Ikelite Zoom / Focus Gear 5509.21 User manual

Type
User manual
5509.21 Zoom Sleeve
for
Canon EF 24-70mm 1:4L IS USM Lens
I n s t r u c t i o n M a n u a l
- Zoom Sleeve for Canon EF 24-70mm 1:4L IS USM Lens
A special zoom sleeve for use with the Canon EF 24-70mm 1:4L IS USM
lens when used Canon DSLR cameras in an Ikelite DSLR Housing.
Thank you for choosing Ikelite equipment. Please read this instruction
manual completely before attempting to operate or dive with this product.
Included in Box
2
1. Install camera body into the housing without the Canon 24-70mm lens.
2. Slide the Zoom Sleeve onto the lens as shown in Diagram A.
Diagram A
Installing the Zoom Sleeve
3. Slide the Zoom Sleeve forward onto the lens zoom ring, Diagram B.
Diagram B
3
Installing the Zoom Sleeve -
continued
4. Insert camera lens through front port opening and align with lens
mounting indicator on the camera body, Diagram C.
Rotate lens clockwise until lens locks into place.
5. Align and mesh Zoom Sleeve Teeth with small Black Housing Gear.
6. Housing port can now be installed and secured (see housing instruction
manual).
Diagram C
Zoom Sleeve Teeth
Black Housing Gear
5509.21_Zoom_Sleeve_1-0115
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
This product is warranted against any manufacturing defects for a period of
one year from the original date of purchase. Defective products should be
returned prepaid to Ikelite. Ikelite will, at its discretion, repair or replace such
products, and will return to customer prepaid. All other claims of any nature
are not covered. Except as mentioned above, no other warranty expressed
or implied, applies to this Ikelite product.
© 2015 Ikelite Underwater Systems
Ikelite Limited Warranty
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Ikelite Zoom / Focus Gear 5509.21 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI