2. Draper
  3. Anti-Freeze Tester

Draper Anti-Freeze Tester, Anti-Freeze Tester, Disc Type Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Draper Anti-Freeze Tester Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTIONS FOR USE:
Before use, refer to the vehicle manufacturer's or relevant
Haynes workshop manuals.
• Carefully remove the radiator cap using a cloth or gloves.
• Run engine to normal temperature if needed to mix fresh coolant.
• Draw fluid to level line.
• If fluid is dirty or rusty, drain then flush and refill radiator -
clean tester and redraw fluid to level line.
• Squeeze lightly to remove air bubbles.
• The number of floating discs indicates the strength of anti-freeze
in Celsius and Fahrenheit.
• Flush tester with hot soapy water and rinse with clean warm water,
Caution:
• If antifreeze is spilt on paintwork or comes into contact with the
skin, wash off immediately. The tester should be washed out
after each use.
Disc Type Anti-freeze tester
/