Holman CO1701 User manual

Type
User manual

Holman CO1701

The Holman CO1701 is a versatile electronic tap timer suitable for watering small gardens, pots, and flower beds. It directly connects to your garden tap and offers both automatic and manual operation modes.

With its extensive programming options, you can customize watering schedules to fit your specific needs. The "How Often" dial allows you to set watering intervals from every hour to once a week, while the "How Long" dial lets you specify run times from 1 minute to 120 minutes.

The CO1701 features a manual ON/OFF function for added convenience. When set to "ON," it will continue watering until manually turned off. The "OFF" position stops all watering cycles, whether automatic or manual.

Holman CO1701

The Holman CO1701 is a versatile electronic tap timer suitable for watering small gardens, pots, and flower beds. It directly connects to your garden tap and offers both automatic and manual operation modes.

With its extensive programming options, you can customize watering schedules to fit your specific needs. The "How Often" dial allows you to set watering intervals from every hour to once a week, while the "How Long" dial lets you specify run times from 1 minute to 120 minutes.

The CO1701 features a manual ON/OFF function for added convenience. When set to "ON," it will continue watering until manually turned off. The "OFF" position stops all watering cycles, whether automatic or manual.





CO1701 2 Dial Tap Timer.indd 1 14/11/12 4:34 PM


Technical Data................................................................. p1
Glossary........................................................................... p2
Applications & Safety Instructions................................
p3
Connecting to the Tap & Operation Modes...................
p4
Tap Timer Diagram..........................................................
p5
Manual Operation (ON / OFF).........................................
p6
Automatic Programming................................................
p7
Notes Pages....................................................................
p8 - 9
Warranty...........................................................................
Back Page
CO1701 2 Dial Tap Timer.indd 2 14/11/12 4:34 PM


1
Tap Connection: 20mm BSP Female
Hose Connection: 12mm Hose
Snap-on or 20mm BSP Male
Water pressures: Max. 8 Bar 800kPa
Water Temperature: Max. 40ºC
Irrigation Medium: Clean Water
Batteries: 2 x 1.5V AAA Alkaline
Batteries (Not Supplied)
CO1701 2 Dial Tap Timer.indd 3 14/11/12 4:34 PM

2

1. Universal Tap Adaptor
2. Tap Connection
3. Union Nut
4. Control Dials
5. Battery Compartment
6. Clear Screw-on Cover
7. Snap-on Hose
Connection
1
2
3
4
5
6
7
This Electronic 2 Dial Tap Timer is ideal for watering small garden areas, pots & ower beds, tting
directly onto your garden tap.
Safety Instructions
For reasons of long life reliability, only use good quality ALKALINE batteries.
To prevent the tap timer failing through weak batteries during a prolonged absence, the batteries must
be replaced before re-use. The functional reliability of the tap timer depends on the functional capability
of the batteries. the service life is about 1500 ON / OFF cycles. Programme the tap timer before
connecting to the water tap with the tap closed. Use the tap timer in outdoor areas only. Before the
start of the frost period the tap timer must be stored away from frost and damp. The temperature
of water through the tap timer must not exceed 40ºC. Use only clean water.
Not suitable for use in freezing conditions.
CO1701 2 Dial Tap Timer.indd 4 14/11/12 4:34 PM

3

5. Battery Compartment
6. Clear Screw-on Cover
7. Snap-on Hose
Connection
This Electronic 2 Dial Tap Timer is ideal for watering small garden areas, pots & ower beds, tting
directly onto your garden tap.
Safety Instructions
For reasons of long life reliability, only use good quality ALKALINE batteries.
To prevent the tap timer failing through weak batteries during a prolonged absence, the batteries must
be replaced before re-use. The functional reliability of the tap timer depends on the functional capability
of the batteries. the service life is about 1500 ON / OFF cycles. Programme the tap timer before
connecting to the water tap with the tap closed. Use the tap timer in outdoor areas only. Before the
start of the frost period the tap timer must be stored away from frost and damp. The temperature
of water through the tap timer must not exceed 40ºC. Use only clean water.
Not suitable for use in freezing conditions.
CO1701 2 Dial Tap Timer.indd 5 14/11/12 4:34 PM


4
For connection you need a water tap with a 20mm or 25mm thread.
1. Unscrew the union nut (3) to enable the water tap connection (2) to move freely.
2. Screw the tap timer rmly onto the water tap by the tap connection. Turn the unit to face you so the
Control Dials (4) can be easily seen.
3. Screw the Union Nut (3) up tight.
4. Connect your hose to the Snap-on Hose Connection (7).
NOTE: Screw the connection by hand. DO NOT use a wrench. Always keep the Clear Screw-on Cover
(6) closed on the unit to prevent dirt from getting into the mechanism, preventing operation.
Operation Modes: This 2 Dial Tap Timer has both Automatic and manual functions. Programming is in
intervals from every hour, to once a week. The minimum run time is 1 minute, up to 120 minutes.
The timer can be manually turned ON and OFF as required.

Turn the dial to select:
from every hour
to once a week.
Select from the
11 positions
or Reset.
NOTE: Fit 2 x 1.5V AAA ALKALINE Batteries (Ensure they are good quality)
CO1701 2 Dial Tap Timer.indd 6 14/11/12 4:34 PM


5
For connection you need a water tap with a 20mm or 25mm thread.
1. Unscrew the union nut (3) to enable the water tap connection (2) to move freely.
2. Screw the tap timer rmly onto the water tap by the tap connection. Turn the unit to face you so the
Control Dials (4) can be easily seen.
3. Screw the Union Nut (3) up tight.
4. Connect your hose to the Snap-on Hose Connection (7).
NOTE: Screw the connection by hand. DO NOT use a wrench. Always keep the Clear Screw-on Cover
(6) closed on the unit to prevent dirt from getting into the mechanism, preventing operation.
Operation Modes: This 2 Dial Tap Timer has both Automatic and manual functions. Programming is in
intervals from every hour, to once a week. The minimum run time is 1 minute, up to 120 minutes.
The timer can be manually turned ON and OFF as required.

Turn the dial to select:
from every hour
to once a week.
Select from the
11 positions
or Reset.
NOTE: Fit 2 x 1.5V AAA ALKALINE Batteries (Ensure they are good quality)

Turn the dial to select:
from 1 minute upto
120 minutes.
Select from the
10 positions
or ON / OFF.
CO1701 2 Dial Tap Timer.indd 7 14/11/12 4:34 PM
6



Turn the “How Long” Dial to “ON”.
The unit will water until this dial is turned to “OFF”.
NOTE: There is a 10 second delay.

The “OFF” position on the “How Long”
Dial will stop an automatic or manual
watering cycle.
Install the 2 x 1.5V AAA Alkaline batteries in the battery tray. Please note the polarity + and
-
.
Select “How Long” you wish to water (10 position dial from 1 minute to 120 minutes).
Select “How Often” you wish to water (11 position dial from every hour, to once a week).
The unit will commence watering within 10 seconds to conrm the automatic watering start time.
The next automatic watering will follow according to the frequency selected (How Often).
Note: When changing batteries, turn the “How Often” dial to RESET and the “How Long” dial
to OFF, for 5 seconds before re-programming the unit.
CO1701 2 Dial Tap Timer.indd 8 14/11/12 4:34 PM
7



Turn the “How Long” Dial to “ON”.
The unit will water until this dial is turned to “OFF”.
NOTE: There is a 10 second delay.

The “OFF” position on the “How Long”
Dial will stop an automatic or manual
watering cycle.
Install the 2 x 1.5V AAA Alkaline batteries in the battery tray. Please note the polarity + and
-
.
Select “How Long” you wish to water (10 position dial from 1 minute to 120 minutes).
Select “How Often” you wish to water (11 position dial from every hour, to once a week).
The unit will commence watering within 10 seconds to conrm the automatic watering start time.
The next automatic watering will follow according to the frequency selected (How Often).
Note: When changing batteries, turn the “How Often” dial to RESET and the “How Long” dial
to OFF, for 5 seconds before re-programming the unit.
CO1701 2 Dial Tap Timer.indd 9 14/11/12 4:34 PM
8


CO1701 2 Dial Tap Timer.indd 10 14/11/12 4:34 PM
9


CO1701 2 Dial Tap Timer.indd 11 14/11/12 4:34 PM

Warranty: We will honour all statutory guarantees that this
product is of acceptable quality. (including that it is t for purpose)
HOLMAN Industries: 47 Walters Drive, Osborne Park, WA 6017.
Ph: +61 8 9204 1011 www.holmanindustries.com.au
Battery:
If battery power becomes low,
the valve closesautomatically.
In this case please insert new
ALKALINE batteries.
Checking Functionality Faults
Have batteries been correctly inserted?
Are the batteries at?
Is the water tap open?
Is the program data correct?
has the unit been set to Manual OFF?
CO1701 2 Dial Tap Timer.indd 12 14/11/12 4:34 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Holman CO1701 User manual

Type
User manual

Holman CO1701

The Holman CO1701 is a versatile electronic tap timer suitable for watering small gardens, pots, and flower beds. It directly connects to your garden tap and offers both automatic and manual operation modes.

With its extensive programming options, you can customize watering schedules to fit your specific needs. The "How Often" dial allows you to set watering intervals from every hour to once a week, while the "How Long" dial lets you specify run times from 1 minute to 120 minutes.

The CO1701 features a manual ON/OFF function for added convenience. When set to "ON," it will continue watering until manually turned off. The "OFF" position stops all watering cycles, whether automatic or manual.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI