NEC Express5800/340Hb-R N8800-047F User manual

Category
System management software
Type
User manual

This manual is also suitable for

N8800-047F/073F
NEC Express5800/340Hb-R
User's Guide
1st Edition
3-2005
856-125126-901-A
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER
The information disclosed in this document, including all designs and related materials, is the
valuable property of NEC Corporation (NEC) and /or its licensors. NEC and/or its licensors, as
appropriate, reserve all patent, copyright and other proprietary rights to this document, including all
design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are
expressly granted to others.
The NEC product(s) discussed in this document are warranted in accordance with the terms of the
Warranty Statement accompanying each product. However, actual performance of each such
product is dependent upon factors such as system configuration, customer data, and operator control.
Since implementation by customers of each product may vary, the suitability of specific product
configurations and applications must be determined by the customer and is not warranted by NEC.
To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without prior
written approval of NEC is prohibited.
First Printing, March 2005
Copyright 2005
NEC Corporation
7-1 Shiba 5-Chome, Minato-Ku
Tokyo 108-8001, Japan
All Rights Reserved
Printed in Japan
Keep this User's Guide handy for quick reference when necessary.
SAFETY INDICATIONS
To use NEC Express5800 Series safely, follow the instructions in this User's Guide.
This guide explains components that pose a danger, types of dangers, and actions taken to prevent
them; such components are labeled warning.
This guide and warning labels use "WARNING" and "CAUTION" to indicate a danger depending on
the degree. These terms are defined as follows:
WARNING
Indicates a danger that could lead to a death or serious injury.
CAUTION
Indicates a danger that could lead to a burn, other injuries or damage to
physical assets.
This guide uses the following three types of symbols to give indications and precautions against a
danger. They are defined as follows:
Indicates that there is a risk of danger. Each image symbolizes a particular type of
danger. (Attention)
Indicates what you must not do. Each image symbolizes a particular type of
prohibition. (Prohibited actions)
Indicates what you must do. Each image symbolizes a particular type of action
necessary to avoid a danger. (Mandatory actions)
(Example)
Symbol to draw attention
Term indicating a degree of danger
CAUTION
High temperature.
Immediately after the power-off, system components such as hard disk drive
are very hot. Wait the server to cool down completely before adding/removing
some component.
Symbol indicating a prohibited
action (may not always be
indicated)
Description of a danger
SYMBOLS USED IN THIS USER'S GUIDE AND WARNING LABELS
Attention
Indicates a risk of an electric shock.
Indicates a risk of an injury due to heat.
Indicates a risk of catching your fingers.
Indicates a risk of a fire or smoke.
Indicates a general precaution or warning that is not defined herein.
Indicates a risk of losing eyesight due to laser beam.
Indicates a risk of an injury or damage to physical assets due to hazardous material.
Prohibited actions
Indicates a general prohibition that is not defined herein.
Do not disassemble, repair, or modify the equipment. There is a risk of an electric
shock or fire.
Mandatory actions
Unplug the server. There is a risk of an electric shock or fire.
Indicates a general action to take that is not defined herein. Make sure to follow the
instructions.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numériqeu de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
CE Statement
Warning: This is a Class A product. In residential environment, this product may cause radio
interference, in which case the user may be required to take adequate measures (EN55022).
NOTE: This product provides resistance against hardware faults with its redundant hardware
modules. However, this does not mean complete fault-tolerance is assured. For example,
there is a risk of system down when:
– A fatal fault occurs in software.
– Both modules within a redundant hardware pair break down.
– A fatal fault occurs in a non-redundant component, such as the clock generator circuitry
or the interconnect backplane.
– The entire system is cut off from AC power.
Trademarks
NEC EXPRESSBUILDER, NEC ESMPRO, and NEC Express5800/ft series are trademarks of NEC
Corporation. Stratus is a registered trademark of Stratus Technologies Bermuda Ltd. Microsoft, Windows,
Windows Server, Windows NT, and MS-DOS are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries. Intel and Pentium are registered trademarks of Intel
Corporation. Xeon is a trademark of Intel Corporation in the United States. AT is a registered trademark of
International Business Machines Corporation in the United States and other countries. Adobe, the Adobe logo,
Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated. Datalight is a registered
trademark of Datalight, Inc. ROM-DOS is a trademark of Datalight, Inc. DLT and DLTtape are trademarks of
Quantum Corporation in the United States. QLogic and its logo are trademarks of QLogic Corporation in the
United States. Fast!UTIL is a trademark of QLogic Corporation in the United States.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of
their respective trademark owners.
Microsoft Windows Server 2003 Standard Edition operating system and Microsoft Windows Server 2003
Enterprise Edition operating system are called Windows Server for short. Microsoft Windows 2000 Server
operating system, Microsoft Windows 2000 Advanced Server operating system and Microsoft Windows 2000
Professional operating system are called Windows 2000 for short. Microsoft Windows NT Server network
operating system version 3.51/4.0 and Microsoft Windows NT Workstation operating system version 3.51/4.0
are called Windows NT for short. Microsoft Windows Millennium Edition Operating System is called
Windows Me for short. Microsoft Windows 98 operating system is called Windows 98 for short. Microsoft
Windows 95 operating system is called Windows 95 for short.
Names used with sample applications are all fictitious. They are unrelated to any existing product names,
names of organizations, or individual names.
To prevent voltage sag:
This product may be affected by voltage sag caused due to lightning. To prevent voltage sag, you
are recommended to use an AC uninterruptible power supply (UPS) unit.
Notes:
(1) No part of this manual may be reproduced in any form without prior written permission of NEC
Corporation.
(2) The contents of this manual are subject to change without prior notice.
(3) The contents of this manual shall not be copied or altered without prior written permission of NEC
Corporation.
(4) All efforts have been made to ensure the accuracy of all information in this manual. If you find any part
unclear, incorrect, or omitted in this manual, contact the sales agent where you purchased this product.
(5) NEC assumes no liability arising from the use of this product, nor any liability for incidental or
consequential damage arising from the use of this manual regardless of (4) above.
i
PREFACE
Welcome to the NEC Express5800/ft series.
NEC Express5800/ft series is a "fault-tolerant (ft)" server focusing on "high reliability" in terms of
fault-tolerance, in addition to "high performance," "scalability," and "general versatility" provided
by NEC Express5800 series. In the event of trouble, its dual configuration will allow the system to
instantaneously isolate the failed parts to assure non-stop running; operation will be moved
smoothly from one module to the other, minimizing damage to it. You can use this NEC
Express5800/ft series in a mission-critical system where high availability is required. By the use of
Windows operating system, it also provides outstanding openness for general-purpose applications,
etc.
To make the best use of these features, read this User's Guide thoroughly to understand how to
operate NEC Express5800/ft series.
ii
ABOUT THIS USER'S GUIDE
This User's Guide helps a user to properly setup and use the product.
Consult this guide to ensure safety as well as to cope with trouble during a system setup and daily
operation.
Keep this manual handy.
This User's Guide is intended for users who have a good knowledge on the basic use of Windows
operating systems and general I/O devices such as a keyboard and mouse.
How to Use This User's Guide
This guide consists of eight chapters and appendices. To help you find a solution quickly, the guide
contains the following information:
For descriptions on setting up this product, see the separate volume "User’s Guide (Setup)".
Read "Precautions for Use" first.
Before going on to main chapters, be sure to read "Precautions for Use." These precautions are very
important for using the product safely.
Chapter 1 Precautions for Use
This chapter describes precautions necessary to use the product safely and properly. Be sure to
read this chapter before using the product. It also provides information on user support. It will be
helpful when you need maintenance service, support, etc.
Chapter 2 General Description
This chapter describes what you should know about the product: its component names, functions,
operating procedures as well as handling of devices and other parts.
Chapter 3 Windows Setup and Operation
This chapter describes setup and operation specific to the product when it is on Windows.
Chapter 4 System Configuration
This chapter describes how to make settings of built-in basic input/output system. It also describes
factory-shipped parameters.
Chapter 5 Installing and Using Utilities
This chapter describes features and operating procedures of a standard utility "NEC
EXPRESSBUILDER." It also describes procedures to install and operate various software
programs contained in its CD-ROM.
Chapter 6 Maintenance
This chapter describes maintenance procedures and use of maintenance tools. If you need to
move the product for maintenance purposes, follow the steps provided in this chapter.
Chapter 7 Troubleshooting
If the product does not work properly, see this chapter before deciding that it is a breakdown.
Chapter 8 Option
This chapter describes options available for the server, procedures and precautions for replacing
the failed devices.
Appendix A Specifications
This appendix lists specifications of the product.
Appendix B IRQ and I/O Port Address
This appendix lists factory-assigned IRQ and I/O port address.
iii
Additional symbols
The following symbols are used throughout this User's Guide in addition to the caution symbols
describe at the beginning.
IMPORTANT:
Important points or instructions to keep in mind when using the
server or software
CHECK:
Something you need to make sure when using the server of
software
TIPS:
Helpful information, something useful to know
Accessories
This product is shipped with various accessories. See the attached list to make sure everything is
included and check the individual items. If some component is missing or damaged, contact your
sales agent.
î‚„ Keep the accessories in a safe place. You will need them when you perform setup,
addition of options, or replacement of failed components.
î‚„ NEC EXPRESSBUILDER, an accessory of the server, is packaged in a paper envelope.
For the components in the package, see the packing list of the NEC EXPRESSBUILDER
contained in the paper envelope. If you lose the NEC EXPRESSBUILDER CD-ROM and
desire to purchase a new one, contact your sales representative.
î‚„ Be sure to fill out and mail the software registration card that is attached to your operating
system.
î‚„ Make backup copies of included floppy disks, if any. Keep the original disks as the master
disks; use these copies in operation.
î‚„ Improper use of an included floppy disk or CD-ROM may alter your system environment.
If you find something unclear, stop using them and contact your sales agent.
iv
CONTENTS
PREFACE...........................................................................................................................i
ABOUT THIS USER'S GUIDE........................................................................................ii
CONTENTS .....................................................................................................................iv
Chapter 1 Precautions for Use .......................................................................1-1
WARNING LABELS.....................................................................................................1-2
Server Chassis.............................................................................................................1-2
CPU Module...............................................................................................................1-4
PCI Module.................................................................................................................1-5
Expansion PCI Module...............................................................................................1-7
PRECAUTIONS FOR SAFETY....................................................................................1-9
General .......................................................................................................................1-9
Use of Power Supply and Power Cord.....................................................................1-11
Installation, Relocation, Storage and Connection.....................................................1-12
Cleaning and Handling of Internal Devices..............................................................1-13
During Operation......................................................................................................1-14
Rack-mount Model...................................................................................................1-15
For Proper Operation................................................................................................1-17
TRANSFER TO THIRD PARTY.................................................................................1-19
DISPOSAL OF EQUIPMENT AND CONSUMABLES.............................................1-20
IF SYSTEM TROUBLE IS SUSPECTED...................................................................1-21
ABOUT REPAIR PARTS.............................................................................................1-21
ABOUT OUR WEB SERVICE ...................................................................................1-21
Chapter 2 General Description ....................................................................... 2-1
STANDARD FEATURES..............................................................................................2-2
HOW THE OPERATING SYSTEM SEES THE CPU MODULES..............................2-6
How CPU modules appear on Device Manager.........................................................2-6
How CPU modules appear on Task Manager.............................................................2-6
NAMES AND FUNCTIONS OF COMPONENTS .......................................................2-7
Front View (with Front Bezel Removed) ...................................................................2-7
Rear View ...................................................................................................................2-9
CPU Module.............................................................................................................2-11
PCI Module...............................................................................................................2-12
CD- ROM Drive.......................................................................................................2-13
Expansion PCI Module.............................................................................................2-14
Chassis Board Layout...............................................................................................2-15
LEDs.........................................................................................................................2-16
BASIC OPERATION...................................................................................................2-28
Installing/Removing the Front Bezel........................................................................2-28
Power ON.................................................................................................................2-30
Power OFF................................................................................................................2-31
v
Power-On Self Test (POST) ..................................................................................... 2-32
Floppy Disk Drive....................................................................................................2-35
CD-ROM Drive........................................................................................................ 2-38
Chapter 3 Windows Setup and Operation......................................................3-1
DISK OPERATIONS..................................................................................................... 3-2
Disks Operations Using Disk Management ............................................................... 3-3
Disk Operations Using the RDR (Rapid Disk Resync) Function............................. 3-15
Replacing Failed Hard Disk Drives.......................................................................... 3-25
CHANGE DRIVE LETTER........................................................................................ 3-33
DUAL LAN CONFIGURATION ................................................................................ 3-34
Overview.................................................................................................................. 3-34
Configuring dual LAN ............................................................................................. 3-34
Removing dual LAN................................................................................................ 3-37
CHECK THE DUPLICATING OPERATION OF MODULES...................................3-40
Evaluate Startup and Stop of PCI Modules.............................................................. 3-40
Evaluate Start and Stop of CPU Modules ................................................................ 3-43
Evaluate Start and Stop of Expansion PCI Modules................................................ 3-45
NEC Express5800/ft series SERVICE PROGRAM CONFIGURATION ................... 3-47
Chapter 4 System Configuration.....................................................................4-1
SYSTEM BIOS ~ SETUP ~........................................................................................... 4-2
Starting SETUP Utility............................................................................................... 4-3
Description of On-Screen Items and Key Usage........................................................ 4-4
Menu and Parameter Descriptions ............................................................................. 4-5
SCSI BIOS ∼ Fast!UTIL ∼........................................................................................... 4-21
Setting List for Optional SCSI Device..................................................................... 4-31
RESET AND FORCED SHUTDOWN........................................................................ 4-32
Resetting the Server.................................................................................................. 4-32
Forced Shutdown...................................................................................................... 4-32
Clear CMOS / Password (Configuring Motherboard Jumpers) ............................... 4-33
Chapter 5 Installing and Using Utilities..........................................................5-1
NEC EXPRESSBUILDER............................................................................................. 5-2
Start Menu.................................................................................................................. 5-2
NEC EXPRESSBUILDER Top Menu....................................................................... 5-4
Master Control Menu ................................................................................................. 5-7
NEC ESMPRO Agent AND Manager............................................................................ 5-8
Overview.................................................................................................................... 5-8
NEC ESMPRO Agent .............................................................................................. 5-16
NEC ESMPRO Manager.......................................................................................... 5-25
Maintenance of NEC Express5800/ft series............................................................. 5-46
vi
Chapter 6 Maintenance.................................................................................... 6-1
DAILY MAINTENANCE..............................................................................................6-2
Checking Alert............................................................................................................6-2
Checking STATUS LEDs ...........................................................................................6-3
Making Backup Copies ..............................................................................................6-3
Cleaning......................................................................................................................6-4
SYSTEM DIAGNOSTICS (CONSUMER)...................................................................6-7
Test Items....................................................................................................................6-7
Startup and Exit of System Diagnosis (Consumer) ....................................................6-7
OFF-LINE MAINTENANCE UTILITY .......................................................................6-9
RELOCATING/STORING THE NEC Express5800/ft series......................................6-10
Chapter 7 Troubleshooting ............................................................................. 7-1
TO LOCATE THE ERRORS .........................................................................................7-2
ERROR MESSAGES.....................................................................................................7-3
Error Messages by LED Indication ............................................................................7-3
Windows Server 2003, Enterprise Edition Error Messages........................................7-4
Server Management Application Error Message........................................................7-5
SOLVING PROBLEMS.................................................................................................7-6
Problems with NEC Express5800/ft series.................................................................7-6
Problems with NEC EXPRESSBUILDER...............................................................7-19
Problems with Master Control Menu .......................................................................7-20
Problems with NEC ESMPRO.................................................................................7-21
COLLECTION OF TROUBLE LOGS ........................................................................7-29
Collection of Event Logs..........................................................................................7-30
Collection of Configuration Information..................................................................7-31
Collection of Diagnostic Information by Dr. Watson...............................................7-31
COLLECTION OF THE MEMORY DUMP...............................................................7-32
Chapter 8 Option.............................................................................................. 8-1
SAFETY PRECAUTIONS.............................................................................................8-2
ANTI-STATIC MEASURES..........................................................................................8-3
PREPARING YOUR SYSTEM FOR UPGRADE.........................................................8-4
OPTIONS .......................................................................................................................8-5
3.5-INCH HARD DISK DRIVE ....................................................................................8-6
Installing 3.5-inch Hard Disk Drive ...........................................................................8-8
Removing 3.5-inch Hard Disk Drive........................................................................8-11
Replacing 3.5-inch Hard Disk Drive........................................................................8-12
PROCESSOR ...............................................................................................................8-13
DIMM...........................................................................................................................8-14
PCI BOARD.................................................................................................................8-15
SETUP OF OPTIONAL PCI BOARD.........................................................................8-16
N8804-001P1 100BASE-TX Adapter Set ................................................................8-17
N8803-031F Fibre Channel Controller.....................................................................8-19
N8104-84 1000BASE-SX Adapter...........................................................................8-23
vii
N8104-103 1000BASE-T Adapter ........................................................................... 8-25
Supplement............................................................................................................... 8-27
Appendix A Specifications..............................................................................A-1
Appendix B IRQ and I/O Port Address...........................................................B-1
Interrupt Request........................................................................................................B-1
I/O Port Address.........................................................................................................B-2
viii
(This page is intentionally left blank.)
Chapter 1
Precautions for Use
This chapter includes information necessary for proper and safe operation of the server.
1-2 Precautions for Use
WARNING LABELS
Warning labels are placed in certain parts of the system so that the user stays alert to possible risks
(Do not remove or damage these labels).
If some label is missing, about to peel off, or illegible, contact your sales agent.
Server Chassis
The figures below show locations of the labels on the server chassis.
Label A
Label D
Label B
Label C
Precautions for Use 1-3
Label A
Label B
Label C
Label D
1-4 Precautions for Use
CPU Module
The figures below show locations of the labels on CPU module:
Label B
Label C
Label A
Label A
Label B Label C
Precautions for Use 1-5
PCI Module
The figures below show locations of the labels on PCI module:
External View
Label B
Label A
Internal View
Label C
1-6 Precautions for Use
Label A
Label B
Label C
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312

NEC Express5800/340Hb-R N8800-047F User manual

Category
System management software
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI