Whirlpool ART 917/G User guide
- Category
- Fridge-freezers
- Type
- User guide
This manual is also suitable for
11
CONTENTS GB
BEFORE USING THE REFRIGERATOR
PAGE
12
SAFEGUARDING THE ENVIRONMENT
PAGE
12
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
PAGE
13
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
PAGE
13
HOW TO OPERATE THE FREEZER
COMPARTMENT
PAGE
14
CARE AND MAINTENANCE
PAGE
16
TROUBLESHOOTING GUIDE
PAGE
17
AFTER-SALES SERVICE
PAGE
17
INSTALLATION
PAGE
18
CONNECTIONS
PAGE
19
33046gb.fm5 Page 11 Monday, June 12, 2000 11:51 AM
12
Your new appliance is a combined static
refrigerator and ventilated (no frost) freezer and
is for domestic use only.
The freezer compartment uses the ventilated
(No Frost) system, the great advantage of which
being that there is no formation whatever of ice
and frost on the surfaces of any component: cold
is produced by an evaporator and distributed
around the compartments by a fan.
Having circulated in the compartments, the air is
drawn back into the evaporator, which retains
the moisture. This system eliminates the
formation of frost on the walls, a common
problem with traditional appliances, which
means that
the appliance does not require
defrosting
.
The humidity retained by the evaporator is
turned into water which drains automatically into
a basin on the compressor, from where it
evaporates. The ventilated no frost system
ensures optimum storage of food, which retains
its original condition for longer.
To get the most out of your new appliance, read
the user handbook thoroughly. The handbook
contains a description of the appliance and
useful tips for storing food.
Keep this handbook for future consultation.
1.
After unpacking the appliance, make sure
that the doors shut properly. Any damage
must be reported to your dealer within 24
hours after delivery of the appliance.
2. Wait at least two hours without moving
the appliance before switching on. This
will give the refrigerant circuit time to
settle and operate efficiently.
3.
Installation of the appliance and electrical
connections must be carried out by a
qualified technician, in accordance with the
manufacturer's instructions and local
regulations.
1. Packing
The packing material is entirely recyclable, and
marked with the recycling symbol.
Follow local regulations for scrapping.
Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children,
as they are potentially dangerous.
2. Appliance
The appliance is made from recyclable
materials. Dispose of the appliance in conformity
with local environmental regulations.
Make the appliance unusable by cutting off the
power cord. The appliance must be consigned to
an authorised collection centre for the recovery
of refrigerant gas.
Information:
This appliance does not contain CFCs (replaced
with R134a) or HFCs (replaced with R600a -
Isobutane). For more information, refer to the
data plate affixed to the appliance.
BEFORE USING THE REFRIGERATOR
SAFEGUARDING THE ENVIRONMENT
33046gb.fm5 Page 12 Monday, June 12, 2000 11:51 AM
13
•
Use the
refrigerator compartment
only for
storing fresh food and beverages and use the
freezer compartment
only for storing frozen
food, freezing fresh food and making ice
cubes.
•
Do not cover or obstruct the air vents of the
appliance.
•
Do not store liquids in glass containers in the
freezer compartment - danger of bursting.
•
Do not eat ice cubes or ice lollies immediately
after taking them out of the freezer
compartment - risk of “cold” burns.
•
Do not allow children to play or hide inside
the appliance - risk of becoming trapped and
suffocating.
•
Do not ingest the contents (non-toxic) of the
ice packs (if provided).
• Before servicing or cleaning the
appliance, unplug it from the mains or
switch off the electrical power supply.
•
The power cable can only be replaced by an
authorised person.
•
After installation, make sure that the
refrigerator is not standing on the power cord.
Declaration of conformity
•
This appliance is intended to come into
contact with foodstuffs and conforms to D.L.
108 of 25.01.1992 (European
Directive 89/109/EEC).
Information
Appliances with Isobutane (R600a)
Isobutane is a naturally occurring low
environmental impact gas. Caution is required,
however, because Isobutane is inflammable.
Therefore, it is essential to ensure that
refrigerant pipelines are not damaged.
This appliance has two motors which allow
independent operation and control of the
refrigerator and freezer compartments.
Defrosting of the refrigerator compartment is
completely automatic.
The refrigerator can operate at ambient
temperature between +10°C and +38°C. Optimal
performance is obtained at temperatures
between +16°C and +32°C.
Switching on the appliance
For appliances with button panel (Fig. 1):
•
Plug in the appliance.
•
Press the refrigerator compartment “ON”
button
(1)
-The inside light switches on when
the refrigerator door is opened.
•
Press the refrigerator compartment “ON”
button
(1)
-The inside light switches on when
the refrigerator door is opened.
To switch off the refrigerator compartment
press button
(1)
again.
For appliances without button panel (Fig 2):
•
Plug in the appliance.
•
The appliance switches on automatically.
•
The inside light switches on when the
refrigerator door is opened.
To switch off the refrigerator compartment
turn the knob to
Off.
Important
•
There is no need to adjust the compartment
temperature using the thermostat knob as the
temperature is factory set to ensure the correct
storage conditions for fresh foods at an ambient
temperature between +20°C and +25°C.
•
After being switched on, the refrigerator
needs approximately 30 minutes to reach the
correct temperature to store a typical volume
of food in the refrigerator compartment.
.
PRECAUTIONS AND GENERAL RECOMMENDATIONS
HOW TO OPERATE THE
REFRIGERATOR COMPARTMENT
Fig. 2
Fig. 1
33046gb.fm5 Page 13 Monday, June 12, 2000 11:51 AM
14
To adjust the temperature, follow the
instructions in the accompanying chart.
To switch off the refrigerator
compartment:
Press the refrigerator compartment “ON” button
(1)
- if provided - or set the knob
(3)
to
Off.
Using the refrigerator compartment
Position the food as shown in the figure.
A Cooked food
B Fish, meat
C Fruit and vegetables
D Bottles
E Butter
F Dairy products, cheese
Notes:
•
The space between the shelves and the rear
wall of the refrigerator compartment must be
sufficient to allow a free circulation of air.
•
Do not place food in direct contact with the rear
wall of the refrigerator compartment.
•
Do not place hot food in the refrigerator or the
freezer.
•
Store liquids in closed containers.
•
Storing vegetables with a high water content
can cause condensation to form in the crisper
drawer; this will not affect the correct operation
of the appliance.
The freezer compartment, marked with the
symbol can be used for freezing fresh
and cooked food, making ice cubes and
storing deep-frozen and frozen food
products.
How to switch on the freezer
compartment
For appliances with button panel (fig. 1):
•
Press the freezer compartment “ON” button
(4)
.
•
The
green LED
(5)
lights up, indicating
operation of the freezer compartment.
For appliances without button panel (fig.2):
•
The freezer compartment switches on
automatically when the appliance is plugged in.
•
To switch the freezer compartment off, set
the knob to
Off.
Important:
•
There is no need to adjust the compartment
temperature using the thermostat knob as
the temperature is factory set to ensure the
correct storage conditions for fresh foods at
an ambient temperature between
+20°C and +25°C.
•
After switching on, the freezer compartment
takes approximately 3 hours to reach a
suitable temperature for frozen food storage.
To adjust the temperature, follow the
instructions in the accompanying chart.
To switch off the freezer compartment:
Press the freezer compartment “ON” button
(4)
-
if provided - or set the knob
(6)
to
Off
.
HOW TO OPERATE THE
REFRIGERATOR COMPARTMENT
HOW TO OPERATE THE FREEZER COMPARTMENT
Fig. 2
Fig 1
33046gb.fm5 Page 14 Monday, June 12, 2000 11:51 AM
15
How to freeze fresh food
You can use the freezer compartment
to freeze food.
The amount of fresh food that can be frozen in 24
hours, at an ambient temperature of +25°C, is
indicated on the data plate.
How to operate:
1.
24 hours before freezing fresh food, press
the fast freeze button
(7)
or set the
thermostat knob to (selected models
only). The
yellow LED
(8)
- if provided -
switches on and remains alight until the fast
freeze function is deactivated.
2.
Wrap and seal the food in: aluminium foil,
cling film, watertight plastic bags, polythene
containers with lids or special freezer
containers.
3.
Place food in the bottom drawer, leaving
enough space for air to circulate around
packages. For more efficient freezing, keep
the fast freeze function on for the next 24
hours.
4.
When freezing is complete, press the fast
freeze button
(7)
again - if provided - to
deactivate, or reset the freezer knob to the
original position (certain models only).
Note:
•
In the event of a power failure, the freezer
compartment maintains the correct storage
temperature for about 13/14 hours.
•
In models with one or two ice packs, this
temperature can be maintained for about 18/
24 hours.
• Do not open the freezer compartment
door during a power failure.
Important:
The table alongside shows the recommended
maximum storage time for frozen fresh foods.
When purchasing frozen food products:
•
ensure that the packaging is not damaged
(frozen food in damaged packaging may
have deteriorated). If the package is swollen
or has damp patches, it may not have been
stored under optimal conditions and
defreezing may have already begun.
•
When shopping, leave frozen food
purchases till last and carry the products
back in a thermally insulated cool bag.
•
Place frozen foods in the freezer
compartment as soon as you get home.
•
If food has defrozen even partially, do not
refreeze. Consume within 24 hours.
•
Avoid temperature variations or keep them to
a minimum.
•
Do not keep beyond the best-before date on
the package.
•
Always observe the storage information on
the package.
HOW TO OPERATE THE FREEZER COMPARTMENT
MONTHS FOOD
33046gb.fm5 Page 15 Monday, June 12, 2000 11:51 AM
16
Making ice cubes
•
Fill the ice cube tray with water to 3/4 of its
capacity, cover with the lid provided and
place in the bottom of the freezer
compartment. To speed up the formation of
ice cubes, place the ice-tray on the bottom of
the lowest drawer (as illustrated) and not in
the ice pack tray (if provided).
•
If the tray sticks to the bottom of the
compartment, do not use pointed or sharp
instruments to free it.
.
Before carrying out any cleaning operations,
unplug the appliance.
•
Clean the inside of the freezer compartment
when defrosting.
•
Periodically clean the inside of the
refrigerator compartment with a sponge
moistened with warm water and/or neutral
detergent. Rinse the interior and dry with a
soft cloth. Do not use abrasive products.
•
Clean the outside with a damp cloth. Do not
use abrasive products, scourers, stain-
removers (e.g. acetone, trichloroethylene) or
vinegar.
•
Defrosting of the refrigerator compartment is
completely automatic. Some models are
provided with a drain hole. Clean the defrost
water drain outlet regularly using the tool
supplied with the appliance. This precaution
ensures that defrost water is removed
correctly.
• Periodically clean the condenser
(radiator) at the rear of the appliance, and
the plinth, with a vacuum cleaner or brush.
Prolonged disuse
1.
Empty the refrigerator and freezer
compartments.
2.
Disconnect the appliance from the power
supply.
3.
Defrost the freezer compartment, and clean
and dry both compartments.
4.
Leave the doors open to prevent formation of
unpleasant odours.
HOW TO OPERATE THE FREEZER COMPARTMENT
CARE AND MAINTENANCE
33046gb.fm5 Page 16 Monday, June 12, 2000 11:51 AM
17
1. The appliance is not working.
•
Is there a power failure?
•
Is the plug properly inserted in the mains
socket?
•
Is the double-pole switch on?
•
Has the fuse blown?
•
Is the power cord in perfect condition?
•
Is the thermostat set to z (Stop)?
•
Are buttons 1 and 4 pressed?
2. Temperature inside the compartments is
not low enough.
•
Are the doors closed properly?
•
Is the appliance installed near a heat
source?
•
Is the thermostat setting correct?
•
Are the air circulation grilles blocked?
•
Is the condenser clean?
3. Temperature inside the refrigerator
compartment is too low.
•
Is the thermostat setting correct?
4. Water collects at bottom of refrigerator
compartment.
•
Is the defrost water drain blocked?
•
Is the thermostat setting correct?
5. The appliance is excessively noisy.
•
Is the appliance in contact with other
furniture or objects?
•
Are the pipes at the back touching or
vibrating?
6. The inside light is not working.
Perform the checks for problem 1, and then:
•
Disconnect the appliance from the mains
power supply.
•
Remove the bulb cover.
•
Check the bulb and if necessary replace it.
Use a 15W max bulb.
N.B.:
This product uses a special bulb; to
replace
do not unscrew.
Pull towards the
inside of the appliance.
7. The red LED remains alight.
See "How to operate the Freezer
Compartment".
Notes:
• The front edge of the appliance may be
hot. This prevents the formation of
condensation and is not a defect.
• Gurgling and hissing noises due to
expansion in the refrigerant circuit are
normal.
Before contacting After-Sales Service:
1.
See if you can solve the problem yourself
with the help of the Trouble-shooting guide.
2.
Switch the appliance on again to see if the
problem has been solved. If it has not,
disconnect the appliance from the power
supply and wait for about an hour before
switching on again.
3.
If the problem persists after this course of
action, contact After-Sales Service.
Specify:
•
the nature of the problem,
•
the model,
•
the Service number (the number after the
word SERVICE on the data plate on the
inside of the appliance),
•
Your full address,
•
Your telephone number and area code.
Note:
The direction of door opening can be
changed. If this operation is performed by
After-sales Service it is not covered by the
warranty.
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
33046gb.fm5 Page 17 Monday, June 12, 2000 11:51 AM
18
•
Install the appliance away from heat sources.
•
Install the appliance in a dry, well-ventilated
place.
•
Ensure that the appliance is level. Adjust the
front feet if necessary.
•
Leave at least 5 cm clearance above the
appliance.
•
The sides of some models are extended at
the rear so the appliance can be placed
directly against the rear wall. Otherwise, fit
the spacers (if supplied) on the upper part of
the condenser at the rear of the appliance.
For models without spacers, the distance
between the unit and the wall must be
at least 4.5 cm.
•
Cleaning the inside (see "Care and
Maintenance").
•
Fit the accessories supplied.
Electrical connection
•
Electrical connections must be made in
accordance with local regulations.
•
Ensure that the voltage indicated on the data
plate corresponds to the supply voltage in
your home.
• Regulations require that the appliance is
earthed.
The Manufacturer declines all liabilities
for injury to persons or animals or
damage to property resulting from failure
to observe these regulations.
•
If the plug and socket are not of the same
type, have the socket replaced by a qualified
electrician.
•
Do not use extension cables, multiple
sockets or adapters.
INSTALLATION
33046gb.fm5 Page 18 Monday, June 12, 2000 11:51 AM
19
1) ELECTRICAL CONNECTIONS
“Warning - this appliance must be
earthed”
This appliance is normally supplied with a
mains lead having a plug fitted in the factory
which has been checked for correct earth
continuity.
If the fitted plug is not suitable for your socket
outlet, or if the machine’s mains lead is not
fitted with a plug, you should fit a suitable new,
good quality plug by following the instructions in
(2) below.
Any unsuitable plug should be cut off and
disposed of in order to avoid a possible shock
hazard should it be inserted into a socket.
2) CONNECTION TO A REWIRABLE
PLUG - to be carried out only by a
qualified electrician
The wires in the mains lead are coloured in
accordance with the following code:
BLUE - “NEUTRAL” (“N”)
BROWN - “LIVE” (“L”)
GREEN AND YELLOW - “EARTH” (“E”)
To fit a new plug, proceed as follows:
2.1Polarized Plugs (e.g. 3 pin, 13 amp plug
conforming to BS 1363A)
a.
The GREEN AND YELLOW wire must be
connected to the terminal in the plug which
is marked with the letter “E” or by the Earth
symbol or coloured yellow or green and
yellow.
b.
The BLUE wire must be connected to the
terminal which is marked with the letter “N”
or coloured black.
c.
The BROWN wire must be connected to the
terminal which is marked with the letter “L”
or coloured red.
2.2Non-polarized plugs (e.g. 2 pin with side
earth contact)
The wire which is coloured GREEN AND
YELLOW must be connected to the earth contact.
The other two wires should be connected to the
two pins, irrespective of colour.
3) FUSE REPLACEMENT
If the mains lead of this appliance is fitted with
a BS 1363A 13 amp fused plug, replace the
fuse only with an A.S.T.A. approved type
conforming to BS 1362 and proceed as follows:
1.
Remove the fuse cover (A) and the fuse (B).
2.
Fit the replacement 13 A fuse into the fuse
cover.
3.
Refit both into the plug.
For all other types of plug, the supply socket
should be protected by a 16 A fuse or circuit
breaker at the distribution board.
CONNECTIONS
33046gb.fm5 Page 19 Monday, June 12, 2000 11:51 AM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Whirlpool ART 917/G User guide
- Category
- Fridge-freezers
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Whirlpool ART 856/G User guide
-
Whirlpool AQUARIUM/H/2 Owner's manual
-
Whirlpool ARC 7490/AL User guide
-
Whirlpool KVIE 2000/A User guide
-
-
-
Whirlpool ART 561/H User guide
-
Whirlpool ART 945/G User guide
-
-
NEUTRAL ARL 632/G/N-RF46 User guide