FLASH F5300003 Mega FOAM Machine Frame Case User manual
- Type
- User manual
FLASH F5300003 Mega FOAM Machine Frame Case
The FLASH F5300003 Mega FOAM Machine Frame Case is a high-powered foam machine that can produce up to 110 cubic meters of foam per minute. It is perfect for use in large venues, such as nightclubs, concert halls, and festivals. The machine is also great for use in outdoor events, as it is weather-resistant and can be used in temperatures up to 40 degrees Celsius.
The FLASH F5300003 Mega FOAM Machine Frame Case is easy to use and maintain. It comes with a user-friendly control panel that makes it easy to adjust the foam output and angle. The machine also has a self-cleaning function that makes it easy to keep clean.
FLASH F5300003 Mega FOAM Machine Frame Case
The FLASH F5300003 Mega FOAM Machine Frame Case is a high-powered foam machine that can produce up to 110 cubic meters of foam per minute. It is perfect for use in large venues, such as nightclubs, concert halls, and festivals. The machine is also great for use in outdoor events, as it is weather-resistant and can be used in temperatures up to 40 degrees Celsius.
The FLASH F5300003 Mega FOAM Machine Frame Case is easy to use and maintain. It comes with a user-friendly control panel that makes it easy to adjust the foam output and angle. The machine also has a self-cleaning function that makes it easy to keep clean.
User Manual
Instrukcja Obsługi
F5300003
Mega FOAM Machine
+ Frame + Case
User Manual •Instrukcja Obsługi
• Please keep this User Manual for future
user, be sure that they also receive this
instruction booklet.
• Unpack and check carefully there is no
transportation damage before using the
• Before operating, ensure that the voltage
and frequency of power supply match the
• It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
• Disconnect main power before servicing
and maintenance.
•
but always by taking its base.
IMPORTANT!
Do not point strong light output from other fixtures
at the Mega FOAM Machine, as intense illumination
can damaged the equipment.
•
Don’t operate it where the temperature is
higher than this.
• In the event of serious operating problem,
carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare parts.
• Do not connect the device to any dimmer
pack.
• Do not touch any wire during operation and
there might be a hazard of electric shock.
• To prevent or reduce the risk of electrical
or moisture.
• The housing must be replaced if they are
visibly damaged.
• Do not look directly at the LED light spot
2. SAFETY INFORMATION
1. INTRODUCTION
MEGA FOAM MACHINE
Figure 2.
WARNING!
Mega FOAM Machine + Frame + Case • Art No F5300003
The unit should be mounted via its screw
holes on the bracket. Always ensure that
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
high.
state.
foam water pail that has been deployed.
4. INSTALLATION
5. MACHINE OPERATIONS STEPS
3. PRODUCT INFORMATION
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
of people and has no one pass by or under
it.
•
•
•
• 3
•
•
•
•
•
PUMP
BE CAREFULL!!!
must be turned off first, and then fan will
User Manual •Instrukcja Obsługi
Panel
Angle
adjustment
Universal
wheel
adjustment
Pump
and power failure.
6. MACHINE DIAGRAM
Mega FOAM Machine + Frame + Case • Art No F5300003
Pump
blue, white or other colors.
water; one kilogram of foam powder can be diluted
2. After using the machine, the machine water pump
3. Put the water pump into the prepared water. Press
the machine angle to the minimum, witch the machine
head down.
spray is clear water.
is all closed.
3. Please keep the machine out of the reach of children.
is powered on. The power must be cut off.
medical advice.
6. OPERATION MODE OF FOAM POWDER
7. MACHINE CLEANING AND MAINTENANCE
8. MATTERS NEEDING ATTENTION
CAUTION:
User Manual •Instrukcja Obsługi
WAŻNE!
Nie kieruj silnego światła z innych urządzeń
w Mega Foam Machine, ponieważ intensywne
oświetlenie może uszkodzić sprzęt.
1. WPROWADZENIE
UWAGA!
Rysunek 2.
2. ZASADY BEZPIECZENSTWA
MEGA FOAM MACHINE
•
•
•
do sieci elektrycznej.
•
•
•
konstrukcjach.
•
w dobrze wentylowanym pomieszczeniu, w
poprawnie.
Mega FOAM Machine + Frame + Case • Art No F5300003
uszkodzenia spowodowane niestabilnym
Blokada mocowania maszyny
rozrobiona.
sekund.
4. INSTALACJA
5. MACHINE OPERATIONS STEPS
•
•
•
• 3
•
•
•
•
•
OSTROŻNIE !!!
3. INFORMACJE O PRODUKCIE
User Manual •Instrukcja Obsługi
Panel
pochylenia
Zbiornik
Transportowe
Pompy
6. SCHEMAT URZADZENIA
Mega FOAM Machine + Frame + Case • Art No F5300003
Pompy
w innych kolorach.
Proszek po wymieszaniu jest klarowny i przezroczysty.
maszyny.
6. SPOSOB UZYTKOWANIA PREPARATU
7. CZYSZCZENIE I KONSERWACJA MASZYNY
8. KWESTIE WYMAGAJĄCE UWAGI
UWAGA:
User Manual •Instrukcja Obsługi
Mega FOAM Machine + Frame + Case • Art No F5300003
www.flash-butrym.pl
F5300003
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
FLASH F5300003 Mega FOAM Machine Frame Case User manual
- Type
- User manual
FLASH F5300003 Mega FOAM Machine Frame Case
The FLASH F5300003 Mega FOAM Machine Frame Case is a high-powered foam machine that can produce up to 110 cubic meters of foam per minute. It is perfect for use in large venues, such as nightclubs, concert halls, and festivals. The machine is also great for use in outdoor events, as it is weather-resistant and can be used in temperatures up to 40 degrees Celsius.
The FLASH F5300003 Mega FOAM Machine Frame Case is easy to use and maintain. It comes with a user-friendly control panel that makes it easy to adjust the foam output and angle. The machine also has a self-cleaning function that makes it easy to keep clean.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI