Etac Swift Mobile Tilt Assembly Instruction

Type
Assembly Instruction

Etac Swift Mobile Tilt

Etac Swift Mobile Tilt is a versatile and feature-rich mobility device designed to provide greater independence and mobility for users with limited mobility. It features:

  • Adjustable seat height and tilt angle for optimal positioning and comfort
  • Easy-to-use hand control for effortless operation
  • Compact design for easy storage and transportation
  • Durable construction for reliable performance
  • Ergonomic design for enhanced user comfort

With its advanced capabilities, Etac Swift Mobile Tilt empowers users to:

  • Easily navigate different environments, both indoors and outdoors

Etac Swift Mobile Tilt

Etac Swift Mobile Tilt is a versatile and feature-rich mobility device designed to provide greater independence and mobility for users with limited mobility. It features:

  • Adjustable seat height and tilt angle for optimal positioning and comfort
  • Easy-to-use hand control for effortless operation
  • Compact design for easy storage and transportation
  • Durable construction for reliable performance
  • Ergonomic design for enhanced user comfort

With its advanced capabilities, Etac Swift Mobile Tilt empowers users to:

  • Easily navigate different environments, both indoors and outdoors
78696A 19-05-17
8400 6194, 8400 6193, 8400 6192
Kit styrbox + handkontroll
Kit control unit + handset
Kit Steuereinheit + Handbedienung
Monteringsanvisning/Assembly instructions/Montageanweisung
Remote
Acc 1
Acc 2
x1
Etac Supply Center AB
Långgatan 12
SE-334 24 Anderstorp
www.etac.com
Acc 1 Acc 2
Remote
C4...
C4...
C4...
C4...
C4...
C3...
C3...
C3...
C3...
C4...
Kalibrering av stol / Calibrating the chair / Kalibrierung des Stuhls
1 2 3
1. Adjust the chair to its lowest position in the manual height adjustment.
2. Insert the battery in the control box. The battery beeps for about 4-5 seconds, which means that it has contact and is correctly positioned.
3. Press the up and down button on the handset. Do so until the actuators stop and then release the button. Press and hold the up and down button again
(approx. 10 seconds) until the actuators move a short distance and then stop. Now release the up and down button. The LED on the control box flashes
green in short, quick bursts during this step. A short beep and a longer solid green flashing LED confirm a successful calibration.
1. Justera stolen till sitt nedersta läge i den manuella höjdjusteringen.
2. Montera batteriet i kontrollboxen. Batteriet piper i ca 4-5 sek vilket betyder att det har kontakt och är korrekt monterat.
3. Tryck in sänkknappen på handkontrollen. Gör detta tills ställdonen stannar, släpp då knappen.
Tryck in sänkknappen ytterligare en gång och håll den intryckt (ca 10 sekunder) tills ställdonen rör sig en kort sträcka och sedan stannar, släpp nu sänk-
knappen.
Under detta förfarande blinkar LED lampan på kontrollboxen med grönt ljus med korta och snabba blinkningar.
Bekräftelse på lyckad kalibrering sker via ett kort ”pip” och ett längre fast grönt blinkande på LED lampan.
1. Bringen Sie den Stuhl in die niedrigste Position des manuellen Einstellungsspektrums.
2. Legen Sie die Batterie in das Steuergerät ein. Die Batterie gibt für ca. 4 bis 5 Sekunden einen Piepton aus, d. h. es besteht ein Kontakt und sie ist korrekt
eingelegt.
3. Die Aufwärts- und Abwärtstaste an der Handbedienung drücken. Gedrückt halten, bis die Antriebe stoppen, und dann die Taste loslassen. Die Aufwärts-
und Abwärtstaste nochmals drücken und gedrückt halten (etwa 10 Sekunden), bis sich die Antriebe kurz weiterbewegen und dann stoppen. Jetzt die
Aufwärts- und Abwärtstaste loslassen. Die grüne LED am Steuergerät blinkt dabei kurz und schnell. Ein kurzer Piepton und ein längeres, konstantes
Aufleuchten der grünen LED bestätigt die erfolgreiche Kalibrierung.
sv
de
en
  • Page 1 1
  • Page 2 2

Etac Swift Mobile Tilt Assembly Instruction

Type
Assembly Instruction

Etac Swift Mobile Tilt

Etac Swift Mobile Tilt is a versatile and feature-rich mobility device designed to provide greater independence and mobility for users with limited mobility. It features:

  • Adjustable seat height and tilt angle for optimal positioning and comfort
  • Easy-to-use hand control for effortless operation
  • Compact design for easy storage and transportation
  • Durable construction for reliable performance
  • Ergonomic design for enhanced user comfort

With its advanced capabilities, Etac Swift Mobile Tilt empowers users to:

  • Easily navigate different environments, both indoors and outdoors

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages