TodownloadthisUser’sGuideinEnglish,Spanish,orFrench,ortogetanswerstofrequentlyaskedquestions,visit
thesupportsectionat:www.iLiveElectronics.com
ParadescargaresteManualdelUsuarioeninglés,españolyfrancés,oparaobtenerrespuestasapreguntas
frecuentes,visitelaseccióndeapoyoen:www.iLiveElectronics.com
Pourtéléchargerceguidedel’utilisateurenanglais,espagnoloufrançais,oupourobtenirdesréponsesàdes
questionsfréquemmentposées,consultezlarubriqued’assistancesur:www.iLiveElectronics.com
ForWarrantyInformationandthemostup-to-dateversionofthisUser’sGuide,gotowww.iLiveElectronics.com
Copyright©2015DigitalProductsInternational(DPI,Inc.)Allothertrademarksappearinghereinaretheproperty
oftheirrespectiveowners.Specicationsaresubjecttochangewithoutnotice.
INTERNATIONAL SUPPORT
AUX INDC INPOWER
ON OFF
AUX INDC INPOWER
ON OFF
POWER & CHARGING
Requires a Micro-USB to USB cable (included).
Whentheunitischarging,theLED indicatoronthefrontoftheunitwill display
solid red.Whentheunitisfullycharged,theLED indicator will turn o.
1. UsingaMicro-USBtoUSBcable(included),connectthelargerUSB plugto
theUSB portofapoweredoncomputerorUSBpoweradaptor(included).
2. ConnectthesmallerMicro-USB plugintotheMicro-USB portoftheunit.
Theunitwillnowcharge.
Note: Be sure the computer is not in sleep mode.
Use PC to Charge
Use AC/DC Power Adapter to Charge
AUX INDC INPOWER
ON OFF
Using Aux In (3.5mm Audio Input)
Requires a 3.5mm audio cable (included).
1. Connecta3.5mmaudiocabletotheAux InInputontherearoftheunitand
theaudio output/headphone jackonamediaplayer.
2. Theunitwillautomaticallydetecttheinputandswitchto Aux In Mode.
This is indicated by a solid blue LED light on the front of the unit.
3. Usethecontrolsontheconnecteddeviceortheunittoselectandplay
audio,andadjustthevolume.
BLUETOOTH
Pairing to a Device and Playing Audio
1. PowerontheunitbyslidingthePower Switchonthereartothe
ONposition.
2. Thisunit’sdefaultmodeafterbeingpoweredonisBluetooth Mode.
This is indicated by a ashing blue LED light on the front of the unit.
3. PressandholdthePairbutton.
The blue LED light will begin to ash quickly. When pairing, remain within 3 feet
of the unit.
4. UsingthecontrolsonyourBluetoothdevice,scanforandselectISB385in
yourBluetoothsettingstopair.Ifyourdevicerequestsapassword,enterthe
defaultpassword0 0 0 0.
Refer to the user’s manual for your specic device for instructions on pairing
and connecting Bluetooth devices.
5. Whensuccessfullypaired,theblue LED lightwillturnsolid.
6. Usethecontrolsontheconnecteddeviceortheunittoselectandplay
audio,andadjustthevolume.
7. AudioplayedthroughtheconnectedBluetoothdevicewillnowbeheard
throughthespeaker.
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired or you nd it is unable to connect, repeat the above steps.
AUX IN