4
EN
IMPORTANT
SAFEGUARDS
Read these instructions carefully and
retain them for future use. If this product
is passed to a third party, then these
instructions must be included.
When using the product, basic safety precautions
should always be followed to reduce the risk of injury
including the following:
• This product intended for spot cleaning of private
cars when a foam is desired to increase surface
contact. The product combines a high pressure
water flow mixed with detergent and air to
produce thick clinging foam.
• This product is not intended for commercial
use. No liability will be accepted for damages
resulting from improper use or non-compliance
with these instructions.
• Always wear eye protection and protective
gloves. Do not spray jet into eyes or other body
parts.
• Do not direct the spray jet directly on equipment
containing electrical components.
• Spray in well ventilated, open area.
• Do not exceed maximum pressure of 60-85 PSI
(4-6 bar).