Y Decor L2096-2-CH Operating instructions

ASSEMBLY INSTRUCTION

2 LIGHTS

1 LIGHTS

Lamp Body

Iron rod

1. Turn off the power.

2. Connect the white wire from wire connector to the white supply wire.

Connect the black wire from wire connector to the black supply wire.

Attach the wire connector to through the cross bar's ground wire with the green Ground screw.

3. Lock the mounting plate on the junction box with the junction box screws.

4.Put the lamp body on the mounting plate and lock with 2PCS small beads.

5. The 3PCS iron rods are aligned to three holes in the glass, then fixed to the lamp cup and locked.

This manual is also suitable for