Turbo Flex TF-CD12/6 Installation guide

Easy Installation Guide:

How To Use:

Maintenance & Care:

1.Unscrew the existing standard nozzle from the faucet to expose the threads.

2.For Faucets with threads on the outside you will not need to use the included adapter. (See Fig. A)

3.For faucets with threads on the inside use the adapter as needed

4.Make sure to use the washer (s) between the faucet & Turbo Flex 360 connections.

5.Screw on Turbo Flex 360 in clockwise motion by hand but Do Not Overtighten.

6.If faucet leaks tighten little more as needed until leak is stopped. (you may use plumber’s tape or

thread sealer for more secure seal)

For Wide spray, grip Turbo Flex head and tug downwards. (See Fig B)

Push up to original position for stream function.

If water flow is low, first check the base of the head openings for any

debris that may be stuck. To clean simply use soapy water and wipe

clean with sponge or cloth.

(Fig. A)

(Fig. B)

Threaded Insert

Washer 1

Washer 2

Turbo Flex 360

ASME A112.18.1/CSA B125.1

NSF/ANSI 61 & 372

1.5GPM/5.7 LPM MAX

Made in China

Download PDF