*5100006888 - 01*
© 2009
1.
2.
3.
4.
5.
6.
RH-PM5
RH-PM5_j.fm 1 ページ ２００９年３月１２日 木曜日 午前９時２８分
add
• In the interest of personal and public safety,
never wear the headphones while operating
any type of vehicle.
add
• Do not use the headphones in a location
where safety requires that you be able to hear
the sounds around you (such as on a train
platform, at a railroad crossing, in a factory, or
along a busy road).
add
• Using headphones for an extended time at
high volume may damage your ears or
negatively impact your hearing. Such use will
also strain the headphones themselves, so
please enjoy them at an appropriate volume.
add
• When using headphones while on public
transportation or in a public place, please be
aware of the possibility of annoyance to
people around you.
556
• Always handle either the headphones
themselves or the plug, not the cord. This will
help in maintaining the electrical integrity of
the cord by preventing any damage to it.
add
• When connecting the headphones, always
have the volume on the unit you are
connecting them to turned down to the
minimum. Damage to the headphones may
occur otherwise.
014
• Protect the unit from strong impact.(Do not
drop it!)
354a
• Do not expose the unit to direct sunlight,
place it near devices that radiate heat, leave it
inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Excessive
heat can deform or discolor the unit.
401a
• When the headphones need cleaning, wipe
them with a soft, dry cloth.
118a
• Keep the included ear pieces (and any you
detach), adaptor plug, a cord clip,
replacement filters, and filter replacement
tool out of the reach of children so that these
items will not be swallowed accidentally.
add
• If you experience any abnormality in the skin
area contacted by the headphones, immedi-
ately stop using them.
add
• When storing or transporting the
headphones, do not acutely bend the cable in
the area where it connects to the plug. That
way, you can help prevent damage to the
cable’s internal elements.
962a
* In the interest of product improvement, the specifications and/or appearance of this unit are
subject to change without prior notice.
USING THE UNIT SAFELY
SPECIFICATIONS
Type of Construction
Balanced armature type
Sensitivity
104 dB/mW
Maximum Input
2 mW
Frequency Response
20–16,000 Hz
Impedance
32
Ω
Weight
5 g (without cord)
Cord
7 feets (2.2 m) OFC litz wire
Plug
Stereo mini (gold-plated)
Accessories
Extension cord (7 feets [2.2 m] OFC litz wire, gold-plated stereo mini jack
stereo mini plug), Plug adaptor (gold-plated stereo mini plug
1/4 inches
stereo phone plug), Ear pieces (S, M, L, XL), Cord clip, Filter (x 2), Filter
replacement tool, Carrying case
Concerning the fit of the earpieces
The sound quality you’ll experience can vary depending on how well the earpieces of
this device are fitted with your eras during use. In order to enjoy the sound as it should
be heard, please wear the earpieces so that they fit snugly into your ears.
If the earpieces do not fit your ears, exchange them with either the S, M or XL sized ones,
which are included (When shipped from the factory, the L sized ones are attached.).
To remove an earpiece, grasp the body of the headphones and gently pull the tip of the
earpiece.
Wear the headphones as shown in the illustration below. The headphones will be stable
and will provide optimal audio quality.
Wearing the in ear headphones
Earpiece
In ear headphone
Slide to adjust
About the slide tube
The slide tube is used to adjust the
cable separation. Adjust it to the
appropriate location so that the cable
will not get in your way as you
play your instrument.
Slide tube
To make the headphones as secure
as possible, adjust this tube to the
appropriate position.
These headphones are designed so the cable is
routed behind the ears, keeping the cable from
swaying and reducing noises that might be
caused by movement of the cable.
L (Left)
R (Right)
The filter should be changed when you notice that it’s clogged, or when you feel that the sound
pressure has decreased considerably.
1.
Use your fingers to remove the
earpiece.
2.
Insert the filter replacement tool
into the filter (the plastic part).
Insert the tool so that it breaks through
the mesh on the surface of the tip.
The tip of the filter replacement tool is shaped
like a thread-cutting die and is pointed. Be
careful not to hurt yourself.
3.
Turn the filter replacement tool
three to five turns clockwise.
4.
Pull the filter replacement tool
straight out.
Now you can remove the filter.
Discard the filter you removed.
5.
Insert the new filter.
The filter is held in by friction. After you’ve
inserted the filter part-way using your
fingers, press it down on a table or similar
flat surface to insert it completely.
6.
Make sure that the new filter has
been securely inserted all the way.
202
Copyright © 2009 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
Replacing the filters
Earpiece
Filter replacement
IncorrectCorrect
Space
Owner´s Manual
RH-PM5
RH-PM5_e.fm 1 ページ ２００９年３月１２日 木曜日 午前９時２８分
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- 日本語: RSS RH-PM5 取扱説明書