Electrolux GA60SLISSP Quick start guide

Type
Quick start guide

This manual is also suitable for

Electrolux GA60SLISSP is a dishwasher that offers a range of features to make dishwashing easier and more efficient. With its adjustable settings, you can customize the wash cycle to suit the type of load, from delicate glassware to heavily soiled pots and pans. It also features a delay start option, allowing you to set the dishwasher to run at a time that is convenient for you. Additionally, the machine has a self-cleaning function, which helps to maintain its performance and prolong its lifespan.

Electrolux GA60SLISSP is a dishwasher that offers a range of features to make dishwashing easier and more efficient. With its adjustable settings, you can customize the wash cycle to suit the type of load, from delicate glassware to heavily soiled pots and pans. It also features a delay start option, allowing you to set the dishwasher to run at a time that is convenient for you. Additionally, the machine has a self-cleaning function, which helps to maintain its performance and prolong its lifespan.

Brief instructions
21 4
68
3
7
5
1. On/off button
2. Programme button
3. Programme indicators
4. Display
5. Delay button
6. Option button
7. Indicators
8. Start button
Programme Degree of soil, type of load
Normal soil
Crockery and cutlery
All
Crockery, cutlery, pots and pans
Mixed soil
Crockery, cutlery, pots and pans
Heavy soil
Crockery, cutlery, pots and pans
Normal soil
Crockery and cutlery
Light soil
Crockery and cutlery
Normal or light soil
Delicate crockery and glassware
Normal soil
Crockery and cutlery
All
Self-cleaning
No load
Indicators Description
Washing phase. It is on when the washing phase operates.
Rinsing phase. It is on when the rinsing phase operates.
Drying phase. It is on when the drying phase operates.
End indicator.
TimeSaver indicator.
XtraDry indicator.
Rinse aid indicator. It is always off while the programme operates.
Salt indicator. It is always off while the programme operates.
Delay button.
SprayZone indicator.
EN
OPTIONS OPERATING THE APPLIANCE
Please note that not all of the
options are compatible with every
programme and with each other.
Use one or more options for a chosen
programme to modify it as follows.
TimeSaver
Reduces duration of a selected programme.
Press
until the indicator is on.
SprayZone
Washes thoroughly items placed in the designated
area in the lower basket.
Press
until the indicator is on.
XtraDry
Boosts the drying performance.
Press
until the indicator is on.
Starting programme
1. Press On/off.
2. Press repeatedly
until the indicator
of the desired programme is on.
3. Set the applicable options.
4. Fill the detergent container with
proper washing agent.
5. Press
to start a programme.
How to save MyFavourite programme
1. Set a programme. (Press repeatedly ).
it is also possible to set applicable options.
2. Press and hold simultaneously
and until the
indicators of the programme and the options ash
for a few seconds.
How to start the MyFavourite
programme
Press and hold until the indicators that are related
to the MyFavourite programme and options come on.
Starting a programme with Delay Start
1. Set a programme.
2. Press repeatedly
to set duration of delay.
3. Press
to begin countdown.
When the countdown is completed,
the programme starts.
Cancelling a programme or
Delay Start countdown
Press and hold simultaneously and until
the appliance is in programme selection mode.
End of the programme
When the programme is completed, the
Display shows 0:00 and indicator
is on.
1. Press the on/off button or wait for the Auto Off
function to automatically deactivate the appliance.
2. Close the water tap.
Opening door during operation
When you open the door, the running programme
stops.
When you close the door, the appliance continues
from the point of interruption.
If the door stays open for longer than 30 seconds
during the drying phase, the running programme is
cancelled.
DAILY USE CARE AND CLEANING
1.
4.
2.
5.
3.
6.
1. Press the button. (A)
2. Insert detergent or tablet into
the compartment. (B)
3. If you want to choose a programme
with prewash phase, put a small
quantity of detergent on the inner
part of the appliance door.
4. Close the lid.
1. Open the salt container (turn the cup counterclockwise).
2. Fill the container with dishwasher salt using proprietary
funnel supplied with the appliance.
Add 1 litre of water rst if the dishwasher
will be used for the rst time.
3. Remove the salt around the opening of the salt container.
4. Turn the cap of the container clockwise to close it.
Set the level of water softener according to the water
hardness in your area. From level 1 to level 10.
Filling rinse aid container Setting rinse aid level
Fill the rinse aid container before rst use and when the indicator is clear. (C)
1. Open the lid. (E)
2. Fill the container until marking
reaches MAX. (D)
3. Remove spilled rinse aid.
4. Close the lid.
Set the level of the rinse aid dispenser
according to the necessary quantity of
rinse aid.
Level 0, no rinse aid.
Level 6, maximum amount of rinse aid.
Using the detergent
Do not ll the detergent container during
rst use.
Filling the salt container.
AB
CD
E
Cleaning lters
Dirty lters decrease washing results.
Presented pictures show how to
disassemble and reassemble the
lters. An incorrect position of the
lters may cause bad washing results
and damage to the appliance.
Internal cleaning
During manual cleaning, clean
the rubber gasket of the door.
Run Machine Care programme
at least once every 2 months
with a descaler or a cleaning
product designed for dishwashers
and without any load.
External cleaning
Clean the appliance with a moist, soft
cloth. Do not use abrasive products,
abrasive cleaning pads or solvents.
SAFETY INFORMATION TROUBLESHOOTING
Error codes
The appliance does
not ll with water.
or
Make sure that the water tap is open.
Make sure that the pressure of the water
supply is not too low. For this information,
contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the lter in the
inlet hose is not clogged.
Make sure that the inlet hose
has no kinks or bends.
The appliance does
not drain the water.
Make sure that the sink spigot is not clogged.
Make sure that the lter in the
outlet hose is not clogged.
Make sure that the interior lter
system is not clogged.
Make sure that the drain hose
has no kinks or bends.
The anti-ood
device is on.
Close the water tap and contact
an Authorised Service.
Water connection
Make sure not to cause damage to the water hoses.
Before you connect the appliance to new pipes or pipes not used for a long
time, let the water ow until it is clean.
The rst time you use the appliance, make sure that there is no leakage.
The water inlet hose has a safety valve and a sheath with an inner mains
cable.
Without electrical power, the water protection system is not active. In this
case there is a risk of ooding.
WARNING! Dangerous voltage.
If the water inlet hose is damaged, immediately close the water
tap and disconnect the mains plug from the mains socket. Contact
the Authorised Service Centre to replace the water inlet hose.
117875280-A-212018
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Electrolux GA60SLISSP Quick start guide

Type
Quick start guide
This manual is also suitable for

Electrolux GA60SLISSP is a dishwasher that offers a range of features to make dishwashing easier and more efficient. With its adjustable settings, you can customize the wash cycle to suit the type of load, from delicate glassware to heavily soiled pots and pans. It also features a delay start option, allowing you to set the dishwasher to run at a time that is convenient for you. Additionally, the machine has a self-cleaning function, which helps to maintain its performance and prolong its lifespan.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI