Gigabyte GA-X150-PLUS WS Owner's manual

Brand: Gigabyte

Model: GA-X150-PLUS WS

Type: Owner's manual

For more product details, please visit GIGABYTE's website.

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

GA-X150-PLUS WS

User's Manual

Rev. 1002

12ME-X150PLW-1002R

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or

by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means

the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard

BIOS, drivers, or when looking for technical information.

Example:

Motherboard

GA-X150-PLUS WS

Nov. 6, 2015

Motherboard

GA-X150-PLUS WS

- 3 -

Table of Contents

GA-X150-PLUS WS Motherboard Layout .......................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions .................................................................................... 5

1-2 ProductSpecications ...................................................................................... 6

1-3 Installing the CPU ............................................................................................ 9

1-4 Installing the Memory ....................................................................................... 9

1-5 Installing an Expansion Card ......................................................................... 10

1-6 Back Panel Connectors .................................................................................. 10

1-7 Internal Connectors ........................................................................................ 12

Chapter 2 BIOS Setup ..................................................................................................20

2-1 Startup Screen ............................................................................................... 20

2-2 M.I.T. .............................................................................................................. 21

2-3 System Information ........................................................................................ 26

2-4 BIOS Features ............................................................................................... 27

2-5 Peripherals ..................................................................................................... 30

2-6 Chipset ........................................................................................................... 32

2-7 Power Management ....................................................................................... 33

2-8 Save & Exit ..................................................................................................... 35

Chapter 3 Appendix ......................................................................................................36

3-1 ConguringaRAIDSet .................................................................................. 36

3-2 DriversInstallation .......................................................................................... 38

RegulatoryStatements .............................................................................................. 39

Contact Us ................................................................................................................ 44

- 4 -

GA-X150-PLUS WS Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5GA-X150-PLUS WS motherboard 5Two SATA cables

5Motherboard driver disk 5I/O Shield

5User's Manual

KB_MS

CPU_FAN

ATX_12V_2X4

ATX

F_AUDIO

AUDIO

B_BIOS

DDR4_2

DDR4_1

DDR4_4

DDR4_3

BAT

F_USB2

COMA

Intel® C232

PCI2 CLR_CMOS

CODEC

M_BIOS

PCIEX1_1

PCIEX16

SPDIF_O

F_PANEL

LGA1151

GA-X150-PLUS WS

USB_LAN

Intel®

GbE LAN

PCI1

F_USB30_1

PCIEX1_2

SATA3

iTE®

Super I/O

F_USB1

LPT

PCIe to

PCI Bridge

TPM

PCIEX4

531

420 SYS_FAN3

SATAEXPRESS

M2F_32G

SYS_FAN1

R_USB30_1

SYS_FAN2

80F 60F 42F

THB_C

R_USB30_2

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Priortoinstallation,donotremoveorbreakmotherboardS/N(SerialNumber)stickeror

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

componentssuchasamotherboard,CPUormemory.IfyoudonothaveanESDwriststrap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Donotplacethecomputersystemonanunevensurface.

•Donotplacethecomputersysteminahigh-temperatureorwetenvironment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 5 -

1-2 ProductSpecications

CPU Support for Intel® Xeon® E3-1200 v5 processors/Intel® Core™ i3 processors/

Intel® Pentium® processors/Intel® Celeron® processors

in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel® C232 Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of

physical memory is installed, the actual memory size displayed will be less than the

size of the physical memory installed.

Dual channel memory architecture

Support for DDR4 2133 MHz memory modules

Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and

memory modules.)

Audio

Realtek® ALC892 codec

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Intel® GbE LAN chip (10/100/1000 Mbit)

Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the PCI Express slots. The PCIEX4 slot

operates at up to x1 mode when a PCI Express x1 slot is populated.

2 x PCI Express x1 slots

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

2 x PCI slots

Multi-Graphics

Technology Support for 2-Way AMD CrossFire™ technology

Storage Interface Chipset:

- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe

x4/x2/x1SSDsupport)

- 1 x SATA Express connector

* The SATA Express connector is not compatible with regular SATA devices.

- 6 x SATA 6Gb/s connectors

- SupportforRAID0,RAID1,RAID5,andRAID10

* Refer to "1-7 Internal Connectors," for the supported congurations with the M.2,

SATA Express, and SATA connectors.

- 6 -

USB

Chipset:

- 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through

the internal USB header)

- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through

the internal USB headers)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x M.2 Socket 3 connector

1 x SATA Express connector

6 x SATA 6Gb/s connectors

1 x CPU fan header

3 x system fan headers

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

1 x USB 3.0/2.0 header

2 x USB 2.0/1.1 headers

1 x Trusted Platform Module (TPM) header

1 x Thunderbolt™ add-in card connector

1 x serial port header

1 x parallel port header

1 x Clear CMOS jumper

Back Panel

Connectors

1 x PS/2 keyboard port

1 x PS/2 mouse port

2 x USB 2.0/1.1 ports

4 x USB 3.0/2.0 ports

1 x RJ-45 port

 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side

Speaker Out, Line In, Line Out, Mic In)

I/O Controller

iTE® I/O Controller Chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU/System overheating warning

CPU/System fan fail warning

CPU/System fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 2 x 64 Mbit ash

Use of licensed AMI UEFI BIOS

Support for DualBIOS™

PnP 1.0a DMI2.7 WfM 2.0 SM BIOS 2.7 ACPI 5.0

- 7 -

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functions of each application may also vary depending on motherboard specications.

- @BIOS

Support for Q-Flash

Support for Smart Switch

Support for Xpress Install

Bundled

Software

Norton® Internet Security (OEM version)

cFosSpeed

Operating

System

Support for Windows 10/8.1 64-bit

Support for Windows 7 32-bit/64-bit

* Please download the "Windows USB Installation Tool" from GIGABYTE's website

and install it before installing Windows 7.

Form Factor

ATX Form Factor; 30.5cm x 20.0cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

Please visit GIGABYTE's website

for support lists of CPU, memory

modules,SSDs,andM.2devices.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

- 8 -

1-3 Installing the CPU

ReadthefollowingguidelinesbeforeyoubegintoinstalltheCPU:

•Make sure that the motherboard supports the CPU.

(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locatethenotchesonbothsidesoftheCPUandalignmentkeysontheCPUsocket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•DonotturnonthecomputeriftheCPUcoolerisnotinstalled,otherwiseoverheatinganddamage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically during the process of re-engaging the lever after you insert the CPU.

Alignment

Key

Alignment

Key

LGA1151 CPU Socket

Pin One Corner of the CPU Socket

1-4 Installing the Memory

Readthefollowingguidelinesbeforeyoubegintoinstallthememory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemorymodules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

DualChannelMemoryConguration

ThismotherboardprovidesfourmemorysocketsandsupportsDualChannelTechnology.Afterthememory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

LGA1151 CPU

Notch

Please visit GIGABYTE's website for details on hardware installation.

Triangle Pin One Marking on the CPU

Notch

- 9 -

1-5 Installing an Expansion Card

Readthefollowingguidelinesbeforeyoubegintoinstallanexpansioncard:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-6 Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Usethe upperport (green)to connect a PS/2 mouse and the lower port (purple) to connect a PS/2

keyboard.

USB 3.0/2.0 Port

TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.

Use this port for USB devices.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describesthestatesoftheLANportLEDs.

DuetoCPUlimitations,readthefollowingguidelinesbeforeinstallingthememoryinDualChannelmode.

1. DualChannelmodecannotbeenabledifonlyonememorymoduleisinstalled.

2. WhenenablingDualChannelmodewithtwoorfourmemorymodules,itisrecommendedthatmemory

of the same capacity, brand, speed, and chips be used and installed in the same colored sockets.

DualChannelMemoryCongurationsTable

DDR4_4 DDR4_2 DDR4_3 DDR4_1

2 Modules - - DS/SS - - DS/SS

DS/SS - - DS/SS - -

4 Modules DS/SS DS/SS DS/SS DS/SS

(SS=Single-Sided,DS=Double-Sided,"--"=NoMemory)

USB 2.0/1.1 Port

TheUSBportsupportstheUSB2.0/1.1specication.UsethisportforUSBdevices.

The four memory sockets are divided into two channels and each channel has two memory sockets as following:

ChannelA:DDR4_2,DDR4_4

ChannelB:DDR4_1,DDR4_3

ActivityLED

Connection/

SpeedLED

LAN Port

ActivityLED:Connection/SpeedLED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Datatransmissionorreceivingisoccurring

On No data transmission or receiving is occurring

- 10 -

•Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefrom

your device and then remove it from the motherboard.

•Whenremovingthecable,pullitstraightoutfromtheconnector.Donotrockitsidetosideto

prevent an electrical short inside the cable connector.

Center/Subwoofer Speaker Out (Orange)

Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration.

Rear Speaker Out (Black)

Thisjackcanbeusedtoconnectrearspeakersina4/5.1/7.1-channelaudioconguration.

Side Speaker Out (Gray)

Usethisaudiojacktoconnectsidespeakersina7.1-channelaudioconguration.

Line In (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out (Green)

The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to

connectfrontspeakersina4/5.1/7.1-channelaudioconguration.

Mic In (Pink)

The Mic in jack.

PleasevisitGIGABYTE'swebsitefordetailsonconguringtheaudiosoftware.

- 11 -

1-7 Internal Connectors

Readthefollowingguidelinesbeforeconnectingexternaldevices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1311

14 15

1) ATX_12V_2X4

2) ATX

3) CPU_FAN

4) SYS_FAN1/2/3

5) SATA EXPRESS

6) SATA3 0/1/2/3/4/5

7) M2F_ 32G

8) BAT

9) F_PANEL

10) SPDIF_O

11) F_ AUDIO

12) F_USB30_1

13) F_USB1/F_USB2

14) COMA

15) LPT

16) TPM

17) THB_C

18) CLR_CMOS

- 12 -

3/4) CPU_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3 (Fan Headers)

 Themotherboardhasa4-pinCPUfanheader(CPU_FAN),two4-pin(SYS_FAN1/SYS_FAN2)anda3-pin

(SYS_FAN3)systemfanheaders.Mostfanheaderspossessafoolproofinsertiondesign.Whenconnecting

afancable,besuretoconnectitinthecorrectorientation(theblackconnectorwireisthegroundwire).

The speed control function requires the use of a fan with fan speed control design. For optimum heat

dissipation, it is recommended that a system fan be installed inside the chassis.

ATX_12V_2X4:

Pin No. Denition Pin No. Denition

1GND(Onlyfor2x4-pin12V) 5+12V(Onlyfor2x4-pin12V)

2GND(Onlyfor2x4-pin12V) 6+12V(Onlyfor2x4-pin12V)

3GND 7 +12V

4GND 8 +12V

DEBUG

PORT

G.QBOFM

131

2412

ATX

ATX:

Pin No. Denition Pin No. Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3GND 15 GND

4 +5V 16 PS_ON(softOn/Off)

5GND 17 GND

6 +5V 18 GND

7GND 19 GND

8 Power Good 20 NC

95VSB(standby+5V) 21 +5V

10 +12V 22 +5V

11 +12V (Only for 2x12-pin

ATX)

23 +5V(Onlyfor2x12-pinATX)

12 3.3V (Only for 2x12-pin

ATX)

24 GND(Onlyfor2x12-pinATX)

CPU_FAN:

Pin No. Denition

1GND

2 +12V

3 Sense

4 Speed Control

•Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating

may result in damage to the CPU or the system may hang.

•Thesefanheadersarenotcongurationjumperblocks.Donotplaceajumpercapontheheaders.

DEBUG

PORT

G.QBOFM

ATX_12V_2X4

5 8

1 4

CPU_FAN

DEBUG

PORT

G.QBOFM

SYS_FAN2

DEBUG

PORT

G.QBOFM

SYS_FAN1/2:

Pin No. Denition

1GND

2 Speed Control

3 Sense

4 VCC

SYS_FAN3:

Pin No. Denition

1GND

2 +12V

3 N/A

SYS_FAN3

SYS_FAN1

DEBUG

PORT

G.QBOFM

1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high

powerconsumptionbeused(500Worgreater).Ifapowersupplyisusedthatdoesnotprovidethe

required power, the result can lead to an unstable or unbootable system.

- 13 -

6) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA

1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel®ChipsetsupportsRAID0,

RAID1,RAID5,andRAID10.RefertoChapter3,"ConguringaRAIDSet,"forinstructionsonconguring

aRAIDarray.

To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS

Setup,""Peripherals\SATAConguration,"formoreinformation.

Pin No. Denition

1GND

2 TXP

3 TXN

4GND

5RXN

6RXP

7GND

5) SATA EXPRESS (SATA Express Connector)

The SATA Express connector supports a single SATA Express device.

7) M2F_32G (M.2 Socket 3 Connector)

 TheM.2connectorsupportsM.2SATASSDsandM.2PCIeSSDs.ItcansupportSATARAIDconguration

through the Intel®Chipset.PleasenotethatanM.2PCIeSSDcannotbeusedtocreateaRAIDsetwith

SATAdrive(s).RefertoChapter3,"ConguringaRAIDSet,"forinstructionsonconguringaRAIDarray.

Step 1:

Use a screw driver to unfasten the screw and nut from the motherboard. Locate the proper mounting hole

fortheM.2SSDtobeinstalledandthenscrewthenutrst.

Step 2:

SlidetheM.2SSDintotheconnectoratanangle.

Step 3:

PresstheM.2SSDdownandthensecureitwiththescrew.

OnthemotherboardtherearethreelengthadjustmentholesfortheM.2SSD.Selecttheproper

holefortheM.2SSDtobeinstalledandrefastenthescrewandnut.

FollowthestepsbelowtocorrectlyinstallanM.2SSDintheM.2connector.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3 4 5

 S3 BSSS U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

80F 60F 42F

SATA3 5 3 1

4 2 0

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3 4 5

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

- 14 -

8) BAT (Battery)

 Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,andtimeinformation)

intheCMOSwhenthecomputeristurnedoff.Replacethebatterywhenthebatteryvoltagedropstoalow

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1. Turn off your computer and unplug the power cord.

2. Gently remove the battery from the battery holder and wait for one minute. (Or

use a metal object like a screwdriver to touch the positive and negative terminals

ofthebatteryholder,makingthemshortfor5seconds.)

3. Replacethebattery.

4. Plug in the power cord and restart your computer.

•Always turn off your computer and unplug the power cord before replacing the battery.

•Replacethebatterywithanequivalentone.Dangerofexplosionifthebatteryisreplacedwith

an incorrect model.

•Contact the place of purchase or local dealer if you are not able to replace the battery by yourself

or uncertain about the battery model.

•Wheninstallingthebattery,notetheorientationofthepositiveside(+)andthenegativeside(-)

ofthebattery(thepositivesideshouldfaceup).

•Used batteries must be handled in accordance with local environmental regulations.

The PCI slots share bandwidth with the M2F_32G and SATA Express connectors. Whether the SATA

ExpressconnectorcanbeusedisdependentonthetypeofM.2SSDbeinginstalled.Pleasereferto

the table below:

SATA Express SATA3_0 SATA3_1 SATA3_2 SATA3_3 SATA3_4 SATA3_5

M.2SATASSDInstalled a a a a a a r(Note2)

M.2PCIex4SSD

Installed (Note1)

ra a a a a a

M.2PCIex2SSDInstalled

ra a a a a a

NoM.2SSDInstalled a a a a a a a

a: Available,r: Not Available

(Note1) The M.2 PCIex4SSDwillrunatx2speedifa PCI slot is populated.

(Note2) TheSATA3_5connectorwillbecomeunavailableifanM.2SATASSDisinstalled.

Connector

Type of

SSDInstalled

- 15 -

9) F_PANEL (Front Panel Header)

Connect the power switch, reset switch, speaker, and system status indicator on the chassis to this header

according to the pin assignments below. Note the positive and negative pins before connecting the cables.

10) SPDIF_O (S/PDIF Out Header)

 ThisheadersupportsdigitalS/PDIFOutandconnectsaS/PDIFdigitalaudiocable(providedby

expansioncards)fordigitalaudiooutputfromyourmotherboardtocertainexpansioncardslikegraphics

cardsandsoundcards.Forexample,somegraphicscardsmayrequireyoutouseaS/PDIFdigital

audio cable for digital audio output from your motherboard to your graphics card if you wish to connect

anHDMIdisplaytothegraphicscardandhavedigitalaudiooutputfromtheHDMIdisplayatthesame

time.ForinformationaboutconnectingtheS/PDIFdigitalaudiocable,carefullyreadthemanualforyour

expansion card.

Pin No. Denition

1SPDIFO

2GND

•PW(PowerSwitch,Red):

Connects to the power switch on the chassis front panel. You may

congure the way to turn off your system using thepower switch

(refer to Chapter 2, "BIOS Setup," "Power Management," for more

information).

•SPEAK (Speaker,Orange):

Connects to the speaker on the chassis front panel. The system reports

system startup status by issuing a beep code. One single short beep

will be heard if no problem is detected at system startup.

•PLED/PWR_LED (PowerLED,Yellow/Purple):

System Status LED

S0 On

S3/S4/S5 Off

Connects to the power status indicator

onthechassisfrontpanel.TheLEDison

whenthesystemisoperating.TheLEDis

off when the system is in S3/S4 sleep state

orpoweredoff(S5).

The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch,

powerLED,harddriveactivityLED,speakerandetc.Whenconnectingyourchassisfrontpanelmoduletothis

header, make sure the wire assignments and the pin assignments are matched correctly.

•HD (HardDriveActivityLED,Blue):

 ConnectstotheharddriveactivityLEDonthechassisfrontpanel.TheLEDisonwhentheharddriveis

reading or writing data.

•RES (ResetSwitch,Green):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the

computer freezes and fails to perform a normal restart.

•CI (ChassisIntrusionHeader,Gray):

Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has been

removed. This function requires a chassis with a chassis intrusion switch/sensor.

•NC (Orange):NoConnection.

PowerLED

DEBUG

PORT

G.QBOFM

CI-

CI+

PWR_LED-

PWR_LED+

PLED-

PW-

SPEAK+

SPEAK-

PLED+

PW+

PowerLED

HD-

RES+

HD+

RES-

HardDrive

ActivityLED

Reset

Switch Chassis Intrusion

Header

Power Switch Speaker

PWR_LED-

- 16 -

11) F_AUDIO (Front Panel Audio Header)

 ThefrontpanelaudioheadersupportsIntelHighDenitionaudio(HD)andAC'97audio.Youmayconnect

your chassis front panel audio module to this header. Make sure the wire assignments of the module

connector match the pin assignments of the motherboard header. Incorrect connection between the module

connector and the motherboard header will make the device unable to work or even damage it.

ForHDFrontPanelAudio: For AC'97 Front Panel Audio:

Pin No. Denition

1 MIC2_L

2GND

3MIC2_R

4-ACZ_DET

5LINE2_R

6 Sense

7FAUDIO_JD

8 No Pin

9 LINE2_L

10 Sense

Pin No. Denition

1 MIC

2GND

3 MIC Power

4 NC

5LineOut(R)

6 NC

7 NC

8 No Pin

9LineOut(L)

10 NC

•ThefrontpanelaudioheadersupportsHDaudiobydefault.

•Audio signals will be present on both of the front and back panel audio connections simultaneously.

•Some chassis provide a front panel audio module that has separated connectors on each wire instead of a

single plug. For information about connecting the front panel audio module that has different wire assignments,

please contact the chassis manufacturer.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3 4 5

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

9 1

10 2

12) F_USB30_1 (USB 3.0/2.0 Header)

 TheheaderconformstoUSB3.0/2.0specicationandcanprovidetwoUSBports.Forpurchasingthe

optional 3.5" front panel that provides two USB 3.0/2.0 ports, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 VBUS 11 D2+

2SSRX1- 12 D2-

3SSRX1+ 13 GND

4GND 14 SSTX2+

5 SSTX1- 15 SSTX2-

6 SSTX1+ 16 GND

7GND 17 SSRX2+

8D1- 18 SSRX2-

9D1+ 19 VBUS

10 NC 20 No Pin

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3 4 5

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

20 1

Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord from the power

outlet to prevent damage to the USB bracket.

- 17 -

14) COMA (Serial Port Header)

The COM header can provide one serial port via an optional COM port cable. For purchasing the optional

COM port cable, please contact the local dealer.

Pin No. Denition Pin No. Denition

1NDCD- 6NDSR-

2 NSIN 7 NRTS-

3 NSOUT 8 NCTS-

4NDTR- 9NRI-

5GND 10 No Pin

13) F_USB1/F_USB2 (USB 2.0/1.1 Headers)

 TheheadersconformtoUSB2.0/1.1specication.EachUSBheadercanprovidetwoUSBportsviaan

optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.

Pin No. Denition Pin No. Denition

1Power(5V) 6USBDY+

2Power(5V) 7GND

3USBDX- 8GND

4USBDY- 9 No Pin

5USBDX+ 10 NC

•DonotplugtheIEEE1394bracket(2x5-pin)cableintotheUSBheader.

•Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord from the power

outlet to prevent damage to the USB bracket.

DEBUG

PORT

G.QBOFM

15) LPT (Parallel Port Header)

The LPT header can provide one parallel port via an optional LPT port cable. For purchasing the optional

LPT port cable, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 STB- 14 GND

2AFD- 15 PD6

3PD0 16 GND

4ERR- 17 PD7

5PD1 18 GND

6 INIT- 19 ACK-

7PD2 20 GND

8 SLIN- 21 BUSY

9PD3 22 GND

10 GND 23 PE

11 PD4 24 No Pin

12 GND 25 SLCT

13 PD5 26 GND

DEBUG

PORT

G.QBOFM

- 18 -

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3 4 5

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

16) TPM (Trusted Platform Module Header)

 YoumayconnectaTPM(TrustedPlatformModule)tothisheader.

Pin No. Denition Pin No. Denition

1 LCLK 11 LAD0

2GND 12 GND

3LFRAME 13 NC

4 No Pin 14 NC

5LRESET 15 SB3V

6 NC 16 SERIRQ

7LAD3 17 GND

8LAD2 18 NC

9 VCC3 19 NC

10 LAD1 20 SUSCLK

Supports a Thunderbolt™ add-in card.

17) THB_C (Thunderbolt™ Add-in Card Connector)

This connector is for a GIGABYTE Thunderbolt™ add-in card.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3 4 5

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

1Pin No. Denition

1 GPIOA

2 GPIOB

3 N_-SLP_S3

4 N_-S4_S5

5GND

18) CLR_CMOS (Clear CMOS Jumper)

 UsethisjumpertocleartheBIOScongurationandresettheCMOSvaluestofactorydefaults.Toclear

the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.

•Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values.

•Aftersystemrestart,gotoBIOSSetuptoloadfactorydefaults(selectLoadOptimizedDefaults)ormanually

conguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOScongurations).

Open: Normal

Short: Clear CMOS Values

- 19 -

Chapter 2 BIOS Setup

•BecauseBIOSashingispotentiallyrisky,ifyoudonotencounterproblemsusingthecurrentversionofBIOS,

itisrecommendedthatyounotashtheBIOS.ToashtheBIOS,doitwithcaution.InadequateBIOSashing

may result in system malfunction.

•Itisrecommendedthatyounotalterthedefaultsettings(unlessyouneedto)topreventsysteminstabilityorother

unexpected results. Inadequately altering the settings may result in system's failure to boot. If this occurs, try to

cleartheCMOSvaluesandresettheboardtodefaultvalues.(Refertothe"LoadOptimizedDefaults"sectionin

thischapterorintroductionsofthebattery/clearCMOSjumperinChapter1forhowtocleartheCMOSvalues.)

BIOS(Basic Input and Output System) records hardware parameters of the systemin the CMOS on the

motherboard.ItsmajorfunctionsincludeconductingthePower-OnSelf-Test(POST)duringsystemstartup,

saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows

theusertomodifybasicsystemcongurationsettingsortoactivatecertainsystemfeatures.

When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to

keepthecongurationvaluesintheCMOS.

ToaccesstheBIOSSetupprogram,pressthe<Delete>keyduringthePOSTwhenthepoweristurnedon.

To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility.

•Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.

•@BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet

and updates the BIOS.

2-1 Startup Screen

The following startup Logo screen will appear when the computer boots.

(SampleBIOSVersion:F1a)

Function Keys

•When the system is not stable as usual, select the Load Optimized Defaults item to set your system to its defaults.

•The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.

OnthemainmenuoftheBIOSSetupprogram,pressarrowkeystomoveamongtheitemsandpress<Enter>

to accept or enter a sub-menu. Or you can use your mouse to select the item you want.

- 20 -

Page is loading ...

Gigabyte GA-X150-PLUS WS Owner's manual

Gigabyte GA-X150-PLUS WS Owner's manual

Gigabyte GA-X150-PLUS WS Owner's manual

Related papers

Other documents