Livex Lighting 51872-91 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
51872-91
Type
Operating instructions

This manual is also suitable for

Livex Lighting 51872-91 is a fashionable ceiling light fixture, perfect for adding a touch of elegance to any room. It features a stunning crystal design that will catch the eye of any guest. Assembly is easy, thanks to the included instructions. Simply follow the steps outlined in the manual and you'll have your new light fixture up and running in no time. The fixture uses standard light bulbs, so you can easily customize the brightness and color temperature to match your needs.

Livex Lighting 51872-91 is a fashionable ceiling light fixture, perfect for adding a touch of elegance to any room. It features a stunning crystal design that will catch the eye of any guest. Assembly is easy, thanks to the included instructions. Simply follow the steps outlined in the manual and you'll have your new light fixture up and running in no time. The fixture uses standard light bulbs, so you can easily customize the brightness and color temperature to match your needs.

ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
51872
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and all
hardware from Junction Box. Carefully unpack your new fixture and lay out
all the parts on a clear area. Take care not to lose any small parts
necessary for installation.
2. Thread the two mounting screws into the pre-drilled holes in the mounting
plate, spaced about the same distance apart as the holes in the fixture
back plate. Attach the mounting plate to the junction box using two
junction box screws as shown. The side of the mounting plate marked
“GND” must face out. The junction box is not included.
3. Guide fixture wires through hole in center of mounting plate.
4. Follow wiring instructions carefully. (see fig.2)
5. Raise the fixture body (D) onto the mounting plate, aligning the mounting
holes with mounting screws, then lock it securely with the ball nuts (F).
6. Place the tube (C) over the socket of the fixture body (D).
7. Install the light bulbs (Not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE
RATING!
8. Hook the end of long crystals (B) to the bottom loop of the column (A) and
the top hole of the fixture body (D).
9. Hook the end of short crystals (E) to the bottom hole of the fixture body (D)
and the top hole of the metal (I).
10. Hang the crystals (H) to the top hole of the column (A). Hang the crystals
(G) to the bottom hole of the metal (I).
CONNECTING THE WIRES (Fig.2)
1. Connect the electrical wires as follows. Connect the Black wire from the
fixture to the black house (hot) Wire. Connect the white wire from the
fixture to the white (neutral) house wire. Make sure all wire nuts are
secured. You may wrap the connections with electrical tape. If your outlet
box has a ground wires (green or bare copper) connect fixture’s ground
wire to it. Otherwise attach the bare copper fixture wire to the green
ground screw on the mounting plate.
2. Tuck the wire connections neatly into the wall junction box.
Your installation is now complete. Return power to the junction
box and test the fixture.
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us on-line at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20160451872
FIG.2
FIG.1
  • Page 1 1

Livex Lighting 51872-91 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
51872-91
Type
Operating instructions
This manual is also suitable for

Livex Lighting 51872-91 is a fashionable ceiling light fixture, perfect for adding a touch of elegance to any room. It features a stunning crystal design that will catch the eye of any guest. Assembly is easy, thanks to the included instructions. Simply follow the steps outlined in the manual and you'll have your new light fixture up and running in no time. The fixture uses standard light bulbs, so you can easily customize the brightness and color temperature to match your needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents