Pegasus 11011-M28 Installation guide

Type
Installation guide
11011-M28
Mirror Installation
Care and Cleaning Instruction
Product Specification
Birch Solid Wood Frame
Tobacco Color Finish
Wood Cleat Included
Beveled Edge Mirror
(28W x 1.3D x 32H) Inch
Suggested Tools
and Material
Philips Screwdriver
Safety Glasses
Tape Measure
Drill
Parts/Hardware Included
3x
1x
1x
3x
Wood cleat
Part #: 7001
Level
Part #: 7002
Plastic Plug
Part #: 200001
Wood Screw
Part #: 115010
wood cleat
plastic plug
wood screw
Predrilled holes
level
Drill 3 holes on the wall
Place wood cleat on the wall where the mirror should be hung. Place the level on the wood cleat. Level the wood
cleat, then drill 3 holes on the wall according to the predrilled holes on the wood cleat. Place plastic plugs into
the predrilled holes in the wall; place the wood cleat against the wall and use the wood screws to secure. Mount
the mirror on the wood cleat.
plastic
plug
wood
screw
wood cleat
Clean the product by using a soft, slightly damp cloth. Buff the product by using a soft, dry cloth. When
cleaning the mirror, spray with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes.
Clean up excess water and spills immediately. Blot instead of using a wiping action. Water left over for a
long period of time will cause white spots in the finish.
Page 1 of 1
Place wood cleat on the wall
Use the wood screws to secure
Manhattan 28 in. x 32 in. Mirror
Mount the mirror on the wood cleat.
  • Page 1 1
  • Page 2 2

Pegasus 11011-M28 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages