John Lewis JLWM1206 Quick start guide

Category
Washing machines
Type
Quick start guide
Quick User’s Guide
The On/Off button with AUTO Stand-by function
The Stand-by function automatically deactivates the appliance to decrease energy consumption:
Before you press Start/Pause button,
if you do not use the appliance for
about fi ve minutes. All setings are
cancelled. Press On/Off button to
acitvate it again.
After 5 minutes from the end of the
washing programme. Press On/Off
button to acitvate it again.
Before you activate the appliance make
sure you have removed all packaging
including the transit bolts
(refer to Instalation Instruction).
For more information please always
refer to the User Manual.
Delay start3h
9h
6h
Door lock
Extra rinse
Child lock
Cottons
Cottons economy
Synthetics
Delicates
Hand wash / Wool
Silk / Lingerie
Cool wash
20 Minute refresh
TextilesExtra
Programme TemperatureSpin
Option
Start /
Pause
Extra rinse
Child lock
Off
On
/
1000
Rinse hold
None
800
Easy iron
Quick
Intensive
Rinse / Drain
Spin / Drain
1200
Cold
30º
40º
60º
90º
/ Drain
87621 3 4 5
1. On/Off button
2. Programme selection touchpad
3. Temperature selection
4. Spin selection touchpad
5. Option selection touchpad
6. Start/Pause selection touchpad
7. Indicators:
Child lock
Extra rinse
Door lock
8. Delay start touchpad
Control Panel
Liquid or powder detergent
34
12
A
B
The detergent dispenser
Compartment for prewash or
intensive phase.
If you use liquid detergent, put it
imediately before you start the
programme.
Compartment for liquid additives
(fabric conditioner, starch).
Caution! Do not
exceed the Max level.
Flap for powder or liquid detergent.
Position A for powder detergent
(factory setting).
Position B for liquid detergent.
When you use the liquid detergent:
Do not use gelatinous or thick liquid
detergents.
Do not put more liquid then the
maximum level.
Do not set the delay start.
Programmes
Programme
Temperature range
Maximum load
Maximum spin
speed
Programme description
(Type of load and soil level)
Cottons
90°C - Cold
7 kg
1200 rpm
White cotton and coloured cotton.
Normal soil and light soil.
Cottons economy
60°C - 40°C
7 kg
1200 rpm
White cotton and colour-fast cotton.
Normal soil.The energy consumption decreases and the
time of washing programme is extended.
Synthetics
60°C - Cold
3 kg
1200 rpm
Synthetic items or mixed fabric items.
Normal soil.
Delicates
40°C - Cold
3 kg
1200 rpm
Delicate fabrics as acrylics, viscose, polyester
items.
Normal soil.
Hand wash/Wool
40°C - Cold
2 kg
1200 rpm
Machine washable wool, hand washable wool ans
delicate fabrics with “hand washing” care symbol.
Silk/Lingerie
30°C
1 kg
800 rpm
Special programme for silk and mixed synthetics
items.
20 Minute refresh
40°C - 30°C
1 kg
1200 rpm
A very short cycle for cottons and synthetics items
with light soil level or worn only once.
Cool wash
20°C
2 kg
1200 rpm
Special programme for cotton, synthetic and mixed
fabrics with light soil. Set this programme to decrease the
energy consumption. Make sure that the detergent is for
low temperature in order to have good washing results.
Before you activate the appliance read the
Safety Information in the User Manual.
Press and hold for a couple of seconds the
On/Off button to activate or deactivate the
appliance. A tune sounds when the appliance
is activated. The aplliance performs a start
up animation. The animation quickly shows
each washing programme and the default
temperature and spin settings.
1. Touch the Programme button and set the
programme:
The indicator of the button Start/Pause
ashes slowly.
2. If necessary, change the temperature and the
spin speed or add available options. When
you activate an option, the indicator of the
set option comes on.
Activating the appliance Setting a programme
Troubleshooting
Warning!
Refer to Safety chapter in User
Manual.
Clean the appliance fi lter regularly.
Refer to ‘Care and Cleaning’
chapter in user manual.
Warning!
Deactivate the appliance before
you do the checks.
If appliance is overloaded, remove
some items from the drum and/or keep
pressed the door and push the
Start/Pause button at the same time until
the indicator Door lock stops fl ashing
(see the picture below).
The indicator of button Start/Pause fl ashes in
red 11 times and 1 (or 2 or 3) time(s) in yellow:
The mains supply is unstable. Wait until the
mains supply is stable.
Introduction
Care and cleaning
The start of appliance does not occur or it stops
during operation.
First try to fi nd solution to the problem (refer
to the table in user manual). If not, contact the
Authorised Service Centre.
With some problems, the acoustic signals
operate. The indicator of button Start/Pause
ashes red and one of the indicators comes on,
to show an alarm code:
Child lock - The appliance does not fi ll with
water properly.
Extra rinse - The appliance does not drain the
water.
Door lock - The appliance door is open or not
closed correctly. Please chceck the door!
192967021-A-192017
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

John Lewis JLWM1206 Quick start guide

Category
Washing machines
Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI