Hytronik HDS2400 Dali Switch User manual

Type
User manual
Dimensions(mm)
1. Product description
2. Technical Specifications
Product type : DALI switch on/off
Operating voltage: 230/240VAC 50/60Hz
Rated load: 400W
Power consumption: ≤ 0.5W
DALI power: 2mA
Operating temperature: -20oC ~+50oC
EMC standard: EN55015
DALI standard: EN62386-101; 102; 205
DALI switch on/off
Input: DALI, L, N
Installation in box 60mm or stand alone installation.
DALI SWITCH ON/OFF HDS2400
Installation and Instruction Manual
This on/off DALI controlled switch is ideally suited for
retrofit where non-dimmable LED drivers, transformer or
fluorescent ballasts have been used.
23
L
DALI
N
DALI
L’
3. Wiring Diagram
L
L
L
N
N
DA
DA
DA
HDS2400
DA
DALI
Master
DALI
DALI
N
L
L
L
N
DA
DA
HDS2400
HDS2400-20161121-A1
1. 200 metres (total) max. for 1mm² CSA (Ta = 50 )
2. 300 metres (total) max. for 1.5mm² CSA (Ta = 50 )
Optional Accessory : Strain-relief clip
+=
77.1
23
77.1
Ø 55
48.5
51
34.5
HDS2400-20161121-A1
Note
The current version product might have a potential risk of compatibility issue with 3rd party DALI gateways or DALI
masters, Hytronik cannot guarantee it will be fully compatible with all the 3rd party DALI gateways or DALI masters.
Therefore, before a mass quantity orders has been placed, customers need to make a full compatibility test between
these products and their own 3rd party DALI gateways or DALI masters to make sure the product is working properly
and no such compatibility issue. Otherwise, the potential compatibility risk and responsibility shall be taken by the
customers themselves. Hytronik's Guarantee policy will not be applied to this.
  • Page 1 1
  • Page 2 2

Hytronik HDS2400 Dali Switch User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI