ESAB Tradesarc Dual 141i User manual

Category
Welding System
Type
User manual

ESAB Tradesarc Dual 141i is a small, portable, inverter-based power source suitable for MMA (stick) or TIG welding using the scratch start method. With a maximum welding current of 140A, it operates from either 230V or 110V single-phase AC electricity supplies. The unit automatically adjusts to match the mains input supply, 230V or 110V as necessary, eliminating the need for internal adjustments. It provides a smooth and stable arc, making it suitable for a wide range of welding applications.

ESAB Tradesarc Dual 141i is a small, portable, inverter-based power source suitable for MMA (stick) or TIG welding using the scratch start method. With a maximum welding current of 140A, it operates from either 230V or 110V single-phase AC electricity supplies. The unit automatically adjusts to match the mains input supply, 230V or 110V as necessary, eliminating the need for internal adjustments. It provides a smooth and stable arc, making it suitable for a wide range of welding applications.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

ESAB Tradesarc Dual 141i User manual

Category
Welding System
Type
User manual

ESAB Tradesarc Dual 141i is a small, portable, inverter-based power source suitable for MMA (stick) or TIG welding using the scratch start method. With a maximum welding current of 140A, it operates from either 230V or 110V single-phase AC electricity supplies. The unit automatically adjusts to match the mains input supply, 230V or 110V as necessary, eliminating the need for internal adjustments. It provides a smooth and stable arc, making it suitable for a wide range of welding applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI