2. Lenco Marine
  3. 15002-101
15002-101

Lenco Marine 15002-101 Specification

  • Hello! I am an AI chatbot trained to assist you with the Lenco Marine 15002-101 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the product number for the 9" x 18" standard mount trim tab kit?
    What is included in the 15002-101 trim tab kit?
    What is the maximum height needed for the actuator in a 9" tab length?
    What type of switches are recommended to complete the trim tab system?
    What is the difference between the standard mount and edge mount trim tab kits?
Deutsch Connections
Waterproof
We make the
best boats better!
™
Standard Mount
9" x 18"
Instant response electric actuators
are fully submersible, maintenance-
free and sealed for life
Stainless steel hinge
316 super buff stainless
steel rams
High-impact, corrosion-proof mounts
12-gauge (2.6 mm) laser cut
stainless steel trim tab blades
1/4" (.63 cm) stainless steel
bolts with lock nuts
High-impact, ultraviolet resistant
nylon 66, 50% glass fiber reinforced
thermoplastic housing
Trim Tab Kits
B
u
i
l
d
i
n
g
E
l
e
c
t
r
i
c
T
r
i
m
T
a
b
s
S
i
n
c
e
1
9
8
6
Trim tabs make the single most
important difference in the way your
boat rides and performs. They are
optional on some boats but should
be as standard as power trim and
tilt. Lenco trim tabs make your boat
ride smoother, drier, faster and with
increased safety whether on a small
skiff or a mega-yacht. Lenco’s ballscrew
design is more reliable, three times
more powerful and features an instant
response, which makes them very
user friendly compared to typical
hydraulics. We also like being oil-free
and environmentally conscious.
• Instant response electric actuators for
precise control
• Everything is fully submersible,
maintenance-free and sealed for life
• Self-locking ballscrew will not drift,
even while backing down
• 12-gauge (2.6 mm) laser cut stainless
steel trim tab planes
• Stainless steel rams stand up to any
sea conditions
• High-impact corrosion-proof mounts
look great through years of abuse
• Clean, time and space-saving
installation
• Sizes available to fit any boat with
12- or 24-volt actuators
Each kit includes:
• 12-volt actuators (2) with 6 foot
leads and Deutsch connectors
• Stainless steel trim tab blades (2)
• 20' actuator extension harnesses (2)
with Deutsch connectors
• Upper mounting bracket
with gland seal
• Lower mounting bracket
• All stainless steel mounting hardware
• Available in standard mount
and edge mount (space saver)
• Switches sold separately
B
u
i
l
d
i
n
g
E
l
e
c
t
r
i
c
T
r
i
m
T
a
b
s
S
i
n
c
e
1
9
8
6
5/8"
(1.59 cm)
14"
(35.56 cm)
max.
height
needed
for
actuator
3/8"
(.95 cm)
9"
(22.86 cm)
3/4"
(1.9 cm)
12"
(30.48 cm)
3/4"
(1.9 cm)
1"
(2.54 cm)
12"
(30.48 cm)
11"
(27.94 cm)
max.
height
needed
for
actuator
13.5"
(34.29 cm)
max.
height
needed
for
actuator
in 9"
(22.86 cm
tab length)
3/8"
(.95 cm)
16"
(40.64 cm)
Edge Mount
Boat
Product
Length Meters Size Number
14'-18' 4.26-5.48 9" x 9" 15000-101
14'-18' 4.26-5.48 9" x 9" E 15013-101
16'-25' 4.87-7.62 9" x 12" 15001-101
16'-22' 4.87-6.71 9" x 12" E 15014-101
22'-30' 6.70-9.14 9" x 18" 15002-101
26'-40' 7.92-12.19 9" x 24" 15003 -101
30'-50' 9.14-15.24 9" x 30" 150 04 -101
34'-65' 10.36-19.81 9" x 36" 15005 -101
38'-75' 11.58-22.86 9" x 40" 150 06 -101
14'-18' 4.26-5.48 12" x 9" E 15015 -101
17'-30' 5.18-9.14 12" x 12" 15007-101
17'-30' 5.18-9.14 12" x 12" E 15016-101
26'-36' 7.92-10.99 12" x 18" 15008 -101
26'-36' 7.92-10.99 12" x 18" E 15017-101
30'-44' 9.14-13.41 12" x 24" 15009-101
34'-54' 11.58-21.03 12" x 30" 15010 -101
38'-69' 11.58-21.03 12" x 36" 15011-101
42'-79' 12.80-24.07 12" x 40" 15012-101
Standard Mount
Edge Mount
12" x 12"
width
length
Edge Mount
12" x 18"
Size Chart
In the tab size:
• First number represents tab
length
• Second number represents
tab width at hinge
• E = Edge Mount
The actuator mounts at the
trailing edge of the plane,
requiring 4" (10.16 cm) less
transom height than our
standard mount
Deutsch Connections
Waterproof
Choose one of our waterproof tactile
switches to complete your trim tab system.
Both feature electronic brakes and a built-in
Retractor for precise control and fine tuning.
The indicator switch has high intensity LED's
with a built in photo eye for full visibility in all
light conditions and NEW Self-Check feature.
Switches sold separately.
Lenco Marine, Inc.
4700 Municipal Court • Stuart, Florida 34997 • www.lencomarine.com
For more information, call: 772-288-2662 Fax: 772-288-2566
Trim Tab Kits
Indicator Tactile
Switch (123S C)
Standard
Tactile Switch
(124SSR )
© Lenco Marine 10/07
/