Yellow Jacket OMNI™ Digital Vacuum Gauge Operating instructions

  • Hello! I've reviewed the Operating Instructions for the YELLOW JACKET OMNI Digital Vacuum Gauge. This document explains how to power the device on and off, change settings, and interpret the display, including the bar graph for vacuum level and select target value. I'm ready to answer your questions about this product.
  • How do I power on the vacuum gauge?
    How do I manually power off the vacuum gauge?
    How do I change a setting?
    How do I change the display background?
    What should I do for best sensor results?
MADE IN U.S.A. YELLOWJACK ET.C OM
OMNI
Digital
Vacuum Gauge
For best results, clean the sensor with mineral spirits.
Operating Instructions:
ON/OFF: Power on and off, select from four different auto-off timer settings.
DISPLAY: Select from several notification options. To change the
background, press and hold for three seconds to inverse LCD mode.
1. Press the ON/OFF button to power on the gauge.
2. To manually power off the gauge, press and hold the ON/OFF button until the screen displays the “YJ” logo.
3. To change a setting:
Tap the corresponding button to highlight the current setting.
• Continue to tap this button until the desired value is displayed.
• Press and hold this button to confirm the new setting. The h
ighlighting will disappear when the
setting has been confirmed.
*TARGET - Select from five
preset vacuum level targets.
*UNITS - Select from four
different vacuum units.
Auto-Off Timer
(in minutes)
Target Vacuum
Level
Notification
Icon
Vacuum
Unit
Vacuum Level (displays bar
graph until deep vacuum reached)
Omni
Vacuum Gauge
DISPLAY TARGET
UNITSON/OFF
©6/23 Ritchie Engineering Co.
Ritchie Engineering Company / YELLOW JACKET® 1-800-769-8370 custser[email protected]
/