Kichler 34810 Installation guide

Type
Installation guide

Kichler 34810 is a mini pendant light fixture that can be used to add style and illumination to any room. The fixture comes with a variety of features to make installation and use easy, including:

  • Adjustable chain and canopy for a customized fit
  • Easy-to-follow instructions for quick and simple assembly
  • Durable construction for long-lasting use

With its stylish design and functional features, the Kichler 34810 is a great choice for any home or office.

Kichler 34810 is a mini pendant light fixture that can be used to add style and illumination to any room. The fixture comes with a variety of features to make installation and use easy, including:

  • Adjustable chain and canopy for a customized fit
  • Easy-to-follow instructions for quick and simple assembly
  • Durable construction for long-lasting use

With its stylish design and functional features, the Kichler 34810 is a great choice for any home or office.

Français p. 11
Español p. 21
ITEM #0771557
MODEL #34810
MINI PENDANT
1
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.
Kichler® is a registered trademark of
The L.D. Kichler Co. All Rights Reserved.
PACKAGE CONTENTS
2
A
Canopy
Mounting Bracket
Threaded Nipple
Hex Nut
Socket
Coupling
Shade
Screw Collar Ring
B
C
D
E
F
G
H
1
1
1
3
1
1
1
1
PART DESCRIPTION QTY.
Screw Collar Loop
Threaded Pipe
Chain
Fixture Loop
Socket Ring
Arm
Cage Ring
I
J
K
L
M
N
O
1
1
1
1
1
3
2
PART DESCRIPTION QTY.
A
D
H
K
C
I
J
L
B
G
O
E
M
N
F
3
HARDWARE CONTENTS
Wire
Connector
AA
Short
Machine
Screw
BB CC DD EE
Qty: 3
Qty: 2
Coupling
Screw
Qty: 3
Arm
Screw
Qty: 6
Arm
Knob
Qty: 6
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
IMPORTANT: NEVER attempt any work without shutting off the electricity.
Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the
circuit breaker switch(es), that control the power to the fixture or room you are working in.
Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull chain,
place it in the "OFF" position.
Do not use bulbs with wattage greater than specified on this fixture.
California Proposition 65
WARNING: This product can expose you to lead, which is known to the State of
California to cause cancer, birth defects or other reproductive harm. For more
information go to www.p65warnings.ca.gov
CAUTION
If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate
completely, please contact a licensed electrical contractor.
All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts
out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate
ETL listing and/or C.S.A. certification of this fixture.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses.
4
ASSEMBLY INSTRUCTIONS
1. Screw threaded pipe (J) onto coupling (F).
Screw fixture loop (L) onto threaded pipe (J).
3
1/4 Inch
D
C
I
B
2. Position threaded nipple (C) in mounting bracket
(B) so when mounted:
The threaded nipple (C) will protrude a
minimum of 1/4 inch beyond the raised center
portion of the mounting bracket (B).
The threaded nipple (C) height is
positioned so 1/2 the exterior threads of
the screw collar loop (I) will extend past the
canopy (A) when it is mounted.
Note: Canopy is only needed to
determine the position of the threaded nipple
and fixture loop. It will be installed later.
3. Once the proper position of the threaded nipple
(C) and mounting bracket (B) has been
determined, secure with hex nuts (D) as follows:
Screw one hex nut (D) onto the threaded
nipple (C) and tighten against the raised
portion of the mounting bracket (B).
Screw another hex nut (D) onto the threaded
nipple (C) and tighten against the flat portion
of the mounting bracket (B).
Screw the remaining hex nut (D) onto
threaded nipple (C) and tighten against the
screw collar loop (I).
2
B
A
1/4 Inch
I
C
1
J
L
F
ASSEMBLY INSTRUCTIONS
5
Hardware Used
Short Machine
Screw
x 2
BB
4. Connect mounting bracket (B) to the outlet box
with short machine screws (BB).
4
Outlet Box
C
B
BB
5. Thread chain (K) though screw collar ring (H) and
canopy (A). Using the open chain links on chain
(K), attach one end to screw collar loop (I) and the
other end to upper fixture loop (L). Weave the fixture
electrical and ground wires through every other
chain link and pass through threaded nipple (C) into
outlet box. Lower the screw collar ring (H) and
canopy (A) over the chain (K).
L
H
A
K
I
C
5
Outlet
Box
ASSEMBLY INSTRUCTIONS
6
7. Pass canopy (A) over the screw collar loop (I).
Attach screw collar ring (H) to screw collar loop
(I) to secure canopy (A).
Hardware Used
x 3Wire Connector
AA
6. Wire connection guide:
Ground wire:
For installation in the United States: Wrap
ground wire from outlet box around ground
screw preassembled on mounting bracket
(B) no less than 2 in. from wire end. Tighten
ground screw. If fixture is supplied with a
ground wire, connect to outlet ground wire
with a wire connector (AA).
For installation in Canada: If fixture is
supplied with ground wire, wrap ground wire
around ground screw on mounting bracket
(B). Tighten ground screw. Connect fixture
ground wire to outlet ground wire with the
wire connector (AA).
Supply wires:
Connect the Neutral (White) supply wire from
the outlet box to the Neutral fixture wire
(White or Parallel Cord “D” shaped and
ribbed).
Connect the Hot (Black) supply wire from the
outlet box to the Hot fixture wire (Black or
Parallel Cord round and smooth).
NOTE:
Fixture wires will either be:
• Black and White.
• Parallel Cord SPT-1 lamp wire with one
round smooth wire and one “D” shaped
ribbed wire.
6
BARE COPPER,
OR GREEN
GROUND
SUPPLY WIRE
BARE COPPER,
OR GREEN
GROUND
FIXTURE
WIRE
BLACK FIXTURE
WIRE
OR
WHITE FIXTURE
WIRE
BLACK SUPPLY
WIRE
BLACK SUPPLY
WIRE
PARALLEL
FIXTURE CORD
(ROUND AND
SMOOTH)
PARALLEL FIXTURE
CORD (“D” SHAPED
AND RIDGED
)
WHITE SUPPLY
WIRE
WHITE SUPPLY
WIRE
AA
7
H
I
A
ASSEMBLY INSTRUCTIONS
7
Hardware Used
Coupling
Screw
x 3
x 6
x 6
CC
Arm
Screw
DD
Arm
Knob
EE
9. Pass shade (G) over socket (E) and secure with
socket ring (M).
9
E
G
M
8. Secure arms (N) to coupling (F) using a coupling
screw (CC). Raise cage rings (O) to arms (N).
Pass arm screw (DD) through cage ring (O) and
secure with arm knob (EE).
8
F
N
EE
O
CC
DD
ASSEMBLY INSTRUCTIONS
8
CARE AND MAINTENANCE
TROUBLESHOOTING
Fixture does not light. 1. Fixture may be wired incorrectly.
1. Check wiring.
2. Worn or broken bulb. 2. Replace bulb.
1. Check wiring.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
• Always be certain that electric current is turned off before cleaning this item.
• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on
fixture, as it will damage the metal finish.
• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not
wash shades in an automatic dishwasher.
10.
Insert 60-watt max. medium-base Edison bulb
or CFL/LED equivalent (included) into socket
(E).
E
10
9
WARRANTY
Kichler Lighting warrants that its products will be free from defects in material and workmanship for
one (1) year from the date of purchase by the Original Purchaser.
To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly
defective parts or products to the authorized Kichler distributor that the product was purchased from
with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the
claimed product defect.
If any of the warranted products are found by Kichler, in its sole discretion, to be defective, such
products will, at Kichler’s sole option and cost, be replaced, repaired or refunded less an amount
directly attributable to Original Purchaser’s prior use of the product. Kichler will return the repaired or
replaced product prepaid freight. This warranty does not cover labor or other costs or expenses to
remove or install any defective, repaired or replaced product.
The parties hereto expressly agree that Original Purchaser’s sole and exclusive remedy against
Kichler shall be for the repair, replacement or refund of defective products as provided herein. This
warranty extends only to product ownership by the Original Purchaser; is not transferable whether to
heirs, subsequent owners, or otherwise; and is void if the Original Purchaser ceases to own the
product.
This warranty does not apply to any products that have been subjected to misuse, mishandling,
misapplication, connected to voltage at more than 5% above standard North American voltage,
unusual use (including but not limited to use in an environment where the annual average ambient
operating temperature is below 27 or above 95 degrees Fahrenheit), neglect (including but not limited
to improper maintenance), accident, acts of god such as high winds, improper installation or care,
failure to follow the Product’s written instructions for normal use and care, improper packaging of
products returned to Kichler, modification (including but not limited to use of unauthorized parts or
attachments), or adjustment or repair. Significant product exposure to chemicals, harsh cleaners, salt
water or salt air will void any and all warranties on exterior finishes. This warranty only applies when
all components, including transformers, have been provided by Kichler. Substituting another
manufacturer’s product and/or components will render the warranty completely void.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR
PURPOSE OR INFRINGEMENT. ORIGINAL PURCHASER SHALL IN NO EVENT BE ENTITLED
TO, AND KICHLER LIGHTING SHALL NOT BE LIABLE FOR, INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING, BUT NOT LIMITED TO LOSS
OF PROFIT, PROMOTIONAL AND/OR MANUFACTURING EXPENSES, OVERHEAD, INJURY TO
REPUTATION AND/OR LOSS OF CUSTOMERS.
Canopy C34810
Mounting Bracket XBAR01
Threaded Nipple TN18200
Hex Nut NUT18
Shade G34808
Screw Collar Ring SCG-AVI
Screw Collar Loop SCL-AVI
Threaded Pipe PIPEX12-AVI
Chain CHAIN-AVI
Fixture Loop TLOOP07-AVI
Socket Ring LR013X180-AVI
Wire Connector WC001
Short Machine Screw SCR832X050
Coupling Screw CS34810
Arm Screw AS34810
Arm Knob TK2X832-AVI
10
Rev. 08-29-19
Kichler® is a registered trademark of
The L.D. Kichler Co. All Rights Reserved
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m.,
EST, Monday - Friday.
Printed in China
A
B
C
D
G
H
J
K
L
M
I
AA
BB
CC
DD
EE
PART DESCRIPTION PART #
A B
C
D
H
GND
G
I
K
L M
AA
BB
J
CC
DD
EE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Kichler 34810 Installation guide

Type
Installation guide

Kichler 34810 is a mini pendant light fixture that can be used to add style and illumination to any room. The fixture comes with a variety of features to make installation and use easy, including:

  • Adjustable chain and canopy for a customized fit
  • Easy-to-follow instructions for quick and simple assembly
  • Durable construction for long-lasting use

With its stylish design and functional features, the Kichler 34810 is a great choice for any home or office.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI