2. Computers & electronics
  3. TVs & monitors
  4. LCD TVs
  5. ElectrIQ
  6. eiq-49UHDT2SM
eiq-49UHDT2SM

ElectrIQ eiq-49UHDT2SM, eiq-55UHDT2SM, eiq-65UHDT2SM, eiq-75UHDT2SM User manual

  • Hello! I am an AI chatbot trained to assist you with the ElectrIQ eiq-49UHDT2SM User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
49/55/65/75 inch UHD LED TV
eiq-49UHDT2SM
eiq-55UHDT2SM
eiq-65UHDT2SM
eiq-75UHDT2SM
1
CONTENTS
Safety Informaon……………………………………………………………… 2
What is included…..……………………………………………………………. 4
TV Stand Installaon/Removal……………………………………………. 5
Geng Started…………………………………………………………………… 7
Connecng to External Devices…………………………………………..11
Remote Control………………………………………………………………….13
Sengs………………………………………………………………………………15
Smart TV………………………………………………………………………………25
Specificaons……………………………………………………………………..31
Support & Disposal…………………………………………………………….34
SAFETY INFORMATION
•
Read these instrucons – All the safety and operang instrucons should be read
before this product is operated.
•
Keep these instrucons – The safety and operang instrucons should be
retained for future reference.
•
Heed all warnings – All warnings on the appliance and in the operang
instrucons should be adhered to.
•
Follow all instrucons – All operang and usage instrucons should be followed.
• Do not use this equipment near water – The appliance should not be used near
water or moisture e.g. in a wet basement or near a swimming pool.
•
Clean only with a dry cloth. Do not use solvents or petroleum based fluids.
•
Do not block any venlaon openings.
•
Do not install near any heat sources such as radiators, stoves or other apparat
us
(including am plifiers) that produce heat.
•
Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
•
Protect the power cord from being walkedon or pinched, parcularly ahe plug
and at the point where they exit from the appliance.
•
Only use at tachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer or sold with the apparatus. When a cart or stand is used, use
cauon when moving it to avoid any injuries or damage from it pping over.
•
Unplug the apparatus during lightning storms or when unused for long periods of
me.
• Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus or it
has been exposed to rain or moisture, it does not operate normally or has been
dropped.
•
Please keep the unin a well -venlated environment.
•
The TV set should only be connected to a mains power supply with 220-240V
50Hz
•
To prevent overload, do not share the same power supply socket with too many
other electronic components.
•
Do not place any connecng wires where they may be stepped on or tripped
over.
•
Do not place heavy items on the cable as this may cause damage.
• Hold the main plug, not the wires, when removing from a socket.
2
• Pull the plug out immediately and seek professional help if the main plug or cable
is damaged, liquid has spilt onto the set, if accidentally exposed to water or
moisture, if anything accidentally penetrates the venlaon slots or if the set
does not work normally.
•
Do not remove the safety covers. There are no user serviceable parts inside.
Trying to service the unit yourselfis dangerous and may invalidate the product’s
warranty. Only qualified personnel should service this apparatus.
•
To avoid baery leakage, remove exhausted baeries from the remote control
when not in use for a long period.
•
Do not block venlaon slots on the back cover. The TV can be placed in a
cabinet but ensure at least
5cm (2”) clearance all around.
• Do not tap or shake the TV screen, this may damage internal components.
•
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping or
splashing and objects filled with liquids, such as vases, shall not be placed on the
apparatus.
•
WARNING: The wall plug sockes used as a disconnecon device and should
remain readily accessible.
•
WARNING: The baeries shall not be exposed to excessive heat such as direct
sunlight or fire.
This warning sign is to
warn of dangerous voltage
inside the product.
CAUTION: To reduce the risk of
electric shock, DO NOT remove the
cover (or back). No user serviceable
parts inside. Refer servicing to
qualified service personnel.
This warning sign is to alert
you of important
instrucons accompanying
the product.
This equipment is a Class II or double insulated electrical appliance.
It does not require a grounded connecon.
AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE
USER’S HEARING.
3
WHAT IS INCLUDED
TV Set
Remote Control (2 xAAA Baeries)
49”/55”/65”Base Stand
75”Base Stand
6Screws
User’s Manual
V+
V-
P-
P+
REPEAT
SMART
SUBTITLE
MUTEPOWER
SOURCE
P.MODE
S.MODE
P.SIZE
JUMP
MENU INFO
EXIT
OK
SLEEP
FAV.CH
AUDIO
PVR.LIST TIME SHIFT DTV/RADIO
REC
GUIDETEXTHOME
BACK
PG+
PG-
SEARCHMOUSE
DELETE
MENU
4
TV STAND INSTALLATION/REMOVAL
Four mounng holes
(size M6 screw)
400mm
200mm
Screws(3
Screws(3)
4*18BMH 4*18BMH
Four mounng holes
(size M6 screw)
400mm
200mm
Screws(3
Screws(3)
4*23 BMH 4*23 BMH
49 Inch (eiq-49UHDT2SM)
55 Inch (eiq-55UHDT2SM)
5
Four mounng holes
(size M6 screw)
400mm
400mm
Screws(3
Screws(3)
4*20 BMH 4*20 BMH
Four mounng holes
(size M8 screw)
600mm
400mm
Screws(3
Screws(3)
4*25 BMH 4*25 BMH
65 Inch (eiq-65UHDT2SM)
75 Inch (eiq-75UHDT2SM)
6
GETTING STARTED
BUTTON FUNCTIONS
1. POWER Buon:To turn ON/OFF the
TV.
2. SOURCE Buon: To select the input
source.
3. MENU Buon: To enter menu seng
page.
4. VOL-: To decrease the volume level.
5. VOL+: To increase the volume level.
6. CH-: To select previous channel.
7. CH+: To select next channel.
8. Remote Control Sensor.
9. Power Indicator: In standby mode the
WALL MOUNTING
•
The TV is provided with mounng holes for a VESA approved wall mounng
bracket (not supplied).
•
The VESA mounng paern is
49 Inch- 400x200mm and the size of the screws is 4 x M6x10(not supplied).
55 Inch- 400x200mm and the size of the screws is 4 x M6x12(not supplied).
65 Inch- 400x400mm and the size of the screws is 4 x M6x20(not supplied).
65 Inch- 600x400mm and the size of the screws is 4 x M8x20(not supplied).
• Do not use screws longer than 10/12/20mm or damage will occur to the internal
components.
NOTE: As the TV set is considered heavy, please consult with a professional
wall mounn staller to perform the installaon.
indicator light will display red,when
switching on the unit the indicator
light will display green.
49 Inch (eiq-49UHDT2SM)
7
8
75 Inch eiq-49UHDT2SM
1.
IR RECEIVER: Receives infrared signals
from the remote control.
2. INDICATOR LED: Status indicator
3. POWER: press the buon in
SOURCE: push forward and hold for
1-2 seconds.
MENU: pull back and hold for 1-2 seconds
In User menu move to le / right or push
forward / pull back as appropriate
Vol +/- move to right or le.
CH+
VOL+
MENU
SOURCE
POWER
1. POWER Buon:To turn ON/OFF the
TV.
2. SOURCE Buon: To select the input
source.
3. MENU Buon: To enter menu seng
page.
4. VOL-: To decrease the volume level.
5. VOL+: To increase the volume level.
6. CH-: To select previous channel.
7. CH+: To select next channel.
8. Remote Control Sensor.
9. Power Indicator: In standby mode the
indicator light will display red,when
switching on the unit the indicator
light will display green.
55/65 Inch (eiq-55/65UHDT2SM)
9
INPUT/OUTPUTTERMINALS
4. YPbPr: Connect to the YPbPr video output terminal of the DVD player.
1. Back USB x2. Provides access to SMART TV. Connect smart remotes,keyboards,
gaming accessories or usb flash drive Side USB x 2 can be used for DTV recording,
meshi or as a media player file.
Note: only connect low power USB flash drives or externally powered hard
drives to the 3x USB ports as they only provide 0.5 Amps power.
2. RF: Antenna connecon.
7. Coaxial Coaxial output.
3. HDMI x3.
8. RJ45.
3
456718
6. AUDIO IN L/R: Stereo audio input
5. VIDEO: Video input.
HDMI3 RF
5V 0.5A
USB1/USB2
RJ45
5V 0.5A
USB1/USB2
COAXIAL
L RAUDIO VIDEO/Y Pr
Pb HDMI1 HDMI2
49/55 Inch
65/75 Inch
10
INPUT/OUTPUTTERMINALS
5. YPbPr: Connect to the YPbPr video output terminal of the DVD player.
1. Back USB x2. Provides access to SMART TV. Connect smart remotes,keyboards,
gaming accessories or usb flash drive Side USB x 1 can be used for DTV recording,
meshi or as a media player file.
Note: only connect low power USB flash drives or externally powered hard
drives to the 4 x USB ports as they only provide 0.5 Amps power.
2. RF: Antenna connecon.
8. Coaxial Coaxial output.
3. HDMI x3.
4. Headphone
9. RJ45.
3
4567819
7. AUDIO IN L/R: Stereo audio input
6. VIDEO: Video input.
HDMI3 RF
5V 0.5A
USB
RJ45
5V 0.5A
USB1/USB2
COAXIAL L RAUDIO VIDEO/Y
Pb Pr
Headphone
HDMI1 HDMI2
CONNECTING TO EXTERNAL DEVICES
HDMI
cable
cable TV
company
VHF/UHF
antenna
cable receiver/satellite box
RF Coaxial
cable
Component
cable
Composite
cable
HDMI3 RF
5V 0.5A
USB1/USB2
RJ45
5V 0.5A
USB1/USB2
COAXIAL
L RAUDIO VIDEO/Y Pr
Pb HDMI1 HDMI2
49/55 Inch
11
65/75 Inch
12
CONNECTING TO EXTERNAL DEVICES
HDMI
cable
cable TV
company
VHF/UHF
antenna
cable receiver/satellite box
RF Coaxial
cable
Component
cable
Composite
cable
HDMI3 RF
5V 0.5A
USB
RJ45
5V 0.5A
USB1/USB2
COAXIAL
L RAUDIO VIDEO/Y Pr
Pb HDMI1 HDMI2
Headphone
V+
V-
P-
P+
REPEAT
SMART
SUBTITLE
MUTEPOWER SOURCE
P.MODE S.MODE P.SIZE
JUMP
MENU INFO
EXIT
OK
SLEEP
FAV.CH
AUDIO
PVR.LIST TIME SHIFT DTV/RADIO
REC
GUIDETEXTHOME
BACK
PG+
PG-
SEARCHMOUSE
DELETE
MENU
REMOVE CONTROL
1. POWER: Turn on the TV/Standby.
2. MUTE: Mute or restore the sound.
3. SOURCE: Press to change the signal source.
4. S. MODE: Seng audio opons.
5. P. MODE: Output image mode selecon.
6. AUDIO: Switch the audio channel when DVD or
mulmedia playing. I/II: In the TV mode, press this
buon to select the stereo size.
7. P. SIZE: Press to select the different picture size.
8. NUMBER KEYS: Change the channel.
9. FAV. CH: Show the list of favourite channels.
10. SLEEP: Auto Power Off Timer.
11. JUMP: Return to the previous channel tuned.
12. MENU: Show Menu.
13. EXIT: Exit the Menu.
14. INFO: Show informaon about the current program
15. NAVIGATION KEYS (Up
, Down, Le, Right and OK): To
move in the menus and confirm sengs.
16. V+/V-: Increase / decrease volume.
17. P+/P-: Next / previous channel.
18. BACK: key navigaon.
19. MENU: contextual menu and opons.
20. MOUSE: Turns on / off the mouse emulaon.
Use the arrows to navigate and OK to select. To return
to keys navigaon press mouse key again.
21. SEARCH: funcon enable quick text search.
Press the appropriate colour to direct
access funcons in TELETEXT or EPG OSD mode.
22. TIME SHIFT: In DTV mode, press TIME SHIFT buon to start the delay
funcon, press the
buon to start playing delay program, press the
buon to terminate the delay funcon.
Reveals hidden informaon such as the answers to a quiz in TELETEXT Mode.
23. PVR LIST: IN DTV mode, displays the executed PVR LIST.
Displays the main index in TELETEXT mode.
1
4
5
8
12
16
19
22
18
23
26
27
30
31
34
35
2
3
6
7
9
10
11
13
14
17
21
24
20
25
28
29
32
33
36
37
15
13
24. REPEAT: Repeat mode.
Displays the top, boom or all of the page.
25. DTV/RADIO: In DTV mode, press DTV/RADIO buon to enter DTV or RADIO
mode.
Freeze a mul-page selecon on TELETEXT mode.
26. Stop Playback.
27. REC: In DTV mode, press REC buon to start recording, press buon
stop recording.
28. Smart : Provides quick access to the smart TV funcons.
29.
Play/Pause.
30.
Fast Forward playback.
31.
Rewind playback.
32.
Previous file or chapter.
33.
Nexile or chapter.
34. TEXT: Turn on and off the Teletext funcon.
35. funcon returns to the main smart tv menu.
36. SUBTITLE: Select subtle of media video file (requires the support of disk or
file).
37. GUIDE: Show the Electronic Program Guide (EPG).
BATTERY INSTALLATION
1. Open the baery cover.
2. Insert 2 AAA baeries in the baery compartment, matching the polaries
correctly.
3. Replace the baery cover.
14
Sengs
Inial Setup
1. Connecng your TV on the poweroutlet;
2. Press the POWER buon on the remote to turn on the TV in green for the LED light.
CAUTION:Always disconnect the TV from the power outlet when the TV will
not be used for a long period of me. The POWER buon on the front panel is only
used for switching the TV into standby, it does not disconnect the device from the
main voltage. To completely disconnect the main voltage, please remove the power
plug from the socket.
3. Press the key//◄ / ►and following the picture as bellow to operate the subject.
NOTE:
The picture is for reference only.
Pay aenon:Press the/ /◄ / ►buon to use and operaon and press OK to finish.
15
Basic Operaons
1.Press the MEMU buon on the remote control, the on-screen menu will appear
on the screen.
2.Use the ◄ / ► buons to select your main menu opon.
3. Use the / buons to highlight your color temp opon, use the ◄ / ► buons
to change the seng.
4.And press the MENU to exit the menu.
Main Menu Operaon
Channel Menu
Press MENU buon to display the main menu.
Aer finishing your adjustment, Press MENU buon to return back to the previous menu.
Press SOURCE buon to display the
input source list, Press / or
SOURCE buon to select the input
source you want to, Press OK buon
to enter the input source, Press EXIT
buon to quit.
Select Input Source
16
Tuning Steup
ATV Manual Tuning
DTV Manual Tuning
17
Programme Edit
Signal Informaon
Aer finishing your adjustment, Press MENU buon to return back to the previous menu.
The three colored key are the shortcut key for programming the channels.
First press / buon to highlight the channel you want to delete or move or skip, then:
Press the Red buon to delete the channel.
Press the Yellow buon to skip the select channel.
(Your TV set will skip the channel automacally when using CH+/- to view the channels.)
Press the Blue buon to to set the channel to moving state. then press / to move it
to the posion you want to put,and press Blue buon again to done the move operaon.
Only available when there is signal under DTV.
18
Aer finishing your adjustment, Press MENU buon to return back to the previous menu.
Press MENU buon to display the main menu.
Picture Menu
Sound Menu
Press MENU buon to display the main menu.
Sound Mode
Press / buon to select Sound Mode,
then press Enter buon to enter sub-menu.
Press/ buon to select.
Aer finishing your adjustment, Press MENU buon to return back to the previous menu.
NOTE:
Balance: This item can adjust the speaker ’s output, it enables you to listen to best at your
posion.
AVL: This item uses for reducing the difference between channel and program’s
volume automacally.
It made the overall water to be even. This funcon will also reduce the fluctuaon of the sound.
19
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/