Pelco DX4500/4600 User manual

Type
User manual

Pelco DX4500/4600 is a versatile and powerful device that offers a wide range of features to meet your surveillance needs. With its high-resolution camera, you can capture clear and detailed images, even in low-light conditions. The built-in microphone and speaker allow for two-way audio communication, so you can hear and speak to people on the other end. The DX4500/4600 also supports remote viewing and control via a web browser or mobile app, so you can stay connected to your property from anywhere.

Pelco DX4500/4600 is a versatile and powerful device that offers a wide range of features to meet your surveillance needs. With its high-resolution camera, you can capture clear and detailed images, even in low-light conditions. The built-in microphone and speaker allow for two-way audio communication, so you can hear and speak to people on the other end. The DX4500/4600 also supports remote viewing and control via a web browser or mobile app, so you can stay connected to your property from anywhere.

Tech
Tech
Tips
Helpful Tips for Pelco Products
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Information subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.
Page 1 of 2 DX4500_4600_NO-IP.COM.fm
USING NO-IP.COM FOR DX4500/4600
WEB ADDRESS
April 10, 2008
USING NO-IP.COM FOR DDNS ON THE DX45_46 WEB ADDRESS
To change the IP address to a domain name as described in the operation/configuration manual on
page 56, follow the instructions below. If the DVR is installed in a network that has a firewall, port 8245
has to be opened to allow DDNS data to get through the firewall. For information about setting up the
firewall, refer to your network administrator or network service provider.
1. Go to www.no-ip.com
and create an account.
2. Under the Hosts / Redirects panel, select Add.
Tech
Tech
Tips
Helpful Tips for Pelco Products
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Information subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.
Page 2 of 2 DX4500_4600_NO-IP.COM.fm
3. Select a name for Hostname.
4. Under Host Type, choose the option DNS Host (A).
5. Under IP Address, insert current IP Address of the DX45_46 Server.
6. Click the Create Host button.
7. Go Back to DX45-4600 Server and the DX45-4600 Setup Menu.
8. Go to Network.
9. Go to DDNS.
10. When in the DDNS page, enter the username and password log on from No-IP.com.
Note: Username is in the form of email address.
11. Click Exit. A prompt will appear stating to save changes, click Yes.
12. Wait approximately 2 minutes for DDNS to update the address.
13. On the client PC, go to your internet browser and connect using the DDNS name.
(Ex. Mydvr.no-ip.com)
14. If the user is not behind a firewall and is directly connected to the internet, they should be able to
connect to the server.
  • Page 1 1
  • Page 2 2

Pelco DX4500/4600 User manual

Type
User manual

Pelco DX4500/4600 is a versatile and powerful device that offers a wide range of features to meet your surveillance needs. With its high-resolution camera, you can capture clear and detailed images, even in low-light conditions. The built-in microphone and speaker allow for two-way audio communication, so you can hear and speak to people on the other end. The DX4500/4600 also supports remote viewing and control via a web browser or mobile app, so you can stay connected to your property from anywhere.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI