Ikelite Zoom / Focus Gear 5509.21 User manual

5509.21 Zoom Sleeve

for

Canon EF 24-70mm 1:4L IS USM Lens

I n s t r u c t i o n M a n u a l

- Zoom Sleeve for Canon EF 24-70mm 1:4L IS USM Lens

A special zoom sleeve for use with the Canon EF 24-70mm 1:4L IS USM

lens when used Canon DSLR cameras in an Ikelite DSLR Housing.

Thank you for choosing Ikelite equipment. Please read this instruction

manual completely before attempting to operate or dive with this product.

Included in Box

1. Install camera body into the housing without the Canon 24-70mm lens.

2. Slide the Zoom Sleeve onto the lens as shown in Diagram A.

Diagram A

Installing the Zoom Sleeve

3. Slide the Zoom Sleeve forward onto the lens zoom ring, Diagram B.

Diagram B

Installing the Zoom Sleeve -

continued

4. Insert camera lens through front port opening and align with lens

mounting indicator on the camera body, Diagram C.

Rotate lens clockwise until lens locks into place.

5. Align and mesh Zoom Sleeve Teeth with small Black Housing Gear.

6. Housing port can now be installed and secured (see housing instruction

manual).

Diagram C

Zoom Sleeve Teeth

Black Housing Gear

5509.21_Zoom_Sleeve_1-0115

Ikelite Underwater Systems

50 West 33rd Street

Indianapolis, IN 46208 USA

This product is warranted against any manufacturing defects for a period of

one year from the original date of purchase. Defective products should be

returned prepaid to Ikelite. Ikelite will, at its discretion, repair or replace such

products, and will return to customer prepaid. All other claims of any nature

are not covered. Except as mentioned above, no other warranty expressed

or implied, applies to this Ikelite product.

Ikelite Limited Warranty