Torchiere Floor Lamp
User Manual
Light Your Home,Power Your Life
We provide 12-month warranty for the light and 60-day
money back guarantee for quality problems.
If there is any question before or during the use of our light,
please kindly contact us by clicking “ask a question” button
in our store, and send us an email. We will respond to your
email as soon as we can.
Warranty
Contact Us:
5
· Cautions
1. This movable floor lamp is not suitable to place on a
tilted surface.
2. If the floor lamp needs any inspection and repair, please
entrust qualified professionals.
3. The floor lamp is only for indoor use. Please keep it away
from wet or damp locations.
4. Please don't touch the floor lamp with your wet hands when
it is on.
On/off
Brightness +
Brightness -
Color Temperature
➄
➀
➁
➂
➃
:Press to turn on/off the light.
:Press to increase the brightness.
:Press to decrease the brightness.
:Press to adjust the color temperature.
On/off
Night Light Mode
Brightness +
Brightness -
Color Temperature +
Color Temperature -
On/off
· How to use
3
Method 2: Remote Controller
The remote controller has been matched with the floor lamp before
leaving the factory. It's out-of-the-box.
Please stick the wall switch on the wall through double-side tape.
Through walls to use the wall switch is not recommended.
Step 2: If the floor lamp flashes three times, the match is successful.
Otherwise, please repeat the whole steps above until the match succeeds.
Step 3: Press any button on the remote controller for any lighting effect.
Method 3: Wireless Wall Switch
Note: The remote controller can be attached to the pole of the floor lamp.
Q2: How to install the wireless wall switch?
Q3: What is the applicable range of the wall switch?
Press to turn on/off the floor lamp.
Q1: What can you do if the remote controller doesn't work?
Step 1: Please keep the lamp on, disconnect the power and then
connect again. Short press“ ” and “ ” simultaneously to match,
which must be finished in 10s after the lamp is plugged in again.
· Qusetion & Answers
4
The longest remote control distance is 42.8ft under
unobstructed conditions.
Package Includes
Versatile Lighting
1. Torchiere Floor Lamp x 1
2. Remote Controller x 1
3. Wireless Wall Switch x 1
4. User Manual x 1
5. Adapter x 1
Living room, bedroom, study room,
restaurant, hotel, office, kids room,
or college dorm.
20W
LEPOWER
2000lm
70.9 inches
3000K-5000K
CRI
Model
IL-US-YX3050-
DM-241A0-02
Maximum Wattage
Brand
Luminous Flux Color Temperature
Torchiere Floor Lamp
1. Twist the pole segments tightly successively shown as ➀~➂;
2. Install the round base shown as ➃. Please be careful to avoid
the heavy base hitting you;
3. Connect the pole of the lamp head shown as ➄;
4. Connect the cord with the adapter.
Cord Length Material
· Installation
· Specifications
2
>80
Metal+PC
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications
to this device not explicitly approved by manufacturer could void
your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must accept any interference
received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure
requirement.
The device can be used in portable exposure condition, compliance
with exposure requirements.
6
We provide 12-month warranty for the light and 60-day
money back guarantee for quality problems.
If there is any question before or during the use of our light,
please kindly contact us by clicking “ask a question” button
in our store, and send us an email. We will respond to your
email as soon as we can.
Warranty
Contact Us:
6
Mother Daughter Floor Lamp
User Manual
Light Your Home,Power Your Life
Package Includes
Versatile Lighting
1. Mother Daughter Floor Lamp x 1
2. Remote Controller x 1
3. Wireless Wall Switch x 1
4. User Manual x 1
5. Adapter x 1
Living room, bedroom, study room,
restaurant, hotel, office, kids room,
or college dorm.
>8024W
LEPOWER
2400lm
70.9 inches
3000K-5000K
Metal+PC
CRI
Model IL-US-ZM3050-
DM-241A0-02
Maximum Wattage
Brand
Luminous Flux Color Temperature
Mother Daughter Floor Lamp
1. Twist the pole segments tightly successively shown as ➀~➂;
2. Install the round base shown as ➃. Please be careful to avoid
the heavy base hitting you;
3. Connect the pole of the lamp head shown as ➄;
4. Connect the cord with the adapter.
Cord Length Material
· Installation
· Specifications On/off
Brightness +
Brightness -
Color Temperature
➄
➀
➁
➂
➃
:Press to turn on/off the light.
:Press to increase the brightness.
:Press to decrease the brightness.
:Press to adjust the color temperature.
On/off
Night Light Mode
Brightness +
Brightness -
Color Temperature +
Color Temperature -
On/off
On/off
· How to use
Method 2: Remote Controller
The remote controller has been matched with the floor lamp before
leaving the factory. It's out-of-the-box.
Please stick the wall switch on the wall through double-side tape.
Through walls to use the wall switch is not recommended.
Step 2: If the floor lamp flashes three times, the match is successful.
Otherwise, please repeat the whole steps above until the match succeeds.
Step 3: Press any button on the remote controller for any lighting effect.
Method 3: Wireless Wall Switch
Note: The remote controller can be attached to the pole of the floor lamp.
Q2: How to install the wireless wall switch?
Press to turn on/off the floor lamp.
Method 4: Reading light switch
Press the button at the bottom of the reading light to turn it on or off.
Step 1: Please keep the lamp on, disconnect the power and then
connect again. Short press“ ” and “ ” simultaneously to match,
which must be finished in 10s after the lamp is plugged in again.
Q1: What can you do if the remote controller doesn't work?
· Qusetion & Answers
Q3: What is the applicable range of the wall switch?
No, the reading light can only be controlled by the bottom button,
not by touch switches, remote controls, or wireless wall switches.
Q4: Can reading light be controlled in other ways than with
the bottom button?
The longest remote control distance is 42.8ft under
unobstructed conditions.
· Cautions
1. This movable floor lamp is not suitable to place on a
tilted surface.
2. If the floor lamp needs any inspection and repair, please
entrust qualified professionals.
3. The floor lamp is only for indoor use. Please keep it away
from wet or damp locations.
4. Please don't touch the floor lamp with your wet hands when
it is on.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI