Linon Home Decor Aspen Assembly Instructions Manual
- Type
- Assembly Instructions Manual
ITEM
DESCRIPTION
QTY
A-V2
B-V2
C-V2
D-V2
E-V2
F-V2
PAGE 2 OF 9
HARDWARE PACKAGE COUNT
OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER. COUNT EACH PIECE
OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE HARDWARE LIST COLUMN.CALL
CUSTOMER SERVICE IF ANY OF THE PARTS ARE MISSING. FOLLOW THE LETTER IDENTIFICATION
WHEN READING THE ASSEMBLY DRAWING "A-V2" THROUGH "H-V2"
G-V2
IMPORTANT
PLEASE USE ALL HARDWARE MENTIONED ABOVE AS THEY WILL ASSURE THE ITEM'S STABILITY
AND SAFETY. A SCREWDRIVER (NOT PROVIDED BY LINON) IS REQUIRED TO SUCCESSFULLY AND
FULLY ASSEMBLE THE PIECE.
H-V2
8
8
8
16
4
2
4
1
LOCKING BOLTS
CAMS LOCK
CAMS BOLTS
DRAWER SCREWS
HANDLE SCREWS
HANDLES
LONG SCREWS
ALLEN
KEY
PART
#1V2
DESCRIPTION
QTY
1
PAGE 3 OF 9
PART IDENTIFICATION:
TOP
LEFT SIDE FRAME
RIGHT FRAME
RIGHT PARTITION
LEFT PARTITION
SHELF
BOTTOM FRAME
BACK PANELS
DRAWER FRONTS
DRAWER SIDES
DRAWER BACKS
DRAWER BASES
1
1
1
1
1
1
2
2
2
4
2
#2
#3
#4
#3V2
#1V2
#6V2
#7V2
#4V2
#5V2
#2V2
#8V2
#8V2
#9V2
#
10V2
#
10V2
#
12V2
#
11V2
#9V2
#
10V2
#
10V2
#
12V2
#
11V2
#5
#6
#7
#8
#9
#
12
#
11
#
10
V2
V2
V2
V2
V2
V2
V2
V2
V2
V2
V2
INSERT FOUR LOCKING BOLTS (A-V2) INTO SHELF (6V2) AND TIGHTEN.
ATTACH RIGHT AND LEFT PARTITIONS (4V2 & 5V2) TO SHELF (6V2). INSERT TWO CAMS (BV2) INTO
EACH PARTITION (4 V2& 5V2) AS SHOWN. TIGHTEN THE CAMS (B-V2) WITH A SCREWDRIVER (NOT
PROVIDED).
STEP 1
STEP 2
PAGE 4 OF 9
6
V2
6
V2
4
V2
5
V2
A-V2
A-V2
A-V2
A-V2
B-V2
B-V2
B-V2
B-V2
B-V2
STEP 5
STEP 6
PAGE 6 OF 9
INSERT TWO LOCKING BOLTS (A-V2) INTO SIDE FRAME (2V2). ATTACH THE SIDE FRAME (2V2) TO
TOP (1V2). INSERT TWO BOLTS (C-V2) AS SHOWN AND TIGHTEN THE BOLTS (C-V2 ) WITH THE
ALLEN WRENCH (H-V2).
GET THE ASSEMBLED UNIT OF PARTS 4V2,5V2,6V2,7V2, AND 8V2 TO ATTACH TO THE ASSEMBLED
UNIT OF PARTS 1V2 AND 2V2. INSERT TWO BOLTS (C-V2 ) AS SHOWN AND TIGHTEN THE BOLTS
(C-V2 ) WITH ALLEN WRENCH (H-V2). INSERT TWO CAMS (B-V2 ) INTO THE SHELF (6-V2) AND TIGHTEN
THE CAMS (B-V2 ) WITH A SCREWDRIVER (NOT PROVIDED).
2
V2
2
V2
1V2
C-V2
H-V2
A-V2
C-V2
A-V2
A-V2
B-V2
B-V2
2
V2
7
V2
6
V2
C-V2
C-V2
B-V2
H-V2
C-V2
STEP 7
STEP 8
PAGE 7 OF 9
B
ATTACH THE OTHER SIDE FRAME (3V2) TO THE
ASSEMBLED UNIT. INSERT THE REMAINING TWO BOLTS (C-V2 ) AS SHOWN AND TIGHTEN
THE BOLTS (C-V2 ) WITH ALLEN WRENCH (H-V2). INSERT THE REMAINING TWO CAMS (C-V2 ) INTO
THE SHELF (6V2) AND TIGHTEN THE CAMS (C-V2 ) WITH A SCREWDRIVER (NOT PROVIDED).
9
ATTACH DRAWER SIDES (10V2) TO DRAWER FRONT (9V2). INSERT DRAWER SCREWS (D-V2) AS SHOWN
AND TIGHTEN THE SCREWS (D-V2) WITH A SCREWDRIVER (NOT PROVIDED).
INSERT DRAWER BASE (12V2) INTO THE GROOVES ON DRAWER FRONT AND SIDES (9V2 & 10V2).
ATTACH DRAWER BACK PIECE (11-V2) TO THE ASSEMBLED DRAWER UNIT. INSERT DRAWER
SCREWS (D-V2) AS SHOWN AND TIGHTEN THE SCREWS (D-V2) WITH A SCREWDRIVER (NOT PROVIDED).
ATTACH HANDLE (F-V2) ONTO DRAWER FRONT (9V2) AND INSERT HANDLE SCREWS (E-V2) AS SHOWN.
TIGHTEN THE SCREWS (E-V2) WITH A SCREWDRIVER (NOT PROVIDED). FINALLY, SLIDE IN THE
DRAWERS AS SHOWN.
3
V2
3
V2
A-V2
A-V2
C-V2
C-V2
C-V2
C-V2
B-V2
B-V2
C-V2
H-V2
D-V2
D-V2
D-V2
D-V2
D-V2
D-V2
E-V2
11
V2
12
V2
10
V2
V2
10
B-V2
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
