optitrack V120:TRIO Quick start guide

Brand: optitrack

Model: V120:TRIO

Type: Quick start guide

All other company and or product names are the trademarks of their respective owners.

Friendly Customer Service

If you have any difficulties after reviewing the

documentation, visit our website or call

1.541.753.6645 between 9AM-5PM PT.

Visit www.OptiTrack.com for the latest software

support, sample code, and product news.

P-OT-110.1102 quick start guide

V120: TRIO

V120: DUO

1. Install Tracking Tools Software

2. Plug In Hardware

Download the latest software

installer from the website or

use software CD if included.

Run the installer and follow its

prompts.

USB Uplink

to PC

Left LED Right LED

I/O-X (breakout box)

12 V @ 3 A

+ –

Power

Camera Bar Cable

(see Status LEDs at right)

After starting Tracking Tools software, the device should be ready to track

immediately.

Licensing and calibration are automatic and built into the device.

Warning: Ensure power has been disconnected from the I/O-X (breakout

box) before plugging or unplugging the Camera Bar Cable. Hot-plugging

this cable may damage the device.

Windows 2000, XP, Vista and Windows 7 users must be logged in as an

administrator to install the USB drivers. If you only have one user login on

your computer, you probably have administrator privileges.

* Notes

* Status LEDs

Left LED:

OFF Device is OFF

RED Device in ON

AMBER Device is Recognized

by Tracking Tools

Right LED:

OFF Tracking/Video is NOT ENABLED

Solid-RED Configured for External-Sync –

Sync Not Detected

Flashing-RED Configured for External-Sync –

Sync Detected

Solid-GREEN Configured for Internal-Sync –

Sync Missing

Flashing-GREEN Configured for Internal-Sync –

Sync Present

optitrack V120:TRIO Quick start guide

Brand: optitrack

Model: V120:TRIO

Type: Quick start guide

Download PDF

report

optitrack V120:TRIO Quick start guide

optitrack V120:TRIO Quick start guide

Other documents