3
FTP-627USL431/631
SPECIFICATIONS
*+5˚Cto+40˚Cprintingdensityassurancerance.
Item Specication
PartNumber FTP-627USL431/435 FTP-627USL631/635
Interface ConformstoUSB/Serial
Power
supply
For print head
24VDCaveragecurrent,0.5A(0.9Apeak)
(printratio:12.5%,printspeed:100mm/sec.)
Formotor 24VDC±5%,0.8Amaximum
Forcutter 24VDC±5%,1.1Amaximum
Forlogic 5VDC±5%,0.2Amaximum
Dimensions Mechnismandboard 101x114x139mm(WxDxH)
Weight Mechnismandboard Approximately600g
Life
Head
Pulseresistance:100millionpulses/dot(underoutstandard
conditions);Abrasionresistance:papertravelingdistance
50km(printratio:12.5%orless) 100km(printratio:12.5%orless)
Cutter 500,000cuts(20cuts/minute) 1,000,000cuts
Platen 5,000(open/close)
MTBF
Mechanism 3,000hours
Circuitboard 500,000hours
Operating
environment
Operatingtemperature* 0˚Cto50˚C
Operatinghumidity 20to85%RH(nocondensation)
Storagetemperature* -20˚CTO+60˚C(papernotincluded)
Storagehumidity 5to90%RH(nocondensation)
Detection
function
Headtemperature
detection
Detectedbythermistor
Paperout/mark
detection
Detectedbyphoto-interuptor
Platen release Detectedbyslidingswitch
Recommendedthermalsensitive
paper
High Sensitive Paper TF50KS-E4(Nipponpaper)
Standard Paper TF60KS(Nipponpaper),
FTP-020PU001(58mm),
PD105R(Ojipaper),
FTP-020P0701(58mm)
MediumLifePaper TF60KS-F1,FTP-020P0102
(58mm),PD170R(Ojipaper),
P220VBB-1(Mitsubishipaper)
LongLifePaper PD160R-N(Ojipaper),AFB-235
(Mitsubishipaper),TP50KJ-
R(Nipponpaper),HA220AA
(Nipponpaper)