1
Table of Contents
Preface ..............................................................................................................3
Communication Regulation ...............................................................................4
Important Safety Instructions ............................................................................5
Safety Information .............................................................................................7
System Integration ..........................................................................................10
Description of the Panel Button Functions ...................................................... 11
Description of Rear Panel Terminal Functions ................................................12
Description of the Tuner Rear Panel Terminal Functions ................................
13
Connection ......................................................................................................14
Description of Remote Control .......................................................................15
Function Adjustments and Settings .................................................................
17
1. Picture Settings .....................................................................................17
1-1 Adjust Picture ............................................................................................17
1-2 Adjust Contrast .........................................................................................
17
1-3 Adjust Brightness ......................................................................................
18
1-4 Adjust Color ..............................................................................................
18
1-5 Adjust Tint .................................................................................................
19
1-6 Adjust Sharpness ......................................................................................
19
1-7 Adjust Aspect ............................................................................................
20
1-8 All Reset ....................................................................................................
20
2. Enhance Settings ..................................................................................21
2-1 Auto Contrast ............................................................................................21
2-2 Color Enhance ..........................................................................................
21
2-3 OSD Position Settings ...............................................................................
22
2-4 Language Settings ....................................................................................
22
2-5 Backlight Settings ......................................................................................
23
2-6 Closed Caption ..........................................................................................23
2-7 Parental Control Settings ( V-Chip) ...........................................................24
MMPAA Rating Definition ...................................................................................
27
TV Guideline Rating system Definition ..............................................................
27
2
2
3. Position Settings ....................................................................................28
3-1 H Position Settings ...................................................................................28
3-2 All Reset ....................................................................................................
28
4. Color Temperature Settings ...................................................................29
5. Audio Settings ................................................................................................ 30
5-1 Bass Settings ............................................................................................30
5-2 Treble Settings ..........................................................................................
30
5-3 Balance Settings .......................................................................................
31
5-4 Surround Settings .....................................................................................
31
5-5 All Reset ..................................................................................................
32
6. System Settings ....................................................................................32
7. TV Settings ...........................................................................................
33
7-1 TV/CATV Settings .....................................................................................33
7-2 MTS Settings ............................................................................................
33
7-3 Add/Erase .................................................................................................
34
7-4 Auto Skip ...................................................................................................
34
7-5 Auto Program ............................................................................................
35
Specifications .................................................................................................36
Simple Troubleshooting ...................................................................................37
RGB Mode Frequency Specification Table ......................................................38
Accessories .....................................................................................................38
Other Accessories ...........................................................................................38
Appendix 1 - Back-Hanging Diagram ..............................................................39
Appendix 2 - Channel Frequency Table ..........................................................40
3
3
Preface
About This Manual
This manual is designed to make operating Device as easy as possible. Information in this
document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. Due to continuing system improvements, these changes will be
incorporated in newer editions.
Copyright
©
Copyright 2005
This document contains proprietary information protected by copyright. All rights are re
-
served. No part of this manual may be reproduced in any form by any mechanical, electronic
or other means, without written consent.
Trademarks
All trademarks and registered trademarks are the property of their respective owners.
4
4
Communication Regulation
FCC Compliance
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea
-
sonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected;
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause un
-
desired operation.
Canada Class B Statement
This Class B device meets all requirements of the Canadian interference-causing equipment
regulations. Cet appareil numérique de la Class B respecte toutes les exigencies du Régle
-
mensur le materiel brouilleur du Canada.
5
5
Important Safety Instructions
1. Read these instructions. All the safety and operating instructions should be read before
the product is operated.
2. Keep these Instructions. The safety and operating instructions should be retained for
future reference.
3. Heed all Warnings. All warnings on the product and in the operating instructions should
be adhered to.
4. Follow all Instructions. All operating and using instructions should be followed.
5. Cleaning. Unplug this product from the power outlet before cleaning. Clean only with
dry cloth.
6. Do not use this apparatus near water and moisture.
7. Ventilation. Do not block any ventilation openings. Install in accordance with the man
-
ufacturer’s instructions.
8. Do not install the product near any heat sources such as radiators, heat registers, stoves,
or other apparatuses (including amplifiers) that produce heat.
9. Grounding or Polarization. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the outlet.
10. Power-Cord Protection. Protect the power cord from being walked
on or pinched particularly at plugs, convenience receptacles, and points
that exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Only use the cart, stand, tripod, bracket, or table specified by the manufacturer, or pro
-
vided with the apparatus. When a cart is used, use caution when moving the cart/ap
-
paratus to avoid injury.
13. Unplug this apparatus during lightning storms or during long unused periods.
14. Outdoor Antenna Grounding. If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is grounded to provide protection against
voltage surges and built-up static charges.
PORTABLE CART WARNING
6
6
15. Power Lines. An outside antenna system should not be located in the vicinity of over-
head power lines, electric lights, power circuits, or other areas where the antenna can fall
into such power lines or circuits. When installing an outside antenna system, extreme
care should be taken to prevent contact with power lines or circuits as contact with them
might be fatal.
16. Overloading. Do not overload power outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
17. Servicing. Do not attempt to service this product yourself. Opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to a qualified
service personnel.
18. Damage Requiring Service. Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
If the power-supply cord or plug is damaged,
If liquid has been spilled, or objects have fallen into the product,
If the product has been exposed to rain or water,
If the product does not operate normally ,
If the product has been dropped or damaged in any way, and
If the product exhibits a distinct change in performance.
19. Wall or Ceiling Mounting. The product should be mounted to a wall or ceiling only by
manufacturer’s recommendation.
20. The AC/DC power adapter, model (GFP 121U-121O), is only exclusively designed and
tested for the tuner box. Other source of AC/DC adapters are not recommended.
Antenna
Lead-in
Wire
Antenna
Discharge
Unit
Electric
Service
Equirment
Ground
Clamp
Grounding
Conductors
Power service grounding
Electrode system
GROUND CLAMPS
7
7
Safety Information
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or
television reception. However, there is no guarantee that interference will not occur in a par
-
ticular installation. If this equipment does cause interference to radio and television recep
-
tion, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit from that to which the receiver is con-
nected.
Caution
To prevent fire, shock hazard, or interference, only use the recommended accessories. To
prevent electric shock, do not use the plug with an extension cord, receptacle, or other outlet
unless the blades can be fully inserted to prevent blade exposure. To reduce the risk of elec
-
tric shock, do not remove the unit cover or back. There are no serviceable parts inside. Refer
servicing to a qualified personnel only.
This symbol is intended to alert the
user to the presence of uninsulated
dangerous voltage within the prod-
uct’s enclosure that may be of suffi
-
cient magnitude to constitute risk of
fire or electric shock.
This symbol is intended to alert the
user to the presence of important op
-
erating and maintence instructions
in the literature accompanying this
product.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
8
8
◆ Disconnect the monitor from the power outlet
during thunderstorms or when nobody is at
home for several days.
◆ Do not open the monitor chassis to avoid
risk of electric shocks.Refer all repairs and
maintenance to qualified personnel.
◆ Do not place the monitor in a closed area
such as a bookshelf or wall cabinet. Make
sure the monitor is placed in a well-venti-
lated area.
◆ To avoid fire or electrocution, do not ex-
pose the monitor to rain or humidity.
◆ If liquid or solid objects are dropped into
the monitor, stop using the monitor and
contact a qualified personnel immediately
for service.
◆ The openings on the rear panel of the moni-
tor should not be blocked by newspaper,
table cloth or curtains that will affect its
ventilation.
Contingency Measures
If there are signs of abnormality (such as odor, smoke) during use, disconnect the power cable
immediately and notify our service site.
Safety Precautions
1. The internal part of the monitor contains dangerously high voltage levels, do not let water
seep into it nor expose it to humidity.Never attempt to open the back cover and perform
repairs on the monitor yourself to avoid electrocution or fire hazard.
Lightning symbol Exclamation Point
Indicates high voltage Indicates repair of critical parts
2. Please read the following instructions carefully before use:
9
9
30 cm
10 cm
Correct Positioning
◆ When your monitor is placed on a cabinet, small room or rack, make sure that it is well-ventilated.The
following diagrams show the “minimum distance and space” required for setting up your monitor.
◆ Avoid placing this monitor in high tempera-
ture, humid or dusty areas.
◆ Use a soft, dry cloth to clean this monitor.
If necessary, use neutral detergent to wipe
the monitor.
◆ Place the monitor on a steady surface. Do
not let children climb on the monitor.
◆ Do not use the same power outlet for several
electrical appliances as this may damage the
power outlet and cause danger of fire.
◆ This monitor is larger in size and two per-
sons are needed for installation to avoid risk
of dropping.
◆ To avoid damage caused by the falling of
the monitor, do not place it on a movable
rack with wheels.
