RCA ANT1450B/E User manual

  • Hello! I am an AI chatbot trained to assist you with the RCA ANT1450B/E User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ANT1450 / ANT1450BF / ANT1450BFV /
ANT1450BR
Amplifi ed Flat Multi-Directional
Indoor Antenna
Antena multidireccional plana amplifi cada para interiores
User’s Guide
Guía del Usuario
Congratulations on your purchase of the Amplifi ed Flat Multi-Directional Indoor Antenna.
With this contemporary antenna, rabbit ears are a thing of the past. This sleek, attractive
antenna features the most advanced technology, including a patented engineering design that
provides excellent reception for both analog and digital TV broadcasts.
Multi-Directional Antennas
A multi-directional antenna is able to receive signals from any direction. Useful for both
analog and digital reception, the antenna looks great, facilitates optimal reception, and
requires very little space. The patented multi-directional technology ensures that the
antenna does not need to be adjusted according to the location of the transmitting signal.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any Changes or modifi cations not expressly approved by the party responsible for compliance could void the users
authority to operate this equipment.
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)
2
English
Antenna Features
The Amplifi ed Flat Multi-Directional Indoor Antenna is packed with features that make
it as functional as it is attractive. Because the antenna is multi-directional, there is no need
to constantly turn the antenna to improve reception. And, with its compact footprint, the
antenna is so unobtrusive, you can hang it on the wall, stand it up or lay it fl at. Its attractive
design complements any décor. The antenna:
Features a removable amplifi er to optimize reception of local standard defi nition and
high defi nition signals
Outperforms traditional antennas due to patented design
Eliminates constant adjustments with multi-directional reception pattern
Gets great reception in any position—lying fl at, hanging, or standing
Takes up minimal space
Features a modern, contemporary look
Antenna Hardware
Before attempting to use your antenna, please remove all parts from the box and read the
instructions carefully The antenna package includes the following items:.
1 Flat Multi-Directional Antenna with Built-In 6’ Coaxial Cable
1 Amplifi er Insert with Built-In Coaxial Cable
Removable Foot Stand
3
English
Setting Up the Antenna
Find the best location for the antenna
Before you connect the antenna, determine the best spot in your home for optimum
reception. Visit www.antennaweb.org to see where your local broadcasts are coming from.
Then, try as much as possible to avoid obstructions between these transmitters and your
antenna.
Because of its amplifi cation and multi-directional capabilities, the antenna receives UHF,
VHF, and local high-defi nition broadcasts, providing quality reception from most locations.
Note: The antenna may work well sitting on your TV or other components. However,
because electronic components can sometimes interfere with the antennas reception, you
might notice an effect on the antennas performance. Likewise, placing the antenna on
a metal surface may interfere with reception. If the antenna isnt performing as well as
expected, try moving it away from the component or placing it on another surface. Then,
re-scan for channels on your TV or converter box.
Positioning the Antenna
After locating the optimal position for your antenna, choose from one of three options:
Lay the antenna fl at The antenna has raised feet on its bottom to prevent scratching of
furniture. Make sure you place the antenna on a fl at, level surface.
Note: This is the position that usually gives optimal performance.
Hang the antenna The back of the antenna antenna has two mounting holes that can
be used for hanging. Place both holes over screws inserted in your wall.
Stand the antenna upright The antenna comes with a removable stand. Simply place
the antenna in the stand to prop the antenna in an upright position.
4
English
ANT1450
Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
To connect the antenna with the
amplifi er directly to your TV:
1. Make sure your TV is turned off.
2. Connect the antenna built-in cable to
the input jack of the amplifi er.
3. Connect the amplifi er’s built-in cable to
the antenna input on your TV.
4. Plug the amplifi er’s power cord into an
electrical outlet.
Important: This power unit is intended to be
correctly oriented in a vertical or fl oor mount
position.
5. Re-scan for channels on your TV.
2
To connect the antenna without the
amplifi er directly to your TV:
1. Make sure your TV is turned off.
2. Connect the antennas built-in coaxial
cable to the antenna input on your TV.
3. Re-scan for channels on your TV.
Connecting the Antenna
You can use the antenna with or without its amplifi er, depending on which connection gives
you the best signal. Try using the amplifi er fi rst. If you notice that youve lost channels that
you normally receive, try connecting without the amplifi er.
You can connect the antenna directly to your TV or use it with a converter box.
3 4
5
Built-In
Coaxial Cable
ANT1450
TV
2
3
antenna
antenna
5
English
To connect the antenna with the
amplifi er to a converter box:
1. Make sure your converter box is turned
off.
2. Connect the antennas built-in cable to
the input jack of the amplifi er.
3. Connect the amplifi ers cable to the
antenna input on the converter box.
4. Connect the converter box to your TV
using either audio/video cables or a
coaxial cable:
a. Audio/Video cable connection:
Connect the video (yellow) and stereo
audio (red and white) cables to the
video and audio outputs on your
converter box. Connect the other ends
to the video and audio inputs on your
TV. Make sure you match the colors
of the jacks on each—yellow plug to
yellow jack, red plug to red jack, and
white plug to white jack.
b. Coaxial cable connection: Connect a
coaxial cable to the antenna output on
your converter box. Connect the other
end of the coaxial cable to the antenna
input on your TV.
5. Plug the amplifi er’s power cord into an
electrical outlet.
Important: This power unit is intended to be
correctly oriented in a vertical or fl oor mount
position.
6. Re-scan for channels on your converter
box.
Converter Box
Coaxial
Cable
Audio/Video
Cables
Built-In
Coaxial Cable
ANT1450
TV
–or–
Amplifier
Insert
ANTENNA
TV/STB
4a
2
4b
3
5
6
antenna
6
English
To connect the antenna without the
amplifi er to a converter box:
1. Make sure your TV is turned off.
2. Connect the antennas built-in coaxial
cable to the antenna input on your
converter box.
3. Connect the converter box to your TV
using either audio/video cables or a
coaxial cable:
a. Audio/Video cable connection:
Connect the video (yellow) and stereo
audio (red and white) cables to the
video and audio outputs on your
converter box. Connect the other ends
to the video and audio inputs on your
TV. Make sure you match the colors
of the jacks on each—yellow plug to
yellow jack, red plug to red jack, and
white plug to white jack.
b. Coaxial cable connection: Connect a
coaxial cable to the antenna output on
your converter box. Connect the other
end of the coaxial cable to the antenna
input on your TV.
4. Re-scan for channels on your converter
box.
Notes: See your converter boxs owner’s
manual for more detailed connection
instructions. For additional information
about setting up your converter box, visit
www.keepmytv.com
Converter Box
Coaxial
Cable
Audio/Video
Cables
Built-In
Coaxial Cable
ANT1450
TV
–or–
3a
2
3b
4
antenna
7
English
Painting Your Antenna
You can paint the antenna to match your décor. Use only non-metal-based interior paint.
Coaxial Cable Installation Precautions
Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause
shorts and can change a cables impedance.
Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds
during installation. After installation, make sure there is no tension on the cable.
Use only round-headed staples. Any clamps or securing devices used with coax should
grip the cable evenly about the circumference without crushing the cable. Flat staples can
damage the coaxial cable.
Do not expose a coaxial cable to a temperature greater than 176 degrees Fahrenheit. Keep
the cable away from heating vents and water heaters.
12 Month Limited Warranty
VOXX Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should
this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship
within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s
option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the
product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage
(e.g. dated bill of sale), speci cation of defect(s), transportation prepaid, to the Company at the address shown below.
Do not return this product to the Retailer.
This
Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or
Canada. The Warranty does not extend to the elimination of externally generated static or noise. This Warranty does
not apply to costs incurred for installation, removal or reinstallation of the product, or, if in the Company’s opinion,
the product has been damaged through acts of nature, alteration, improper installation, mishandling, misuse, neglect, or
accident. This Warranty does not cover damage caused by
an AC adapter not provided with the product.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR
OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN
A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.
No person or representative is authorized to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives
you speci c legal rights and you may also have other rights which vary from state/province to state/province.
U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5
1/7