2. Computers & electronics
  3. Print & Scan
  4. Printing supplies
  5. Print heads
  6. Monarch
  7. TC9414MQR

Monarch TC9414MQR User manual

  • Hello! I am an AI chatbot trained to assist you with the Monarch TC9414MQR User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TC9414MQR Rev. AB 3/03 2003 Monarch Marking Systems, Inc. All rights reserved.
Maintenance Quick Reference
You must perform certain maintenance procedures for your printer to function properly:
Clean the printhead
Clean the peel bar
Clean the platen roller
Clean the outside of the printer.
Cleaning the Printhead
Follow these instructions to clean the printhead.
Clean the printhead every time you load a new roll of
paper labels into the printer.
1. Turn the printer off (O).
2. Press the cover release buttons (on both sides of the
printer) towards the front of the printer. Lift open the
cover.
3. Gently rub the cleaning pen (#114226) across the
printhead.
Cleaning the Peel Bar
Follow these instructions to clean the peel bar.
Clean the peel bar every time you load a new roll of
paper supply into the printer.
1. Turn the printer off (O).
2. Press the cover release buttons (on both sides of the
printer) towards the front of the printer. Lift open the
cover.
3. Gently rub the cleaning pen (#114226) across the
peel bar.
IF YOU NEED HELP OR MORE PAPER LABELS, PLEASE CALL 1-888-666-9414.
IF YOU NEED HELP OR MORE PAPER LABELS, PLEASE CALL 1-888-666-9414.
Cleaning the Platen Roller
Follow these instructions to clean the platen roller
Clean the platen roller every time you load a new roll of
paper labels into the printer.
1. Turn the printer off (O).
2. Press the cover release buttons (on both sides of the
printer) towards the front of the printer. Lift open the
cover.
3. Gently rub the cleaning pen (#114226) across the
platen roller.
Cleaning the Outside of the Printer
Follow these instructions to clean the outside of the
printer.
Clean the outside of the printer when you see grease
build up.
1. Turn the printer off (O).
2. Dampen a soft cloth with water and gently clean the
outside of the printer.
Setting the Date/Time/Hot Hold Time
Scan the following barcodes to set the Date, Time, or Hot Hold Time.
Date Time Hot Hold Time Dry Hot Time
If you need to change the date or time use the top row buttons on the bump pad.
Cheese Supreme Pepperoni
Meat Lovers
Date
month day adds a year subtracts a year
Time
hours minutes am/pm
Caution
Do not clean the inside of
the printer with a damp
cloth.
Do not clean while the
printer is on.
/