Coomber The Performance Combo Mini User manual

Brand: Coomber

Model: The Performance Combo Mini

Type: User manual

Your new Coomber Accessorise your Coomber

We also produce a comprehensive range

of accessories that can help you get more

from your Coomber:

Please contact

Coomber

to place your

order now!

……………………………………………………... .……………………………………………………..

Connecting to your Coomber

Controlling your Coomber

Included in the box

Product Instruction Manual

Performance Combo Mini

1918 Microphone

1850 Wall mounted

speaker bracket

Master

Volume

SD Card

reader

USB

Mic 1

volume

CD Player

(CD Player may be

dierent from the

one in the image)

Mic 2

volume

CD Volume

CD/

Bluetooth

Volume

Line in

Volume

Mic 1 Line

Right

Speaker

Mains

Left

Speaker

Line

Out

Mic 2

Aerials Aerials

Squelch

1858-90W

Mains lead

1987

iPod lead

(model shown is a AT2)

425M or 435 Loudspeaker

Product Instruction Manual

Performance Combo Mini

…………………………………………………….

Power connection

• Connect the power 1858-90W lead into the back

of the unit.

• Tighten cable tie securely.

• Plug into to the mains supply, switch on.

• Turn up the master volume to the required volume.

• The light under the Master Volume will light up.

• FEED a CD printed side up into the slot, the CD can be

CDA format or MP3.

• EJECT - If pressed this will send the disc out.

• SOURCE - When the Source key is pressed you can

toggle between the CD, USB and SD CARD READER.

• FOLDER-When in “stop “mode, select the folder to be

played by scrolling through <<back or >> next folder.

When in the “play” mode, you can skip the track being

played to the next or previous track that is in the folders

list by pressing << or >>.

CAUTION If no sound is heard;

• Check the mute button on the CD, if playing from a CD/

USB/SD Card.

• Turn up the master volume & input volume to the

desired level.

Playing a CD/USB/SD Card

……………………………………………………..

Input Mix Levels

• Each audio input has its own volume level, as a starting

point set all to half volume (12 o’clock) then tweak each

one to your desired level (note at 12 o’clock this is already

pre-set).

• E.g. CD volume slightly lower than Microphone so that

your voice can be heard over the music.

• Then use the master volume to adjust the overall volume

to suit the space and audience.

Wired Microphones

• Plug in a Coomber 1918 microphone to any of the 2 free

microphone ports

• Turn up the control.

Bluetooth

2 free microphone ports

Coomber 1918

microphone

…………………………………………………….

• Turn the unit on.

• Enable Bluetooth on your device– iPod/iPhone etc.

• When discovered Audio Device will be displayed on your

device.

• Select pair or connect on your device.

• An audio notication will be heard and also connected or

paired will be shown on your device.

• You will be able to play music on your device and amplify

it with the Performance Combo.

• Bluetooth range is generally low power Class2 10mtrs

without drop out.

NOTE: If another device is already paired/connected you

will not be able to pair at the same time. You will need to

switch the unit o and on then try again or turn o the

Bluetooth on the other device.

Mains IN

Cable tie holder

and cable tie

1858-90W

Product Instruction Manual

Performance Combo Mini

…………………………………………………….

• Using the supplied 1987 iPod lead connect to the

headphone output of the external device (iPod, phone)

then connect to the Line in on the back panel.

• Use the external device to play and adjust the volume

after it is plugged in.

• You can use your Coomber to adjust the volume.

Remote control & menu features will not control your

external device.

Connecting an iPod or External

audio device

Speakers

Using twist & lock speakon connectors simply locate and

push in and turn into the relevant speaker outlet L & R, then

connect the other end to the speaker, (some speakers may

have a short connecting lead).

If connecting 4 speakers:

• Connect two 1833 Y cables into the L & R speaker outlets

on the back of you Performance Combo Mini.

• Connect two speakon cables to the 1833 Y cable then into

two speakers, repeat for the other side.

Coomber 1987 (rear of unit)

(model shown is a AT2)

1833 Y cables

Speaker

sockets

Note: 425M speakers are supplied with connecting cables -

two stripped wires into the speaker and speakon connecter

Product Instruction Manual

Performance Combo Mini

Tips:

Before you power up please make sure that the master volume knob is down!

When switching o please also turn the main volume all the way down, as the removal of power can cause a loud “POP” as

the control circuitry will shut down before the amplier stage.

When connecting any audio device to an amplier, ensure the volume is turned down during the plugging in & unplugging as

loud noise can be generated. This is especially critical for microphones as they have a sensitive input.

When using microphones for public address, it is wise to ensure wherever possible:

• the microphones are kept as far away from the systems speakers

• keep the microphone behind the front row of speakers and try not to aim the microphone at the speaker,

• turn the volume of the microphone level up slowly if any unwanted noise is heard turn it down slightly, this is likely to

be the level of amplication for your room.

Excessive amplication of the microphone will cause it to pick up its own sound from the speakers and amplify it again

causing audio feedback, its volume control must be turned down to regulate this.

While using a microphone if you walk around the room, as you get close to the speakers this feedback may also occur,

so you either keep further away from the speakers or adjust the volume down.

It is good practice to do a sound check prior to any live event to establish the ideal and maximum levels, these may need to

be tweaked during the performance or as the room lls up as the acoustic properties of the room will change.

Microphones always work best when they are close to the audio source (your mouth) the further away the less signal they

will have to amplify. If you move the microphone closer and further away from you during its use the volume that your

audience will hear will vary dramatically. Keep speaking in a constant level, keep the microphone in a constant distance from

you and everything should be OK.

When using wireless microphones, top tips are test its range, if it is a critical event always t new batteries before the show,

ensure the microphone is turned o immediately after you have used it, check the user knows how to use the microphone.

See Website for Full Safety Information

• Do not use in conned space.

• This unit requires a Coomber 1858-90W Power supply.

• All Coomber equipment is covered by a 12 months warranty against

defective components or faulty manufacture from date of dispatch.

• Any modications to or misuse of the equipment renders this warranty void.

• Equipment that is security marked or damaged cannot,

under any circumstances, be exchanged.

• We reserve the right to change products and specications without notice.

……………………………………………………..

Coomber The Performance Combo Mini User manual

Coomber The Performance Combo Mini User manual

Coomber The Performance Combo Mini User manual

Related papers

Other documents