Whirlpool BSNF 8999 PB Setup and user guide

1. Control panel

Refrigerator compartment

2. LED lighting

3. Fan

4. Fan cover and antibacterial lter area

5. Shelves

6. Bottle rack

7. Cheese box + Lid

8. Multi-ow cold air area

9. Sensor cover

10. Active 0° compartment (to keep foods

fresher for longer)

11. Rating plate with commercial name

12. Fruits and vegetables crisper

13. Fridge drawer divider

14. Door reversibility kit

15. Door trays

16. Egg tray

17. Small items half balcony

18. Bottle separator

19. Bottle balcony

20. Door seal

Freezer compartment

20. Door seals

21. Freezer drawers

22. Quick Ice

23. Middle drawer: coolest zone best for

freezing fresh food

24. Freezer drawer divider

25. Shelves

PRODUCT DESCRIPTION

APPLIANCE

DAILY REFERENCE

GUIDE

Before using the appliance carefully read the Health and Safety guide.

THANK YOU FOR PURCHASING A

WHIRLPOOL PRODUCT

To receive more comprehensive help and

support, please register your product at

www. whirlpool. eu / register

WWW

You can download the Safety Instructions

and the Use and Care Guide by visiting our

website docs. whirlpool. eu and following

the instructions on the back of this booklet.

CONTROL PANEL

2 3

10 11 12

14-15 17 18

1. FRIDGE TEMPERATURE button/indicator

2. FRIDGE TEMPERATURE DISPLAY (°C)

3. VACATION MODE BUTTON

4. FREEZE CONTROL BUTTON

5. FREEZER TEMPERATURE DISPLAY (°C)

6. FREEZER TEMPERATURE button

7. ANTIBACTERIAL AIR FILTER alarm indicator

8. BLACK-OUT ALARM indicator

9. MALFUNCTION ALARM indicator

10. ON/STAND-BY button/indicator

11. FAST COOL button/indicator

12. ACTIVE 0 button/indicator

13. 6TH SENSE FRESH CONTROL indicator

14. CONNECTION STATE indicator

15. CONNECTIVITY button

16. KEY LOCK button/indicator

17. FAST FREEZE button/indicator

18. STOP ALARM button/indicator

19. DOOR OPEN ALARM indicator

This control panel has an innovative technology that will drive you are setting your fridge. When un option or a function is

activated the indicator is fully lit on; when a option is available but not selected is partially lit on.

NOTE: when you are setting temperature or interacting with the control panel, all the buttons are switched on. when you are not using

the control panel, in order to save energy it will show you only the relevant information (the temperature set, the activated options).

Every time you want to use the control panel and see all the functions, you just need to touch any button to wake up the

panel.

FIRST TIME USE

HOW TO START THE APPLIANCE

After plugging in the appliance to the mains, press the On/

Standby button to switch on. The default value settings are

displayed for refrigerator (5 °C) and for Freezer compartment

(-18°C).

After starting the appliance, wait at least 4-6 hours

before placing food into the fridge and into the freezer

compartment.

The default (factory) values of the fridge compartment

settings light-up.

ACCESSORIES

CONNECTIVITY PRE-REQUISITE

When the refrigerator is connected to Internet,You can always

monitor and operate remotely the appliance. To use this

feature You need to own:

– a smart phone running Android 4.3 (or higher) with a

1280x720 (or higher) screen or a tablet or a smart phone

running iOS 8 (or higher);

– a wireless router 2.4Ghz WiFi b/g/n connected to internet

(verify with your smart device that the signal strength

of your home wireless network close to the appliance is

good).

– Important in order to use App, You have to :

– Check if the room in which your smart appliance is

installed is covered by the signal of your home wireless

network.

– Own a IOS device (Ipad/Iphone) or Android

(Smartphone)

– Download the free “Live” app from the reference App

store or Google play of your smart device and install it on

your device.

– Subscribe (legal terms) to the service to be able to

benet of the features provided through the app.

– Register your refrigerator and connect it

to your home

wireless network.

Find detailed information on connectivity setup in the App or

in the Use & Care guide.

EGG TRAY CHEESE BOX BOTTLE RACK

BOTTLE SEPARATOR FREEZER DRAWER DIVIDER FRIDGE DRAWER DIVIDER

QUICK ICE COMPARTMENT

EUTETICS/QUICK ICE TRAYS

DAILY USE

FUNCTIONS

See Use and Care Guide for more details on functions / see last

page for information on how to obtain the Use and Care Guide

ON/STANDBY

To put the product in Stand-by, press and hold the On/

Stand By button for 3 seconds. All the indicators turn o

except On/Standby button.

Press again to reactivate the appliance.

TEMPERATURE SETTING

FRIDGE TEMPERATURE

To adjust the Fridge Temperature, press the Fridge °C button

. The Fridge Temperature can be adjusted between +2°C

and + 8°C, as shown by the Fridge Temperature Display (°C).

FREEZER TEMPERATURE

To adjust the Freezer Temperature, press the Freezer °C button

. The Freezer Temperature can be adjusted between -16°C

and -24°C, as shown by the Freezer Temperature Display (°C).

VACATION MODE

This function can be activated to reduce the energy

consumption of the appliance during a prolonged period of

time. To activate/deactivate press and hold for 3 seconds the

Vacation mode button. When the function is enabled, the

related symbol will light up.

Changing the temperature setpoint will automatically

deactivate the function.

The freezer compartment works properly.

KEY LOCK

To lock/unlock the keys of the Control Panel, press the Key

Lock button for 3 seconds: the Key Lock indicator will be

displayed for a short time and an acoustical signal will be

played.

SMART DISPLAY

This optional function can be used to save energy. When

activated, only 6th sense fresh control logo is lit on, other

buttons and the displays are switched o to minimize the

consumption.

To activate/deactivate smart display press together

temperature buttons of fridge and freezer by 3 seconds.

Remember that this function does not disconnect the

appliance from the power supply, but only reduce the power

consumed by external display

Every time you want to use the control panel and see all the

functions, you just need to touch any button to wake up the

panel.

FREEZE CONTROL

Freeze Control is an advanced technology that reduces

temperature uctuations in the whole freezer compartment

to minimum, thanks to an innovative air system, totally

independent from the fridge. Freeze burns are reduced up to

60% and food preserves its original quality and color.

To activate/deactivate the Freeze Control press the FREEZE

CONTROL button (icon)

The function works properly in a dened range of

temperature: between ‐22°C and ‐24°C. In case of Fast

freezing is engaged, the function “Freeze control” is inhibited

until the Fast Freezing function switched o.

6TH SENSE FRESH CONTROL

This function automatically works to ensure the optimal

conditions to preserve the stored food. If there are any

variations, 6th Sense Fresh Control immediately restores the

ideal conditions. Results are outstanding: freshness preserved

at best throughout the fridge cavity up to 4 times longer.

FAST COOL

Using Fast Cool function it is possible to increase the cooling

in the refrigerator compartment. The use of this function is

recommended when placing a very high quantity of food

in the refrigerator compartment. Press the Fast Cool button

to activate Fast Cool function. When activated, the Fast Cool

indicator will turn on. The function is automatically disabled

after 6 hours, or can be manually disabled by pressing Fast

Cool button.

FAST FREEZE

The use of this function is recommended when placing

a very high quantity of food to be frozen in the freezer

compartment. 24 hours before freezing fresh food, press the

Freezer button to activate the Fast Freeze function. When

activated, the Fast Freeze indicator turns on. After 24 hours

place the food to be frozen in the middle freezing zone of

freezer compartment. The function is automatically disabled

after 48 hours, or can be manually disabled by pressing Fast

Freeze button.

ACTIVE 0 COMPARTMENT

The Active 0 compartment is specically designed to maintain

a low temperature and a suitable humidity level, in order to

keep foods fresher for longer (e.g. meat, sh, cold cuts ).

Activating and deactivating the compartment

To activate/deactivate the Active 0 compartment, press the

dedicated button on the control panel.

FAN + ANTIBACTERIAL AIR FILTER

The Fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation of

stored food.

If the appliance has the Fan it can be equipped with the

antibacterial lter.

Remove it from the box placed in the crisper drawer and

insert into the fan cover.

The replacement procedure is included in the lter box.

The air lter symbol is lit on to indicates that it is expired

and need to be replaced. The lter expires in

6 months. The User Interface gives a visual

feedback, without acoustic alarm. On text

display show message “Replace air lter”. After

replaced the lter, press Stop Alarm button to

reset message on the text display/antibacterial

air lter indicator.

REMOTE CONTROL

If Your refrigerator is connected to Internet, it allows You to

operate and monitor the appliance remotely using a smart

device.

To enable Remote Control:

• Make sure router is ON

• Press connectivity button for 3 seconds until

a single tone is emitted

. At this point the

connectivity symbol is blinking WPS icon switch ON to

indicate that theprocedure has started.

• Press WPS button on Your router

• WPS indicator switch ON on user panel inform about the

connection status. WPS timeout has a duration of 2’30”.

• After successfully completed process WPS icon switch

OFF,connectivity button solid ON.

• The refrigerator is now in Remote Control mode and is

ready to be operatedvia App.

• The installation procedure need to be performed one

time.

• If the router hasn't WPS button there is an alternative way

to connect the appliance with home wireless net see User

& Care.

Use the Whirpool App to control the appliance by remote , so

You can :

– check your fridge and activate options also when you are

out of home

– manage of food inventory and shopping list, receiving

notication about food

– expiring - access additional functions as for instance the

smart party mode

– optimize energy consumptions leveraging the best

energy tari

– access further information on best use of your fridge and

suggestions for best preservation

– receive feedback about fridge status in case of alarms

While using Smart control of appliance all keys on user

interface are enable.

For more information about provisioning process follow the

app instructions or see the User Care Guide.

QUICK IDENTIFICATION OF CONNECTION STATE

ON APPLIANCE’S

Connection button state

Connection descriptions

blinks fast

Appliance searching

connection to router

blinks slowly

Appliance is connected

with router but it is not

able to connect server (for

example ADSL not working)

ON solid

Appliance is connected to

server and server recognize

the appliance

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses

LEDs light, allowing a better lightning as well as a very low

energy consumption.

If the LED light system does not work, please contact the

Service to replace it.

Important: The refrigerator compartment light switches

on when the refrigerator door is opened. If the door is kept

open for more then 10 minutes the light will be automatically

switched o.

FAN + ANTIBACTERIAL FILTER

The Fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation of

stored food.

If the appliance has the Fan it can be equipped with the

antibacterial lter.

Remove it from the box placed in the crisper drawer and

insert into the fan cover.

The replacement procedure is included in the lter box.

QUICK ICE

HOW TO MAKE ICE CUBES

Put the empty ice cube trays into the freezer 24 hours before

using the Quick Ice feature to cool them down. To achieve the

best performance of the Quick Ice trays it is recommended

to keep them permanently in the freezer and maintain

temperature setting at -18°C or colder.

Remove a Quick Ice tray by pulling it towards you.

Remove the cover and ll the tray with potable water

(maximum level = 2/3 of the overall capacity of the tray).

Insert the cover back into the tray and insert it back into the

dedicated slots in the top freezer drawer.

Take care not to spill water.

Wait at least 30 minutes until the ice cubes are formed (this

time can be slightly longer if the trays are used immediately after

the rst use).

ALARM TABLE

ALARM TYPE Signal Cause Cure

Door open

alarm

The acoustical alarm is activated

and the Alarm Indicator

blinks.

The Fridge or Freezer door has

remained open for more than 2

minutes.

Close the door or press the Stop Alarm

to mute the acoustical alarm.

Temperature

alarm

The freezer Temperature display

blinks (°C) and the Alarm

Indicator remains on.

The inside temperature is not

adequate

Press the Stop Alarm button

; the acoustical alarm stops, the

Temperature Display (°C) blinks and

the Alarm Indicator

remains on

until a temperature < -10°C is reached.

Antibacterial air

lter alarm

The Antibacterial lter alarm

indicator lit on

Finished the validity of

Antibacterial air lter.

Replace the Antibacterial air lter,

press the Alarm button to reset it.

Long black-out

alarm

The Black Out Alarm icon

remains on, the Alarm indicator

blinks and the Temperature

display (°C) blinks, showing the

maximum temperature reached

during blackout.

Prolonged power failure, able

to cause the inside temperature

to increase to 0°C.

Press the Stop Alarm button

; the

acoustical alarm stops.

Malfunction The letter “F” blinks on the display

(°C).

Product malfunction. Contact the After-sales Service.

SOME OF THE FUNCTIONAL SOUNDS

YOU MIGHT HEAR

A hissing sound when switching on the

appliance for the rst time or after a long

pause.

A gurgling sound when refrigerant uid

enters into the pipes.

BRRR sound is from the compressor

running.

Buzzing sound when water valve or fan

start working.

A cracking sound when compressor

starts.

The CLICK is from the thermostat which

adjusts how often the compressor is

running.

HOW TO STORE FOOD AND BEVERAGE

Legend

TEMPERATE ZONE

Suggested for the storage of tropical fruit, cans,

drinks, eggs, sauces, pickles, butter, jam

COOL ZONE

Suggested for storage of cheese, milk, dairy

food, delicatessen, yogurt

COOLEST ZONE

Suggested for the storage of sh, meat, cold

cuts. When Active 0° function is deactivated,

this drawer can be used to store also other

type of food, as well as winter fruit, dessert.

FRUIT & VEGETABLE DRAWER

FREEZING ZONE DRAWER

(MAX COOL ZONE) Suggested to freeze fresh/

cooked food.

FREEZER DRAWERS

Note: The Grey tone of the legend doesn’t match

with the color of drawers

FRIDGE COMPARTMENT

Use recyclable plastic, metal, aluminum

and glass containers and cling lm to

wrap foods.

Always use closed containers for liquids

and for food that may give o or be

tainted by odor or avor transfer or

cover them.

If you have a little quantity of food to

store in the refrigerator, we recommend

to use the shelves above the crisper for

fruits and vegetables since this is the

coolest area of the compartment.

Foods which give o a large amount

ethylene gas and those that are

sensitive to this gas, such as fruit,

vegetables and salad, should always

be separated or wrapped so as not to

reduce the storage life; for example do

not store tomatoes together with kiwi

fruits or cabbage.

To avoid bottles falling over, you can

use the bottle holder (available on

selected models).

Do not store food too close together to

enable sucient air circulation.

FREEZER COMPARTMENT

The freezer is the ideal storage location

for store frozen food, make ice cubes

and freeze fresh food in the freezer

compartment.

The maximum number of kilograms

of fresh food that can be frozen within

a 24-hour period is indicated on the

rating plate (…kg/24h).

If you have a little quantity of food to

store in the freezer, we recommend to

use the coldest areas of your freezer

compartment, corresponding to the

middle area.

011

400010892548

Printed in Italy

PRODUCT FICHE

WWW

The product fiche with energy data of this

appliance can be downloaded from Whirlpool website

docs . whirlpool. eu

HOW TO OBTAIN THE USE AND CARE GUIDE

WWW

Download the Use and Care Guide

from our website docs. whirlpool. eu

(you can use this QR Code), specifying the

product’s commercial code.

> Alternatively, contact our Client After-sales

Service.

CONTACTING OUR AFTERSALES SERVICE

You can find our contact details in the

warranty manual. When contacting our

Client After-sales Service, please state

the codes provided on your product's

identification plate.

Whirlpool BSNF 8999 PB Setup and user guide

Related papers

Other documents