Dacor MOH User manual

Category
Ovens
Type
User manual

This manual is also suitable for

PLANNING
GUIDE
Web: http://www.dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
27, 30” Wide, Double,
Wall Ovens
EO, PO, MOV & MOH
L65346 rev D
“C”
1“ (25mm)
Clear to Top
of Drawer for
Heat Exhaust
“B”
“A”
Alternate
Electrical
Location
Recommended
Electrical
Location
1“ (25mm) Min.
2
33
1
CUTOUT DIMENSIONS
NOTES:
1. 24” (610mm) minimum interior cabinet depth.
Back of cabinet may need to be removed.
2. 3/4” (19mm) support platform (flush with cutout).
3. 1/8” (3mm) minimum clearance from appliance to
adjacent cabinet doors/drawers.
1.7
1/2101905
Models “A” Cutout Height “B” Cutout Width “C” Min. Cabinet Width Oven Overlays
27”
50 9/16” (1284mm)
25 1/2” (648mm) 27” (686mm)
3/4” (19mm) Each Side; 15/16” (24mm) Top;
1/16” (1mm) Bottom
30” 28 1/2” (724mm) 30” (762mm)
PLANNING
GUIDE
Web: http://www.dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
27, 30” Wide, Double,
Wall Ovens
EO, PO, MOV & MOH
L65346 rev B
Dedicated Circuit
Required
Total
Connected Load
Approximate
Shipping Weight
240VAC,
4-wire,
60Hz, 40A
(Breaker)
8.6kW (37A) 415 lbs.
OVEN HANDLE DIMENSIONS
OVERALL DIMENSIONS
1.8
EPICURE™
MILLENNIA™
PREFERENCE™
3 11/16” (94mm)
1 1/4”
(32mm)
1 1/4”
(32mm)
1 1/4”
(32mm)
3 5/16” (84mm) 2 5/16” (59mm)
1 1/4”
(32mm)
7 3/8” (187mm)
2 5/16” (75mm)
66”
(1676mm)
Flexible Conduit
6 3/8” (162mm)
23 3/8”
(594mm)
51 3/32”
(1298mm)
“A”
Detail A
1 9/16”
(40mm)
1 13/16”
(46mm)
7/16”
(11mm)
DETAIL A
2/2101905
22 3/4”
(578mm)
Oven cabinet
Back of
control panel/
oven door
TOP VIEW with DOOR OPEN
Models “A” Oven Width
27” 27” (686mm)
30” 30” (672mm)
  • Page 1 1
  • Page 2 2

Dacor MOH User manual

Category
Ovens
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI