Vollmer 44200 Owner's manual

Vollmer
Brand
Vollmer
Model
44200
Category
Toys
Type
Owner's manual

Vollmer 44200 is a synchronous motor with a voltage range of 12-16 V and a current draw of less than 60 mA. It operates at a speed of 15 rpm and is designed for analog systems. The motor comes with two green plugs for connections, a nut, a wrench, and a user manual. It requires regular maintenance, approximately every 100 hours of operation.

This motor is suitable for various applications where precise and reliable rotation is needed. It can be used in model making, robotics, automation, or other projects that require controlled movement. The low operating voltage and current consumption make it suitable for use with batteries or small power supplies.

Vollmer 44200 is a synchronous motor with a voltage range of 12-16 V and a current draw of less than 60 mA. It operates at a speed of 15 rpm and is designed for analog systems. The motor comes with two green plugs for connections, a nut, a wrench, and a user manual. It requires regular maintenance, approximately every 100 hours of operation.

This motor is suitable for various applications where precise and reliable rotation is needed. It can be used in model making, robotics, automation, or other projects that require controlled movement. The low operating voltage and current consumption make it suitable for use with batteries or small power supplies.

85349
Stand 04/sw
10/2020
SzT
44200
1
Synchronous Motor 12 – 16 V, 60 mA
DE EN
Synchronmotor 12 – 16 V, 60 mA
3. Instandhaltung .......................................1
1. Inhalt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Wichtige Hinweise
1. Contents ............................................1
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Important information
3. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Wichtige Hinweise
Die genaue Installation des Motors entnehmen Sie bitte der Anleitung von Art. 43687,
43696, 43797, 47696, 47713 bzw. Art. 47750.
Sicherheitshinweise
Vorsicht:
Die Anschlussdrähte niemals in eine Steckdose einführen! Verwendetes
Versorgungsgerät (Transformator, Netzteil) regelmäßig auf Schäden überprüfen. Bei
Schäden am Versorgungsgerät dieses keinesfalls benutzen!
Stromschlaggefahr!
2. Important information
For the exact installation, please refer to the manual of items 43687, 43696, 43797,
47696, 47713 or item 47750.
Safety information
Caution:
Never put the connecting wires into a power socket! Regularly examine the transformer
for damage. In case of any damage, do not use the transformer!
Electrical hazard!
Technische Daten
Betriebsstrom:......................................................................................................< 60 mA
Betriebsspannung (ausschließlich Wechselspannung, 50 Hz):......................12 – 16 V ~
Umdrehung: ........................................................................................................15 U/min
System:.................................................................................................................. analog
Wartungsintervall:................................................................................... ca. 100 Stunden
Anschlüsse:.......................................................................................................grün, grün
3. Instandhaltung
Maintenance
System: .............................................................................................................. analogue
Operating voltage (AC only, 50 Hz): .............................................................12 – 16 V AC
Technical Data
Operating current:.................................................................................................< 60 mA
Rev:.........................................................................................................................15 rpm
Connections:..................................................................................................green, green
Service interval:........................................................................................... ca. 100 hours
2
AC
E
B
DF
Klammern mit kleinem
Schraubendreher öffnen.
Unlatch both brackets using a
screwdriver.
Remove red cogwheels 1 and 2 (15 rpm).
Getrieberäder rot 1 und 2 (15 U/min.)
ausbauen.
Sperrhebel 3 und Umschalthebel
4 in abgebildete Position bringen
und ölen. Die glatte Seite des
Sperrhebels muss oben sein.
Latch lever 3 and reversing lever 4
to be brought into place as shown,
lubricate. The smooth surface
of the latch lever to face
upward.
Lagerzapfen ölen, Zwischenräder
rot 1 und 2 aufstecken.
Lubricate pivot, plug on red
cogwheels 1 and 2.
Close motor housing. Attention: the
pivots of the cogwheels must
properly snap into notch of the
cover.
Getriebe mit Deckel verschließen.
Achtung! Lagerzapfen der
Zwischenräder müssen gut im
Deckellager einrasten. Gehäuse mit beiden Klammern verschließen.
Fasten the two brackets.
1
1
2
2
4
3
Made in Europe
Bitte trennen Sie den Motor vor dem Öffnen
zunächst von der Spannungsversorgung!
Please first disconnect the power supply before
opening the engine !
- 2 Stecker
- Schraubenschlüssel
- Anleitung
- Mutter
- Synchronmotor - Synchronous Motor
- Nut
- 2 plugs
- Wrench
- Manual
1. Inhalt 1. Contents
Drehrichtungshebel
rotation direction lever
Do not dispose this product through (unsorted) general trash, but supply it to the recycling.
Entsorgen Sie dieses Produkt nicht über den (unsortierten) Hausmüll, sondern führen Sie es der Wiederverwertung zu.
Montageanleitung
Mounting instruction
  • Page 1 1

Vollmer 44200 Owner's manual

Vollmer
Brand
Vollmer
Model
44200
Category
Toys
Type
Owner's manual

Vollmer 44200 is a synchronous motor with a voltage range of 12-16 V and a current draw of less than 60 mA. It operates at a speed of 15 rpm and is designed for analog systems. The motor comes with two green plugs for connections, a nut, a wrench, and a user manual. It requires regular maintenance, approximately every 100 hours of operation.

This motor is suitable for various applications where precise and reliable rotation is needed. It can be used in model making, robotics, automation, or other projects that require controlled movement. The low operating voltage and current consumption make it suitable for use with batteries or small power supplies.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents