Supreme Pump Filter- Replacement Flushing Instructions:
Note: Wing nut flush bulb is included in
your original pump package.
Supreme Pump Filter- Replacement Flushing Instructions:
Note: Wing nut flush bulb is included in
your original pump package.
1. Remove Supreme filter
and pre-filter.
2. Remove ALL stickers
from Supreme filter and
pre-filter.
4. Attach flush bulb assembly
to the sink faucet. Slowly
turn on water until a thin
stream of water begins to
flow. Flush for five minutes.
5. Turn off water,
remove wing-nut flush
bulb assembly, and re-
install filter into your
pump.
3. Thread the flush
bulb assembly to
Supreme filter.
3. Thread the flush
bulb assembly to
Supreme filter.
2. Remove ALL stickers
from Supreme filter and
pre-filter.
1. Remove Supreme filter
and pre-filter.
4. Attach flush bulb assembly
to the sink faucet. Slowly
turn on water until a thin
5. Turn off water,
remove wing-nut flush
bulb assembly, and re-
install filter into your
pump.
4. Attach flush bulb assembly
to the sink faucet, slowly
turn on water until a thin
stream of water begins to
flow. Flush for five minutes.
4. Attach flush bulb assembly
to the sink faucet, slowly
turn on water until a thin
stream of water begins to
flow. Flush for five minutes.
-
1
Seychelle SEYCHELLE-1-10400-FC Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Pitco SRTG User manual
-
PurePro LUX-106UV-P User manual
-
Pondmaster 02712-OB Operating instructions
-
PowerTech CD4045TF162 User manual
-
Smithco AER8 Flyer Owner's manual
-
-
Bissell 36U3 User manual
-
Mira Miralec/Supreme Installation & User Guide
-
-
V-ZUG 5109900010 User manual