10
10
VCR
TV GAME
DVD/VCD
Multimedia LCD PC
CAMERA
DBS TUNER
DBS
TUNER
This tuner is integrated with a high picture quality multimedia display and has the
multiple functions of a complete TV and video center.
System Integration
11
11
1
4
5
7
8
2
3
Buttons located on the panel
6
9
(1) Main power switch: Press this switch before use to set the system in standby
mode. In this mode, the LED indicator is red.Turn off this switch if you will not use
the monitor for a long time.
(2) LED indicators: Standby -> red, On -> green
(3) Infrared connection: If you are using a remote control, point in this direction to send
signals and control the monitor functions.
(4) POWER: Press this button to turn the multimedia display on or off.
(5) SOURCE: Press this key to display the video source selection menu. If you have a
DVD player connected to the component input , then select “COMPONENT” from
source menu.
(6) - PROG + : Press this button to move up and down to select a submenu in the Main
Menu.
(7) - VOL + : Press this button to increase or decrease the sound volume.If the Main
Menu is open, this button also acts as the left-right button.
(8) OK : Press this button to confirm the selection of a Main Menu adjustment item or
certain sub-item functions.
Description of the Panel Button Functions
12
12
RS-232 VGA SYSTEM
AUDIO
L
R
RS-232 VGA SYSTEM
AUDIO
L
R
Terminals located on the lower back
LCD rear panel
1
4
3
2
(1) VGA Input: This is the 15-pin mini D-Sub input connector that is used to connect to the
analog RGB output signal connector on the PC.
(2) AUDIO R/L: This group of terminals is for audio input.The white terminal is for left audio
channel input while the red terminal is for right audio channel input.
(3) SYSTEM: This is the system interface connector.
(4) RS-232: This is the RS-232 serial port.
Description of Rear Panel Terminal Functions
13
13
1
3
4
5
6
7
2
Terminals located at the
back of the machine
(1) ANT : This is the antenna input terminal.Connect to ordinary TV antenna and CATV antenna.
(2) VIDEO : This group of terminals is for video input.The yellow terminal is for composite video input,
the white terminal is for left audio channel input while the red terminal is for right audio channel
input.
(3) S : This group of terminals is for S-video input.If you have S-video output equipment, you can get
better picture quality display through this S-video input terminal.The white terminal is for left audio
channel input while the red terminal is for right audio channel input.
(4) COMPONENT : This group of terminals is for Component input.Auto detects the component video
signal for HDTV 720p, 1080i and SDTV 480p or ordinary DVD 480i to provide high picture quality
video display.
(5) AUDIO OUT : This group of terminals is for audio ouput.The white terminal is for left audio channel
input while the red terminal is for right audio channel input.(Note: Connecting the Audio Out of this
TV tuner to another amplifier will void the volume control and mute functions.)
(6) VGA OUT : This group of terminals is the video output for connecting to the high picture quality
multimedia display.
(7) RS 232 : This group of terminals is the RS-232 for connecting to the high picture quality multimedia
display.
Description of the Tuner Rear Panel Terminal Functions
14
14
Audio channel/
Video channel
Cable
S-Video
Left-right sound channels
Video transmission
S-Video
cable
Video: : : Yellow
Audio, left : White
Audio, right : Red
Video tuner terminal
System interface cable
LCD terminal
Audio transmission
step 1
step 2
step 3
step 4
A
B
C
step 5
RS-232 VGA SYSTEM
AUDIO
L
R
Ant/Cable
a. Do not connect the power cord and the AC/DC power adapter until you complete all con-
nections, otherwise an extremely small power leakage from the antenna or other sockets
to the grounding will occur.
b. Follow steps 1, 2 and 3 to connect the necessary cable from the Tuner to the back of the Display
unit as shown in Fig 1. All these 3 cables need to be connected at all time for the TV to work.
c. Select the source you want to use and connect it to the Tuner accordingly.
d. Connect the Coxial cable from your Antenna or Cable box to the “ANT” port for watching TV
Channel.
e. Most VCR, DVD are connected to the video port as shown above in A, B & C. Yellow (Video
signal), Red(Right Audio), White(Left Audio).
f. Double check all the cable connection. Make sure they are plugged in tightly.
g. Plug in the 12v DC power plug to the Tuner and to the Power adapter to the power outlet as
shown in step 4.
h. Plug in the power cord to the back of the Multimedia Display unit and the power outlet as shown
in step 5.
Connection
15
15
(1)
(4)
(6)
(3)
(10)
(11)
(8)
(16)
(9)
(17)
(20)
(15)
(19)
(7)
(2)
(14)
(18)
(5)
(13)
(12)
Description of the Remote Control
16
16
(1) POWER : Press this button to turn
the multimedia display on or off.
(2) SOURCE : Press this button to switch
to TV -> Video -> S-Video -> Compo
-
nent modes in this order.
(3) Menu : Press this button to enter or exit
the Main Menu.
(4) MUTE : Press this button to mute the
sound, then press it again or press
the Volume +/- button to resume the
original sound volume.
(5) PROG +/- : Press this button to move
to the next or previous channel.
(6) VOL+/- : Press this button to adjust the
sound volume.
(7) : Press this button to move up
and select a submenu in the Main
Menu.(this is a single direction but
-
ton)
(8) : Press this button to move down
and select a submenu in the Main
Menu.(this is a single direction but
-
ton)
(9) : Press this button to move right and
select an adjustment item in the Main
Menu to adjust the control functions
and parameters of the selected sub-
item.(this is a single direction button)
(10)
: Press this button to move left and
select an adjustment item in the Main
Menu to adjust the control functions
and parameters of the selected sub-
item.(this is a single direction button)
(11) OK: Press this button to confirm the
selection of a Main Menu adjustment
item or certain sub-item functions.
(12) 0~9: Press any numeric button from 0
~ 9 to select a channel between 01 and
99. If you select a channel that is out of
this range, the TV returns to its original
channel.
(13) 100+ : This is the 100+ channel select
button.To select Channel 125, first
press the 100+ button before pressing
the number buttons 2 and 5 to skip to
this channel.
(14) RECALL : Press this button to recall the
signal source before switching. Recall
also for returning to previous channel.
(15) DISPLAY : Press this button to display
the current signal source. The display
time is about 10 seconds.
(16) ASPECT : Press this button to select
4:3/16:9/Wide screen aspect ratio.
(17) SLEEP : Press this button to set the
count-down time for turning off the
tuner. Press once for a 10-minute
count-down time, press a second time
to add another 10 minutes. The maxi
-
mum time is 60 minutes.The order is
OFF -> 10 minutes -> 20 minutes -> ...
-> 60 minutes -> OFF (cycle).
(18) MTS : Press this button to switch be-
tween Main and SAP.
(19) PICTURE : Press this button to select
User, Vivid or Standard options.
(20)SOUND EFFECT : Press this button to
select Pseudo, Stereo or Off.
17
17
1. Picture Settings
(1) Press the (MENU) button on the Panel or
on the Remote Control to enter the Main
Menu and press the (
) button on the
Remote Control or (-VOL+) on the panel
to select “PICTURE” settings.
(2) Press the (OK) button to enter “PITURE”
settings.
(3) Press the (
) button on the Remote
Control or (-PROG+) on the panel to se
-
lect the “PICTURE” option.
(4) Press the (
) button on the Remote
Control or (-VOL+) on the panel to adjust
the picture quality. You have the User,
Vivid or Standard options to choose
from.
(5) To continue setting other “PICTURE”
sub-items, press the (
) button on the
Remote Control or (-PROG+) on the panel
to select the desired option. After setting
is complete, press the (MENU) button to
return to the Main Menu.
Note 1: The Contrast, Brightness, Color and
Tint for the PICTURE Settings will dif
-
fer according to the Picture option you
selected.Each Picture option has its own
independent settings.
Note 2: The Brightness, Color and Tint are fixed
and cannot be adjusted if you select
Vivid or Standard.You can adjust the
Brightness, Color and Tint as desired if
you select User.
1-1 Adjust Picture
(1) Press the (MENU) button on the Panel or
on the Remote Control to enter the Main
Menu and press the (
) button on the
Remote Control or (-VOL+) on the panel
to select the “PICTURE” settings.
(2) Press the OK button to enter “PICTURE”
settings.
(3) Press the (
) button on the Remote
Control or (-PROG+) on the panel to select
the “CONTRAST” option.
(4) Press the (
) button on the Remote
Control or (-VOL+) on the panel to adjust
the Contrast.
(5) To continue setting other “PICTURE”
sub-items, press the (
) button on the
Remote Control or (-PROG+) on the panel
to select the desired option. After setting
is complete, press the (MENU) button to
return to the Main Menu.
1-2 Adjust Contrast
Note: If the value adjusted is too large or
out of range, the screen will show
signs of defocusing.
Function Adjustment and Settings
18
18
(1) Press the (MENU) button on the Panel
or on the Remote Control to enter the
Main Menu and press the (
) but-
ton on the Remote Control or (-VOL+)
on the panel to select the “PICTURE”
settings.
(2) Press the (OK) button to enter “PIC
-
TURE” settings.
(3) Press the (
) button on the Remote
Control or (-PROG+) on the panel to
select the “BRIGHTNESS” option.
(4) Press the (
) button on the Remote
Control or (-VOL+) on the panel to
adjust the Brightness.
(5) To continue setting other “PICTURE”
sub-items, press the (
) button on
the Remote Control or (-PROG+) on
the panel to select the desired option.
After setting is complete, press the
(MENU) button to return to the Main
Menu.
1-3 Adjust Brightness
(1) Press the (MENU) button on the Panel or
on the Remote Control to enter the Main
Menu and press the (
) button on the
Remote Control or (-VOL+) on the panel
to select the “PICTURE” settings.
(2) Press the (OK) button to enter “PIC
-
TURE” settings.
(3) Press the (
) button on the Remote
Control or (-PROG+) on the panel to
select the “COLOR” option.
(4) Press the (
) button on the Remote
Control or (-VOL+) on the panel to adjust
the color.
(5) To continue setting other “PICTURE”
sub-items, press the (
) button on
the Remote Control or (-PROG+) on the
panel to select the desired option. After
setting is complete, press the (MENU)
button to return to the Main Menu.
1-4 Adjust Color
19
19
(1) Press the (MENU) button on the Panel or
on the Remote Control to enter the Main
Menu and press the (
) button on the
Remote Control or (-VOL+) on the panel
to select the “PICTURE” settings.
(2) Press the (OK) button to enter “PIC
-
TURE” settings.
(3) Press the (
) button on the Remote
Control or (-PROG+) on the panel to
select the “TINT” option.
(4) Press the (
) button on the Remote
Control or (-VOL+) on the panel to adjust
the tint.
(5) To continue setting other “PICTURE”
sub-items, press the (
) button on
the Remote Control or (-PROG+) on the
panel to select the desired option. After
setting is complete, press the (MENU)
button to return to the Main Menu.
1-5 Adjust Tint
(1) Press the ( MENU) button on the Panel
or on the Remote Control to enter the
Main Menu and press the (
) button
on the Remote Control or (-VOL+) on
the panel to select the “PICTURE” set
-
tings.
(2) Press the (OK) button to enter “PIC
-
TURE” settings.
(3) Press the (
) button on the Remote
Control or (-PROG+) on the panel to
select the “SHARPNESS” option.
(4) Press the (
) button on the Remote
Control or (-VOL+) on the panel to adjust
the sharpness.
(5) To continue setting other “PICTURE”
sub-items, press the (
) button on
the Remote Control or (-PROG+) on the
panel to select the desired option. After
setting is complete, press the (MENU)
button to return to the Main Menu.
1-6 Adjust Sharpness
20
20
(1) Press the (MENU) button to enter the
Main Menu and press the (
) button
on the Remote Control or (-VOL+) on the
panel to select the “PICTURE” settings.
(2) Press the (OK) button to enter “PIC
-
TURE” settings.
(3) Press the (
) button on the Remote
Control or (-PROG+) on the panel to
select the “ASPECT” option.
(4) Press the (
) button on the Remote
Control or (-VOL+) on the panel to adjust
the aspect ratio. You can select from
these two modes 4: 3 and 16: 9.
(5) To continue setting other “PICTURE”
sub-items, press the (
) button on
the Remote Control or (-PROG+) on the
panel to select the desired option. After
setting is complete, press the (MENU)
button to return to the Main Menu.
1-7 Adjust Aspect
(1) Press the (MENU) button on the Panel or
on the Remote Control to enter the Main
Menu and press the (
) button on the
Remote Control or (-VOL+) on the panel
to select the “PICTURE” settings.
(2) Press the (OK) button to enter “PIC
-
TURE” settings.
(3) Press the (
) button on the Remote
Control or (-PROG+) on the panel to
select the “ALL RESET” option.
(4) Press the (OK) button to restore the
default settings of all options under “PIC
-
TURE” Settings.
(5) To continue setting other “PICTURE”
sub-items, press the (
) button on
the Remote Control or (-PROG+) on the
panel to select the desired option. After
setting is complete, press the (MENU)
button to return to the Main Menu.
1-8 All Reset
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
