Sharp XLDAB102BHBK Owner's manual

Category
Speaker sets
Type
Owner's manual

This manual is also suitable for

Quick Start Guide
MODEL
XL-DAB102BH
Hi Fi COMPONENT SYSTEM
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/support
Customers without internet access may telephone
0870 527 4277 during ofce hours (or (01) 676 0648
if telephoning from Ireland).
This Quick Start Guide will help you to correctly install and operate your system.
1 Accessories
Remote control x 1
(RRMCGA363AWSA)
FM/DAB aerial x 1 “AAA” size battery
(UM/SUM-4, R3, HP-16 or similar) x 2
2 Remote control battery installation
Use “AAA” size batteries (UM/SUM-4, R3, HP-16 or
similar).
1 Open the battery cover.
2 Insert the batteries according to the terminal
indicated in the battery compartment. When inserting
or removing the battery, push it toward the (–) battery
terminals.
3 Close the cover.
3 System connections
To TV audio
output socket
FM/DAB
aerial
Left
speaker
TV
Red
To LINE input
socket
Audio cable
(not supplied)
Commercially
available
Subwoofer
(Amplier Built-In)
Installing the
supplied FM/
DAB aerial
Black
To right
speaker
Wall socket
(AC 100
- 240 V ~
50/60 Hz)
Audio cable
(not supplied)
14J R MW 1
TINSEA476AWZZ
B
arcodesof
t
http://www.barcodesoft.com
Barcode Symbology:
Code 93
; Font Facename:
Code93
M
H
r
Data To Encode:
TINSEA476AWZZ
Point Size 8 :
*TINSEA476AWZZSP*|
Point Size 10 :
*TINSEA476AWZZSP*|
Point Size 12 :
*TINSEA476AWZZSP*|
Point Size 14 :
*TINSEA476AWZZSP*|
XL-DAB102BH_QG.indd 1 2014-08-28 22:57:39
4 Turn on your system
Press the ON/STANDBY button to turn the power on.
ON / ST
ANDBY
5
Listening to Bluetooth enabled devices
6
Listening on Android
TM
devices
Press the ON/STANDBY button to turn the power on.
Press the FUNCTION button (main unit) repeatedly to select
Bluetooth function. “Bluetooth” appears on the display.
Press and hold the PAIRING button for 3 seconds or more. “Start
Pairing” appears on the display.
Perform pairing procedure on the source device to detect this
unit. “XL-DAB102B SHARP” will appear in the detected devices
list (if available) in the source device. (Refer the source device
operating manual for details).
Select “XL-DAB102B SHARP” from the source list. If Passcode is
required, enter “0000”.
“Connected” appears on the display once the unit is successfully
paired with the source device.
Press the play button on main unit, remote control or source
device to start Bluetooth streaming playback.
Pairing with other Bluetooth source device
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button repeatedly (main unit) to select
USB function.
Connect the device (Smartphone/Tablet) to the unit.
Press the play button (on main unit, remote control or device).
Quit the application (apps).
Disconnect the device from the USB terminal.
1
2
3
4
5
6
7
Perform any of the followings.
Disconnect the Bluetooth connection on the audio source device.
Refer the operating manual supplied with the device.
Turn off the Bluetooth stereo audio source device.
Turn off this unit.
Note:
The volume of this unit may not be controlled as intended depending
on the device.
To disconnect the Bluetooth device
To disconnect the Android device
Android device playback
Insert the connector to the device.
1
Connect the device to the main unit via USB connector.
2
1
2
1
2
3
4
Connector
Device
(Smartphone/Tablet)
USB connector
(not supplied)
XL-DAB102BH_QG.indd 2 2014-08-28 22:57:40
  • Page 1 1
  • Page 2 2

Sharp XLDAB102BHBK Owner's manual

Category
Speaker sets
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI