Approx APPPCI100V2 User manual

Approx
Brand
Approx
Model
APPPCI100V2
Category
Networking cards
Type
User manual

The Approx APPPCI100V2 is a versatile and reliable network adapter designed to enhance your computer's connectivity options. With its compliance to Ethernet IEEE802.3 100Base-TX and 10Base-T industry standards, it delivers stable and high-speed network connections. The 32-bit PCI local bus master architecture ensures efficient data transfer, while the auto-sensing 10/100Mbps speed capability allows for seamless network integration.

The Approx APPPCI100V2 is a versatile and reliable network adapter designed to enhance your computer's connectivity options. With its compliance to Ethernet IEEE802.3 100Base-TX and 10Base-T industry standards, it delivers stable and high-speed network connections. The 32-bit PCI local bus master architecture ensures efficient data transfer, while the auto-sensing 10/100Mbps speed capability allows for seamless network integration.

Page is loading ...
Page is loading ...
1. FEATURES
Key features
• Complies with the Ethernet IEEE802.3 100Base-TX and 10Base-T
Industry standard
• 32-bit PCI local bus master architecture
• Auto-sensing 10/100Mbps speed
• Plug–and-Play for automatic configuration
• LED indicators (Link, Activity)
• Low power consumption
Software support
• Supports Windows® 95/ 98/ ME/ 2000/ XP/ Vista/ 7; Linux
Technical specification
• Connector: RJ-45
• Standard: IEEE802.3 10Base-T; IEEE802.3 100Base-TX
• Transmission Rate: 10Mbps or 20Mbps, 100Mbps or 200Mbps
• IRQ Line: Assigned by system
• I/O Address: Assigned by system
• Power consumption: 1.8W (Max)
2. INSTALLATION
Hardware Installation:
1. Turn off the computer, open the cover of the computer case.
2. Select a free PCI slot. Remove the cover from the slot. Keep the screw.
You will be using it in the next step.
3. Carefully slide the APPPCI100V2 LAN card into the chosen slot. Press
firmly on the top of the modem to seal it. Fasten the LAN card to your
system with screw you removed in the previous step. Replace the
computer’s cover.
4. Plug and Fasten one RJ45 port of the network cable into the
APPPCI100V2 LAN card.
5. Connect all the power adapter and some other accessories.
Software Installation:
Use the driver from the CD included in this product.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Approx APPPCI100V2 User manual

Approx
Brand
Approx
Model
APPPCI100V2
Category
Networking cards
Type
User manual

The Approx APPPCI100V2 is a versatile and reliable network adapter designed to enhance your computer's connectivity options. With its compliance to Ethernet IEEE802.3 100Base-TX and 10Base-T industry standards, it delivers stable and high-speed network connections. The 32-bit PCI local bus master architecture ensures efficient data transfer, while the auto-sensing 10/100Mbps speed capability allows for seamless network integration.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents