Contec VPC-500 Owner's manual

Brand: Contec

Model: VPC-500

Type: Owner's manual

FA-PC VPC Series

VPC-500

User’s Manual

CONTEC CO., LTD.

VPC-500 Series User’s Manual

Check Your Package

Thank you for purchasing the CONTEC product.

The product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or missing items,

contact your retailer.

■

Product Configuration List

VPC-500-76412B-C01

VPC-500-76412B-C05

Name

Pcs.

AC Power Cable (125VAC) *1

Product guide

Warranty Certificate

Recovery Media

■

Product Configuration Image

PC AC Power Cable Product Guide Warranty Certificate Recovery Media

*1 Do not use the bundled AC power cable with other products.

* See the Product Configuration List to check if all the components are included for the specified number of units.

Product Guide

Warranty

Certificate

VPC-500 Series User’s Manual

(1) No part of this document may be copied or reproduced in any form by any means without prior

written consent of CONTEC CO., LTD.

(2) CONTEC CO., LTD. makes no commitment to update or keep current the information contained in

this document. The information in this document is subject to change without notice.

(3) All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

(4) Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

(5) Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS,

Microsoft and Windows are trademarks of Microsoft Corporation. Other brand and product names

are trademarks of their respective holder.

VPC-500

シリーズ

ユーザーズマニュアル

iii

Table of Contents

Check your package ............................................................................................................................. i

Table of Contents ............................................................................................................................... iii

1. INTRODUCTION 1

About the Product ............................................................................................................................... 1

◆Features .................................................................................................................................... 1

◆Supported OS ........................................................................................................................... 1

Customer Support................................................................................................................................ 2

Web Site ....................................................................................................................................... 2

How to Obtain Service ........................................................................................................................ 2

Liability ............................................................................................................................................... 2

Safety Precautions ............................................................................................................................... 3

◆Safety Information.................................................................................................................... 3

◆Caution on the VPC-500 Series................................................................................................ 3

2. SYSTEM REFERENCE 7

Specification ........................................................................................................................................ 7

Physical Dimensions ........................................................................................................................... 9

3. HARDWARE SETUP 13

Before Using the Product for the First Time ..................................................................................... 13

Hardware Setup ................................................................................................................................. 14

◆Attaching the Attachment Stand............................................................................................. 14

◆Attaching the FG .................................................................................................................... 15

◆Installation Requirements ....................................................................................................... 16

4. EACH COMPONENT FUNCTION 19

Component Name .............................................................................................................................. 19

Component Function ......................................................................................................................... 21

◆LED : POWER LED, ACCESS LED ..................................................................................... 21

◆Power Switch : POWER SW .................................................................................................. 21

◆Serial Port Interface : SERIAL ............................................................................................... 22

◆Analog RGB Port Interface : ANALOG RGB ....................................................................... 23

◆HDMI Port Interface : HDMI ................................................................................................. 24

◆USB3.0 Port Interface : USB3.0 ............................................................................................ 25

◆USB2.0 Port Interface : USB2.0 ............................................................................................ 25

◆LAN Port Interface : LAN ..................................................................................................... 26

◆Line out Interface : LINE OUT .............................................................................................. 26

VPC-500 Series User’s Manual

5. BIOS SETUP 27

Introduction ....................................................................................................................................... 27

◆Starting Setup ......................................................................................................................... 27

◆Using Setup ............................................................................................................................ 28

◆Getting Help ........................................................................................................................... 28

◆In Case of Problem ................................................................................................................. 28

◆A Final Note About Setup ...................................................................................................... 28

Main Menu ........................................................................................................................................ 29

◆Setup Item .............................................................................................................................. 29

Main .................................................................................................................................................. 30

Configuration .................................................................................................................................... 31

◆CPU Configuration ................................................................................................................. 33

◆Chipset Configuration ............................................................................................................ 34

◆LAN Configuration ................................................................................................................ 35

◆Graphics Configuration .......................................................................................................... 36

◆PCI/PCIE Configuration ......................................................................................................... 38

◆PCI Express Configuration ..................................................................................................... 39

◆SATA Configuration .............................................................................................................. 40

◆USB Configuration ................................................................................................................. 41

◆USB Configuration ................................................................................................................. 42

◆Power Control Configuration ................................................................................................. 43

◆TPM Configuration ................................................................................................................ 45

◆Super IO Configuration .......................................................................................................... 46

◆H/W Monitor .......................................................................................................................... 47

◆Serial Port Console Redirection ............................................................................................. 48

Security ............................................................................................................................................. 49

Boot ................................................................................................................................................... 50

Save & Exit ....................................................................................................................................... 52

6. APPENDIX 53

Battery ............................................................................................................................................... 53

1. Introduction

VPC-500 Series User’s Manual

Introduction

About the Product

This product is a FA personal computer equipped with the Intel ® Atom processor E3845. It has

sufficient performance with low power consumption, as well as set up at a small area.

It has extension interfaces such as Analog RGB, HDMI, 1000BASE-T, USB 3.0, and serial. These Units

are ideal for a wide range of embedded applications, such as control devices and information terminals

based on general-purpose PC OSes.

I adopt Embedded-type chipset and CPU. The use of parts that can be stable supply, can be used with

confidence.

◆

Features

■

Contributing to reduction of running cost and promotion of energy efficiency

It adopts the low-power platform with Intel

Atom

(TM)

Processor E3845 that realizes lower power

consumption while ensuring sufficient performance.

■

The compact size that can install at a small area

This product is a compact size PC of 76(W) x 193(D) x 225(H)mm that can install at a small area. It is

also possible to attach to the VESA standard 75 x 75, 100 x 100mm using the stand.

■

The silent design that held the noise in check

It minimizes the noize while ensuring sufficient performance by abolishing a CPU fan.

■

Major types of peripherals are supported with rich interfaces including

It has a variety of extended interface such as Analog RGB x 1, HDMI x 1, 1000BASE-T x 1, USB3.0 x

1, USB2.0 x 2, serial (RS-232C) x 1.

■

Safety design required for embedded applications

For Windows Embedded Standard installed model, it is possible to use the EWF*2 function of OS. It is

designed for safety required for embedding purpose, for example, prohibiting unwanted writing to the

CF card with EWF function will relieve the concern about the writing limits to the CF card and prevent

an unintentional system alteration.

EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that protects the disk from being actually

written by

redirecting the writing to RAM

■

The wireless LAN of the conformity IEEE802.11b/g/n (Only in VPC-500R-76412B)

It is the conformity IEEE802.11b/g/n and copes with coding security such as WEP, WPA.

◆Supported OS

・

Windows Embedded Standard 7 SP1 32bit Japanese

1. Introduction

VPC-500 Series User’s Manual

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently

and comfortably.

Web Site

Japanese http://www.contec.co.jp/

English http://www.contec.com/

Chinese http://www.contec.com.cn/

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Free download

You can download updated driver software and differential files as well as sample programs available in

several languages.

Note! For product information

Contact your retailer if you have any technical question about a CONTEC product or need its price,

delivery time, or estimate information.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you

purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the

warrantor be liable for any incidental or consequential damages due to such defect or consequences that

arise from inexperienced usage, misuse, or malfunction of this device.

1. Introduction

VPC-500 Series User’s Manual

Safety Precautions

Understand the following definitions and precautions to use the product safely

◆Safety Information

This document provides safety information using the following symbols to prevent accidents resulting

in injury or death and the destruction of equipment and resources. Understand the meanings of these

labels to operate the equipment safely.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury or in property damage.

◆Caution on the VPC-500 Series

■

Handling Precautions

・

Always check that the power supply is turned off before connecting or disconnecting power cables.

・

Do not use this product in a location where flammable or corrosive gases are present. Doing so may

lead to explosions, fire, electric shock, or product failures.

・

Do not touch the gold-plated terminals (such as the edge connectors) of this product with your

hands. Doing so may lead to malfunctions or product failures. Be sure to turn the power off before

performing such an action.

・

When transporting or moving this product, be sure to use the original packaging in which it was

shipped from CONTEC or other equivalent packaging in order to prevent vibrations, impacts, and

static electricity.

・

Do not modify the product.

・

Always turn off the power before inserting or removing circuit boards or cables.

・

This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other

applications that require a very high level of reliability. Do not use the product in such applications.

・

If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

・

Do not attempt to replace the battery as inappropriate battery replacement poses a risk of explosion.

・

For battery replacement, contact your retailer as it must be performed as a process of repair.

・

When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances. For details on replacing the battery, refer to the appendix.

DANGER

WARNING

ION

ARNING

1. Introduction

VPC-500 Series User’s Manual

・

Do not use or store this product in a location exposed to high or low temperature that exceeds range

of specification or susceptible to rapid temperature changes.

Example: - Exposure to direct sun

- In the vicinity of a heat source

・

Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this

product with its interior penetrated by water or any other fluid or conductive dust. If this product

must be used in such an environment, install it on a dust-proof control panel, for example.

・

Avoid using or storing this product in locations subject to shock or vibration that exceeds range of

specification.

・

Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such

products will cause this product to malfunction.

・

To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.

Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or

discoloration of the paint.

・

This product’s case may become hot. To avoid being burned, do not touch that section while this

product is in operation or immediately after turning off the power. Avoid installation in a location

where people may come into contact with that section.

・

CONTEC does not provide any guarantee for the integrity of data on SSD.

・

Always remove the power cable from the power outlet before mounting or removing an expansion

board and before connecting or disconnecting a connector.

・

Always remove the power cable from the power outlet before connecting or disconnecting a

connector.

・

To prevent corruption of files, always shutdown the OS before turning off this product.

・

CONTEC reserves the right to refuse to service a product modified by the user.

・

In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

cord immediately and contact your retailer.

・

Use an AC cable that matches the power supply voltage and outlet plug that you are using. (The

included cable is designed for use with a 125 VAC power supply.)

・

To connect with peripherals, use a grounded, shielded cable.

・

The SSD card connector doesn't support hot plug. The pulling out opening of the SSD card cannot

be done in the state of power supply ON. Please neither pulling out opening of SSD in the state of

power supply ON of this product nor come in contact with SSD. This product may malfunction or

cause a failure.

・

If you use any other SSD than our SSD, we can not guarantee this product’s specification. When

you newly select SSD for this product, you should read “Chapter 7” at first. If you select

unpreferable SSD, the system may work out of order.

・

Component Life:

(1) Power ----- During continuous operation at 40

℃

, the assumed life is about 4 year (vertical

installation). However, it may be shortened due to operation temperature (high

temperature).

CAUTION

1. Introduction

VPC-500 Series User’s Manual

(2) Battery --- The internal calendar clock and CMOS RAM are backed by a Lithium primary

battery. The backup time at a temperature of 25°C with the power disconnected is

7 years or more.

* Replacement of expendables is handled as a repair (there will be a charge).

・

Do not use a UPS (Uninterruptible Power Supply) that generates square waves. Connecting the

product to this type of UPS may lead to product failure.

・

Replacing the battery with an inappropriate type of battery may lead to explosions. Dispose of used

batteries according to the instructions in the instruction manual.

・

When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances.

・

If using this product in an environment that is subject to noise, attach a ferrite core to each signal

cable (LAN, USB, serial, analog RGB, HDMI, and line output).

・

This product's specifications allow the device to be rebooted from the BIOS screen during startup.

This has no effect on operation after the OS boots.

The object of the standard of this product become only a main body.

AUTION

1. Introduction

VPC-500 Series User’s Manual

2. System Reference

VPC-500 Series User’s Manual

System Reference

Specification

Table 2.1 Functional Specification < 1 / 2 >

Model VPC-500-76412B-C01 VPC-500-76412B-C05

CPU Intel® Atom™ Processor E3845 1.91GHz

BIOS AMI BIOS

Memory

2GB、204pin SO-DIMM socket x1、PC3-10600 (DDR3L 1333) ECC

Graphic *1 Intel® HD Graphics controller (built-in CPU)

Analog RGB (15pin D-SUB connector) 1 port,

HDMI (19pin HDMI TYPE-A connector) 1 port

System

resolution

Analog RGB

640×480, 800×600, 1,024×768, 1,152×864, 1,280×600, 1,280×720, 1,280×768, 1,280×800,

1,280×960, 1,280×1,024, 1,360×768, 1,366×768, 1,400×1,050, 1,440×900, 1,600×900,

1,680×1,050, 1,920×1,080, 1,920×1,200 (1,677 colors, ReduceBlanking)

HDMI 640×480, 800×600, 1,024×768, 1,152×864, 1,280×600, 1,280×720, 1,280×768, 1,280×800,

1,280×960, 1,280×1,024, 1,360×768, 1,366×768, 1,400×1,050, 1,440×900, 1,600×900,

1,680×1,050, 1,920×1,080, 1,920×1,200 (1,677 colors, ReduceBlanking)

Storage

SATAⅡ 2.5” SSD 32GB x1

Audio Realtek ALC892 controller

HD Audio compliant, Line out (3.5φ stereo minijack) 1 port

LAN Intel I210-AT controller

1000BASE-T/100BASE-TX (RJ-45 connector) 1 port (Wake On LAN support)

USB USB 3.0 compliant (TYPE-A connector) 1 port (rear)

USB 2.0 compliant (TYPE-A connector) 2 port (front)

Serial I/F RS-232C/422/485 (9pin D-SUB connector(male)) 1 port

Baud rate : 50 - 115,200bps

Hardware Monitor CPU temperature, power voltage

RTC/CMOS Litium backup battery life : 7 years or more

The real-time clock is accurate within ±3 minutes (at 25°C) per month

Power Management Power management setup via BIOS, Power On by Ring / Wake On LAN,

Supports PC98/PC99 ACPI Power management

Support OS Windows Embedded Standard 7 SP1 32bit Japanese

*1 If the display cable is connected after the PC turns on, BIOS is not displayed.

2. System Reference

VPC-500 Series User’s Manual

Table 2.1 Functional Specification < 2 / 2 >

Model

VPC-500-76412B-C01

VPC-500-76412B-C05

Power supply

Rated input voltage

100 - 240VAC (momentary power failure : 10ms or more) *2

Range of input

voltage

90 - 264VAC

Power consumption

(Max.)

100 -240VAC : 2A

External device

power supply

capacity

USB3.0 I/F : +5V : 0.9A (900mA x1)

USB2.0 I/F : +5V : 1A (500mA x2)

Physical dimensions

(mm)

76(W)×193(D)×225(H) (No protrusions)

Weight

About 2.2kg (Excluding attachment fittings)

Standard

VCCI class A

*2 If a blackout happens at moments more than a rule, the PC may not return noemalcy.

The PC turn off. The PC turn on after having put the interval of around 30 seconds.

Table 2.2 Installation Environment Requirements

Model VPC-500-76412B-C01 VPC-500-76412B-C05

Ambient

specifications

Operating temperature

0 - 40

℃

Storage temperature

-10 - 60℃

Humidity 10 - 90%RH (No condensation)

Floating dust particles

Not to be excessive

Corrosive gases

None

Line-noise

resistance

Line noise

AC line / ±2kV, Signal line / ±1kV

(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)

Static

electricity

resistance

Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)

Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)

Vibration

resistance

Sweep

resistance

10 - 57Hz / semi-amplitude : 0.075 mm, 57 - 150Hz / 9.8m/s2 (1G)

40 min. each in x, y, and z directions

(JIS C60068-2-6 compliant, IEC60068-2-6 compliant)

Impact resistance

98m/s2 (10G) / 11ms / half-sine shock for 3 times in x, y, and z directions

(JIS C60068-2-27 compliant, IEC60068-2-27 compliant)

Grounding

Class D grounding, SG-FG / continuity

2. System Reference

VPC-500 Series User’s Manual

Physical Dimensions

■

VPC-500-76412B-C01, VPC-500-76412B-C05

< Main unit dimensions >

Figure 2.1 VPC-500-76412B-C01, VPC-500-76412B-C05 Main unit dimensions

225.1

216.8

(3.4)

(8.1)

CO NTEC CO . , LTD .

MADE IN ######

INPUT : 100-240 VAC 　 X.X A

MODEL: VPC-5 00- XXXXXX

SERIA L N o . : XXXXXXXXXXXXX

2D-

BARCODE

VCCI- A

この装置は､クラスＡ情報技術装置です。

この装置を

家庭環境で使用すると電波妨害を引き起こ

すことがあ

ります。この場合には使用者が適切な対策を講ず

るよう

要求されるこ

とがあります。

[mm]

2. System Reference

VPC-500 Series User’s Manual

< Dimensions when attached to the stand (Horizontal Installation) >

Figure 2.2 VPC-500-76412B-C01, VPC-500-76412B-C05 Dimensions when attached to the stand (Horizontal

Installation)

225.1

216.8

(3.4)

(8.1)

(11.5)

CO NTEC CO . , L TD.

MADE IN ######

INPUT : 100-240 V AC 　 X.X A

MODEL: VPC-5 00- XXXXXX

SERIA L N o. : XXXXXXXXXXXXX

2D-

BARCODE

VCCI- A

この装置は､クラスＡ情報技術装置です。この装置を

家庭環境で使用すると電波妨害を引き起こすことがあ

ります。この場合には使用者が適切な対策を講ずるよう

要求されることがあります。

[mm]

2. System Reference

VPC-500 Series User’s Manual

< Dimensions when attached to the stand (Vertical installation) >

Figure 2.3 VPC-500-76412B-C01, VPC-500-76412B-C05 Dimensions when attached to the stand

(Vertical installation)

225.1

216.8

(3.4)

(11.5)

(8.1)

INPUT : 100-240 V AC　X.XA

MODEL: VPC-500-76412B-C01

SERIAL No. : XXXXXXXXXXXXX

2D-

BARC

この装置は､クラスＡ情報技術装置です。この装置を

家庭環境で使用すると電波妨害を引き起こすことがあ

ります。この場合には使用者が適切な対策を講ずるよう

要求されることがあります。

MADE IN ##

CONTEC C O .,

VCCI-

100

[mm]

2. System Reference

VPC-500 Series User’s Manual

3. Hardware Setup

VPC-500 Series User’s Manual

Hardware Setup

Before Using the Product for the First Time

Follow the next steps to set up this product :

STEP1 By referring to the information in this chapter, install, connect and set this product.

STEP2 Connect cables.

Connect the cable of necessary external devices, such as keyboard and a display, to this

product using appropriate cables.

STEP3 Turn on the power.

After verifying that you have correctly followed steps 1 and 2, turn on the power.

If you find any abnormality after turning on the power, turn it off and check to see if the

setup has been performed properly.

STEP4 Set up BIOS.

By referring to Chapter 5, set up BIOS. This setup requires a keyboard and a display.

* Before using this product, be sure to execute " Restore Defaults " to initialize the BIOS

settings to their default values.

(See Chapter 5, " Save &a Exit.")

・

Be sure to connect the keyboard and mouse to it before turning the power on for the first time.

・

Be sure to connect the display before turning the power on. Connecting the display after turning the

power on may prevent it from being displayed properly.

CAUTION

3. Hardware Setup

VPC-500 Series User’s Manual

Hardware Setup

・

Before you start, be sure that the power is turned off.

・

Remove only those screws that are explained. Do not move any other screw.

◆Attaching the Attachment Stand

(1) Attach the attachment stand.

Do not attach with excess force.

Figure 3.1 Attaching the Attachment Stand

3. Hardware Setup

VPC-500 Series User’s Manual

◆Attaching the FG

(1) Use screws to attach the FG

Figure 3.2 Attaching the FG

Screw holes may be damaged if screws are tightened with a torque greater than the specified

torque.The specified tightening torque is 5 - 6kgf

⋅

cm.

AUTION

Page is loading ...

Contec VPC-500 Owner's manual

Contec VPC-500 Owner's manual

Contec VPC-500 Owner's manual

Related papers

Other documents