go to Settings >

Support > Software upgrade.

7. Select By Disc.

| NOTE |

\

When the system upgrade is done, check the

software details in the software Upgrade menu.

\

Do not turn off the player during the Software

Upgrade.

It may cause the player malfunction.

02227X-BD-E5500-ZN_SJ_SH-ENG.indd 20 2012-04-20 오전 9:55:10

Page is loading ...

Samsung BD-E5500 User manual

Samsung BD-E5500 User manual

in other languages

Related papers

Other documents