Page is loading ...
Item # __________________________
C.S.I. Section 11420
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
A2780
ISO9001
Vulcan-Hart Co.
F-32568 (04-02)
STANDS
STACK STAND FOR VPX3 AND VPX5 STEAMERS
STANDS
Stack Stand For VPX3 and VPX5 Steamers
ACCESSORY CODES
■■ STAND_PXSTCK 24" wide
STANDARD FEATURES
■ Stainless steel frame, flanged feet on front and rear.
■ Complete with mounting hardware for Vulcan VPX steamers.
■ One year limited parts and labor warranty.
SPECIFICATIONS:
VPX counter steamer equipment stand. Stainless steel frame,
flanged feet on front and rear. Complete with mounting hardware
for Vulcan VPX steamers.
Exterior dimensions: 24
1
/2"w x 25"d.
Printed On Recycled Paper
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-32568 (04-02)
STANDS
STACK STAND FOR VPX3 AND VPX5 STEAMERS
V VPX vent extension.
EQUIPMENT CLEARANCE: Rear: 6" Sides 0"
NOTE:
• Dimensions which locate the above connections have a tolerance of +
or -3" (+ or -77 mm).
• Installation of backflow preventers, vacuum breakers and other specific
code requirements is the responsibility of the owner and installer. It is
the responsibility of the owner and installer to comply with local codes.
• Plastic drains are not recommended due to inherent limited tempera-
tures of the plastic. Boiler purge temperatures may exceed 180°F. The
installer may be required to provide means to reduce boiler purge water
temperatures to be that of the condensate temperture of 140°F or
below.
• This appliance is manufactured for commercial installation only and
is not intended for home use.
• See VPX Series spec sheet for electrical connections.
/