Page is loading ...
INSTRUCTION SHEET AND PARTS LIST
PARTS LIST — 501 DOLLY CART
ITEM# PART# QTY DESCRIPTION
1 501-363 1 FRAME
2 501-14 2 COTTER PIN, ¹/8"×1¹/4"
3 77-017 2 WASHER
4 501-367 1 AXLE
5 500-001 2 WHEEL
6 501-368 5 SPINDLE ROD
7 501-5 1 DECAL
8 406-3 10 SPRING CLIP
NOTE: Dolly Cart
should be used in a
horizontal position
for optimum stability
when dispensing wire
7
4
5
2,3
1
6
8
CAUTION
Only roll on a firm,
flat, smooth surface.
This manual is free of charge. All personnel who operate the Dolly Cart should
have a copy of this manual and read and understand its contents. To request a
copy, call or write to the address below. All information, specifications and
product designs may change due to design improvements or updates and are
subject to change without notice. Current Tools does not assume any liability
for damages resulting from misuse or incorrect application of its products.
Read and understand this material before
operating the Dolly Cart. Failure to
understand how to safely operate this Cart
may result in injury or property damage.
CURRENT TOOLS • P.O. BOX 17026 • GREENVILLE, SC 29606
800.230.5421 or 864-721-4230 • FAX 864-721-4232 • www.currenttools.com
CAPACITY:
6 – 2500' spools
up to 16" diameter
OR
15 – 500' spools
Model 501 Dolly Cart
spindle rod
storage holes
5/10
/
