Cooper Lighting QCM506SP User manual

Category
Flat panel ceiling mounts
Type
User manual
DESCRIPTION
Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
7.25”
12.00”
13.00”
8.18”
4.63”
Ceiling
Cut-Out
3.641”dia.
4.63”
Ceiling thickness must be specified
A ...Housing
Housing and plaster frame: 18 gauge CRS
with flat black powder coated internal
finish. Plasterframe opening collar is built
to accommodate a pre-specified ceiling
thickness.
B ...System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture.
Vent holes in housing provide cooler
operation.
C ...Electrical
Integral j-box and low voltage (12V)
transformer . 120V input, 12V output.
Junction box is U.L. listed for through
branch wiring. Includes five 1/2 trade size
knockouts (six knockouts when magnetic
xfmr. is specified)
D ...Lamp
12V MR16 50 watts max. (not included)
Internal rotation ring with locking
adjustment. Provides 360º rotation of trim
and secures original trim position after
relamping. Not available for ceilings
greater than 1” thick. “POSI-GRIP” bi-pin
lamp socket forrm, mechanical lamp
connection.
E ...Mounting
Hanger Bars and Butterfly Brackets
included for residential and commercial
applications respectively.
Ceiling Cut-Out: 3.641” dia.
MINI
QUIET CEILING
TRIMLESS
QCM506SP
New Construction
Housing for
Round Trim
Special Ceiling
Materials
(non-drywall ceilings)
FOR 12V MR16 50 watts max.
ORDERING INFORMATION
Housing
QCM506SP =
Mini Quiet Ceiling
New Construction Housing
for non-drywall ceilings
for Round Trim
w/Integral Transformer
Voltage
120
=
120 volts primary
277
=
277 volts primary
New construction special ceiling housing for Mini Quiet Ceiling small
aperture round trimless fixtures. (QCM5001, QCM5002, QCM5003,
QCM5004).
For new construction non-I.C applications in non-drywall ceilings
constructed of special materials such as wood, marble, etc.... Insulation
must be kept 3” from all sides and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349- 3031
Transformer
ELC
=
Electronic
MAG
=
Magnetic
QCM506SP
Cut-out in ceiling material must be
sized perfectly to the diameter of the
plasterframe collar for trimless effect.
Ceiling Thickness
Specify exact thickness in inches.
1/8” Increments.
Examples: 0.500”, 0.625”, 0.750”, 0.875”
Ceiling Material
rev. 091806
__
__
  • Page 1 1

Cooper Lighting QCM506SP User manual

Category
Flat panel ceiling mounts
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI